journal article·2008-04Open access

Constitutive Model for Aluminum Alloys Exposed to Fire Conditions

J. Maljaars, F. Soetens, L. Katgerman

Abstract

An existing constitutive model for creep, developed by Dorn and Harmathy, is modified in order to be used for fire-exposed aluminum alloys. Two alloys, 5083-O/H111 and 6060-T66, are selected for the development of this constitutive model because of their different behavior at elevated temperature and their frequent application in structures for which fire design is relevant. The material parameters in the model are calibrated with the experimental results of creep tests, carried out with constant load and temperature in time. The model is validated with so-called transient state tests, with a constant load in time (stresses ranging from 20 to 150 N/mm2) and with an increasing temperature (with heating rates ranging from 1.6 °C/min to 11 °C/min and critical temperatures ranging from 170 °C to 380 °C). These tests are considered as representative for fire-exposed, insulated aluminum members. The existing constitutive model of Dorn and Harmathy provides good agreement with the transient state tests carried out for the 5xxx series alloy, but appeared to be not suited for the 6xxx series alloy. This is attributed to the early development of tertiary creep in case of 6xxx series alloys. The existing model was modified to incorporate this first stage of tertiary creep, to arrive at a good agreement between the tests and the modified model for 6xxx series alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. J. Maljaars, F. Soetens, and L. Twilt: 4th Int. Workshop Structures in Fire, P. Vila Real, J.M. Franssen, and N. Lopes, eds., Universitade de Aveiro, Aveiro, Portugal, 2006, vol. 1, pp. 75–88
2. S. Lundberg: Hydro Aluminium R&D Karmøy, Håvik, Norway, Mechanical Properties at Elevated Temperature for Aluminium Alloys, European Committee for Standardization Document CEN/TC 250/SC 9/PT Fire/N-27, unpublished research, 2003
3. EN 1999-1-2: Design of Aluminium Structures–Part 1–2: General Rules–Structural Fire Design, European Committee for Standardization CEN/TC 250, Mar. 2007, pp. 18–21
4. F.M Mazzolani: Aluminium Alloy Structures, 2nd ed., Chapman & Hall, London, 1995, pp. 41–63
5. B. Faggiano, G. De Matteis, R. Landolfo, M. Mazzolani: J. Civil Eng. Management, 2004, vol. 10, (2), pp. 183–9010.1080/13923730.2004.9636305 ↗
6. J.E. Dorn: J. Mech. Phys. Solids, 1954, vol. 3, pp. 85–11610.1016/0022-5096(55)90054-5 ↗
7. T.Z. Harmathy: J. Basic Eng., 1967, vol. 89, pp. 496–50210.1115/1.3609648 ↗
8. J. Thor: Deformations and Critical Loads of Steel Beams under Fire Exposure Conditions, Doc. D 16, National Swedish Building Research, Stockholm, 1973, pp. 14–51
9. J.G. Kaufman: Properties of Aluminium Alloys—Tensile, Creep, and Fatigue Data at High and Low Temperatures, 1st ed., ASM, Metals Park, OH, 1999, pp. 109–98
10. C. Zener, H.H. Holloman: J. Appl. Phys., 1944, vol. 15, p. 2210.1063/1.1707363 ↗
11. H.J. McQueen, J.J. Jonas: in Metal Forming, Interrelation Between Theory and Practice, A.L. Hoffmanner, ed., Plenum Publishing Corp., New York, NY, 1971, pp. 393–42810.1007/978-1-4615-1757-3_18 ↗
12. H.R. Voorhees and J.W. Freeman: Report on the Elevated-Temperature Properties of Aluminium and Magnesium Alloys, ASTM STP No. 291, ASTM, Philadelphia, PA, 1960, pp. 109–12
13. J.N. Webb: C.P. No. 1367, Aeronautical Research Council, London, UK, 1977, pp. 10–12
14. A. Airod, R. Petrov, R. Colás, Y. Houbaert: Mater. Forum, 2004, vol. 28, pp. 293–99
15. T. Sheppard, A. Jackson: Mater. Sci. Technol., 1997, vol. 13, pp. 203–0910.1179/mst.1997.13.3.203 ↗
16. M.A. Wells, I.V. Samarasekera, E.B. Hawbolt, J.K. Brimacombe, and R. Bolingbroke: in Light Metals Processing and Applications, C. Bickert, M. Bouchara, and G. Davies, eds., Canadian Institute of Mining, Metallurgy, and Petroleum, Quebec City, PQ, Canada, 1993, pp. 483–93
17. W.M. Haaften: Constitutive Behaviour and Hot Tearing During Aluminium DC Casting, Delft University of Technology, Delft, Netherlands, 2002, pp. 20–29
18. Y. Li, T.G. Langdon: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2523–3110.1007/s11661-998-0224-9 ↗
19. W.N. Findley, J.S. Lai, K. Onaran: Creep and Relaxation of Nonlinear Viscoelastic Materials, Dover Publications, Inc., New York, NY, 1989, p. 5
20. J. Witteveen and L. Twilt: Proc. IABSE, IABSE, Zurich, Switzerland, 1975, vol. 23, pp. 162–70