journal article·2003-09

Stabilization of thermosolutal convective instabilities in Ni-based single-crystal superalloys: Carbide precipitation and rayleigh numbers

S. Tin, T. M. Pollock

Publisher page

Abstract

The influence of carbide precipitation on grain-defect formation during unidirectional solidification of experimental single-crystal Ni-based superalloys has been assessed over a wide range of compositions with large variations in Re, W, and Ta. In all instances, carbon additions of up to 0.15 wt pct were determined to be statistically significant with respect to stabilizing against the formation of grain defects, such as freckle chains, during solidification. Assessment of the segregation behavior of the constituent alloying additions via a Scheil-type analysis enabled estimation of critical Rayleigh numbers denoting the onset of thermosolutal convection. Precipitation of Ta-rich MC carbides near the liquidus temperature of the alloy was found to interact strongly with the mechanisms associated with freckle formation. Segregation analyses and phase-transformation temperature measurements were used to assess the corresponding Rayleigh numbers for the experimental alloys and to modify the Rayleigh criterion to account for carbide precipitation. Mechanisms pertaining to the interaction of carbides with the onset of thermosolutal convection are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. S.M. Copley, A.F. Giamei, S.M. Johnson, and M.F. Hornbecker: Metall. Trans., 1970, vol. 1, pp. 2193–204.10.1007/BF02643435 ↗
2. A.F. Giamei and B.H. Kear: Metall. Trans., 1970, vol. 1, pp. 2185–92.10.1007/BF02643434 ↗
3. J.S. Tu and R.K. Foran: JOM, 1992, vol. 44(6), pp. 26–28.10.1007/BF03222250 ↗
4. A.K. Sample and A. Hellawell: Metall. Trans., 1984, vol. 15A, pp. 2163–73.10.1007/BF02647099 ↗
5. T.M. Pollock and W.H. Murphy: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1081–94.10.1007/BF02649777 ↗
6. T.M. Pollock, W.H. Murphy, E.H. Goldman, D.L. Uram, and J.S. Tu: Superalloys 1992, TMS, Warrendale, PA, 1992, pp. 125–34.
7. M. Meyer ter Vehn, D. Dedecke, U. Paul, and P.R. Sahm: Superalloys 1996, TMS, Warrendale, PA, 1996, pp. 471–79.
8. C. Beckermann, J.P. Gu, and W.J. Boettinger: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2545–57.10.1007/s11661-000-0199-7 ↗
9. J.P. Gu, C. Beckermann, and A.F. Giamei: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1533–42.10.1007/s11661-997-0215-2 ↗
10. S.N. Tewari, R. Shah, and M.A. Chopra: Metall. Trans. A, 1993, vol. 24A, pp. 1661–69.10.1007/BF02646605 ↗
11. M.G. Worster: J. Fluid Mech., 1992, vol. 237, pp. 649–69.10.1017/S0022112092003562 ↗
12. M.C. Schneider, J.P. Gu, C. Beckermann, W.J. Boettinger, and U.R. Kattner: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1517–31.10.1007/s11661-997-0214-3 ↗
13. M.C. Schneider and C. Beckermann: Int. J. Heat Mass Transfer, 1995, vol. 38 (18), pp. 3455–73.10.1016/0017-9310(95)00054-D ↗
14. J.R. Sarazin and A. Hellawell: Metall. Trans. A, 1988, vol. 19A, pp. 1861–71.10.1007/BF02645156 ↗
15. R. Mehrabian, M. Keane, and M.C. Flemings: Metall. Trans., 1970, vol. 1, pp. 1209–20.10.1007/BF02900233 ↗
16. A. Hellawel, J.R. Sarazin, and R.S. Steube: Phil. Trans. R. Soc. London A, 1993, vol. 345, pp. 507–44.10.1098/rsta.1993.0143 ↗
17. P.K. Sung and D.R. Poirier: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2173–81.10.1007/s11661-999-0029-5 ↗
18. S. Tin, T.M. Pollock, and W.T. King: Superalloys 2000, TMS, Warrendale, PA, 2000, pp. 201–10.
19. S. Tin, T.M. Pollock, and W. Murphy: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1743–53.10.1007/s11661-001-0151-5 ↗
20. W. Yang, W. Chen, K.M. Chang, S. Mannan, and J. deBarbadillo: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 397–406.10.1007/s11661-001-0271-y ↗
21. P. Auburtin, T. Wang, S.L. Cockcroft, and A. Mitchell: Metall. Mater. Trans., 2000, vol. 31B, pp. 801–11.10.1007/s11663-000-0117-9 ↗
22. M.G. Worster: Ann. Rev. Fluid Mech., 1997, vol. 29, pp. 91–122.10.1146/annurev.fluid.29.1.91 ↗
23. P.K. Sung, D.R. Poirier, and E. McBride: Mater. Sci. Eng., 1997, vol. A231, pp. 189–97.10.1016/S0921-5093(97)00074-9 ↗
24. W. Kurz and D.J. Fisher: Fundamentals of Solidification, 3rd ed. Trans Tech Publications Ltd. Aedermannsdorf, Switzerland, 1992, pp. 289–93.
25. M.F.X. Gigliotti and M.F. Henry: Conf. on In-Situ Composites II, Xerox Individualized Publishing, Lexington, MA, 1976, pp. 253–61.
26. M.R. Jackson: Metall. Trans. A, 1997, vol. 8A, pp. 905–13.
27. C. Tianyi and Z. Shouhya: J. Mater. Sci. Let., 1990, vol. 9, pp. 820–22.10.1007/BF00720170 ↗
28. P.N. Quested and M. McLean: Mater. Sci. Eng., 1984, vol. 65, pp. 171–80.10.1016/0025-5416(84)90210-6 ↗
29. R. Fernandez, J.C. Lecomte, and T.Z. Kattamis: Metall. Trans. A, 1978, vol. 9A, pp. 1381–86.10.1007/BF02661809 ↗
30. A.V. Catalina, S. Mukherjee, and D.M. Stefanescu: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2559–68.10.1007/s11661-000-0200-5 ↗
31. J.L. Walter and H.E. Cline: Conf. in In Situ Composites, Washington, National Academy of Sciences-NAE, D.C., 1972, pp. 61–74.
32. J. Chen, J.H. Lee., C.Y. Jo, S.J. Choe, and Y.T. Lee: Mater. Sci. Eng., 1998, vol. A247, pp. 113–25.10.1016/S0921-5093(97)00761-2 ↗
33. A.K. Bhambri, T.Z. Kattamis, and J.E. Morral: Metall. Trans., B, 1975, vol. 6B, pp. 523–37.10.1007/BF02913844 ↗
34. W.R. Sun, J.H. Lee, S.M. Seo, S.J. Choe, and Z.Q. Hu: Mater. Sci. Eng. A, 1999, vol. A271, pp. 143–49.10.1016/S0921-5093(99)00189-6 ↗
35. S.N. Tewari and R. Shah: Metall. Mater. Trans., 1996, vol. 27A, pp. 1353–62.10.1007/BF02649872 ↗
36. N. Streat and F. Weinberg: Metall. Trans., 1972, vol. 3, pp. 3181–84.10.1007/BF02661331 ↗
37. M.I. Bergman, D.R. Fearn, J. Bloxham, and M.C. Shannon: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 859–66.10.1007/s11661-997-0073-y ↗
38. G. Amberg and G.M. Homsy: J. Fluid. Mech., 1993, vol. 252, pp. 79–98.10.1017/S0022112093003672 ↗
39. P. Auburtin, S.L. Cockcroft, and A. Mitchell: Superalloys 1996, TMS, Warrendale, PA, 1996, pp. 443–50.
40. S.A. Thorpe, P.K. Hutt, and R. Soulsby: J. Fluid Mech., 1969, vol. 38(2), pp. 375–400.10.1017/S0022112069000231 ↗
41. G.C. Vliet: Heat Transfer, 1969, vol. 91, pp. 511–16.10.1115/1.3580235 ↗
42. R. Mehrabian, M.A. Keane, and M.C. Flemings: Metall. Trans., 1970, vol. 1, pp. 3238–41.10.1007/BF03038445 ↗
43. M.C. Flemings and G.E. Nereo: Trans. AIME, 1968, vol. 242, pp. 50–55.
44. M.C. Flemings and G.E. Nereo: Trans. AIME., 1967, vol. 239, pp. 1449–461.
45. M.C. Flemings, R. Merahbian, and G.E. Nereo: Trans. AIME, 1968, vol. 242, pp. 41–49.