journal article·2009-10Open access

Correlation between Electrical Resistivity, Particle Dissolution, Precipitation of Dispersoids, and Recrystallization Behavior of AA7020 Aluminum Alloy

A.R. Eivani, H. Ahmed, J. Zhou, J. Duszczyk

Abstract

This research concerns the effect of homogenization treatment on the electrical resistivity of AA7020 aluminum alloy variants with different Zr and Cr contents. Small changes in the Zr and Cr contents of the as-cast alloy increase the electrical resistivity significantly. After employing various homogenization treatments, the electrical resistivity decreases, which is due to the depletion of Zr, Cr, and Mn in the matrix, by forming small dispersoids. The optimum treatment proposed in order to obtain the smallest recrystallized grains is to hold the material at 550 °C for 24 hours, which results in the lowest electrical resistivity. The viability of the proposed treatment was tested through hot compression tests and static annealing. Indeed, the samples homogenized at 550 °C for 24 hours showed the smallest recrystallized grains compared to those homogenized at other temperatures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. T. Sheppard: Extrusion of Aluminum Alloys, Kluwer Academic Publishers, Dordrecht, The Netherlands, 1999, pp. 227–52.10.1007/978-1-4757-3001-2 ↗
2. M. Peters, J. Eschweiler, and K. Welpmann: Scripta Metall., 1986, vol. 20 (2), pp. 259–64.10.1016/0036-9748(86)90138-9 ↗
3. O. Daaland and E. Nes: Acta Mater., 1996, vol. 44, pp. 1389–1411.10.1016/1359-6454(95)00289-8 ↗
4. Y.J. Li and L. Arnberg: Acta Mater., 2003, vol. 51 (12), pp. 3415–28.10.1016/S1359-6454(03)00160-5 ↗
5. L. Lodgaard and N. Ryum: Mater. Sci. Eng., A, 2000, vol. 283, pp. 144–52.10.1016/S0921-5093(00)00734-6 ↗
6. M. Cabibbo, E. Evangelista, C. Scalabroni, and E. Bonetti: Mater. Sci. Forum, 2006, vols. 503–504, pp. 841–46.10.4028/www.scientific.net/MSF.503-504.841 ↗
7. L. Lodgaard and N. Ryum: Mater. Sci. Technol., 2000, vol. 16 (6), pp. 599–604.10.1179/026708300101508315 ↗
8. D.H. Lee, J.H. Park, and S.W. Nam: Mater. Sci. Technol., 1999, vol. 15 (4), pp. 450–55.10.1179/026708399101505923 ↗
9. R.A. Jeniski, B. Thanaboonsombut, and T.H. Sanders: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 19–27.10.1007/BF02647743 ↗
10. J.D. Robson and P.B. Prangnell: Acta Mater., 2001, vol. 49, pp. 599–613.10.1016/S1359-6454(00)00351-7 ↗
11. J.D. Robson: Mater. Sci. Eng., A, 2002, vol. 338, pp. 219–29.10.1016/S0921-5093(02)00061-8 ↗
12. J.D. Robson: Acta Mater., 2004, vol. 52, pp. 1409–21.10.1016/j.actamat.2003.11.023 ↗
13. S.V. Senkova, O.N. Senkov, and D.B. Miracle: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3569–75.10.1007/s11661-006-1051-5 ↗
14. O.N. Senkov, R.B. Bhat, S.V. Senkova, and J.D. Schloz: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2115–26.10.1007/s11661-005-0332-8 ↗
15. B. Morere, R. Shahani, C. Maurice, and J. Driver: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 625–32.10.1007/s11661-001-0079-9 ↗
16. A. Deschamps and Y. Bréchet: Mater. Sci. Eng., A, 1998, vol. 251 (1–2), pp. 200–07.10.1016/S0921-5093(98)00615-7 ↗
17. C. Panseri and T. Federighi: J. Inst. Met., 1966, vol. 94, pp. 99–107.
18. P.L. Rossiter: The Electrical Resistivity of Metals and Alloys, Cambridge University Press, Cambridge, United Kingdom, 1987, pp. 1–73.10.1017/CBO9780511600289 ↗
19. J.T. Edwards and A.J. Hillel: Philos. Mag., 1977, vol. 35 (5), pp. 1221–29.10.1080/14786437708232948 ↗
20. A. Thakur, R. Raman, and S.N. Malhorta: J. Mater. Process. Technol., 2007, vol. 194, pp. 184–86.10.1016/j.jmatprotec.2007.04.104 ↗
21. S. Esmaeili, D.J. Lloyd, and W.J. Poole: Mater. Lett., 2005, vol. 59 (5), pp. 575–77.10.1016/j.matlet.2004.10.052 ↗
22. R. Ferragut, A. Somoza, and I. Torriani: Mater. Sci. Eng., A, 2002, vol. 334 (1–2), pp. 1–5.10.1016/S0921-5093(01)01771-3 ↗
23. K. Asano, M. Abe, and A. Fujiwara: Mater. Sci. Eng., 1976, vol. 22 (1), pp. 61–70.10.1016/0025-5416(76)90135-X ↗
24. I. Kovács, J. Lendvai, and T. Ungár: Mater. Sci. Eng., A, 1975, vol. 21, pp. 169–75.10.1016/0025-5416(75)90212-8 ↗
25. E. Cerri and P. Leo: Mater. Sci. Eng., A, 2005, vols. 410–411, pp. 226–29.10.1016/j.msea.2005.08.135 ↗
26. M.A. Gaffar, A. Gaber, M.S. Mostafa, and E.F. Abo Zeid: Mater. Sci. Eng., A, 2007, vol. 465 (1–2), pp. 274–82.10.1016/j.msea.2007.02.023 ↗
27. Y. Li and L. Arnberg: TMS Light Metals, TMS, Warrendale, PA, 2003, pp. 991–97.
28. S.I. Vooijs, S.B. Davenport, I. Todd, and S. Van Der Zwaag: Philos. Mag., 2001, vol. 8 (8), pp. 2059–72.10.1080/01418610108216652 ↗
29. F.A. Sloof, J. Zhou, and J. Duszczyk: 7th Int. Conf. Magnesium Alloys and Their Applications, Wiley-VCH, Weinheim, Germany, 2006, pp. 324–29.
30. “ASTM E 112-96 Standard Test Methods for Determining Average Grain Size,” Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2004, vol. 03.01, pp. 1–26.
31. H. Ahmed, A.R. Eivani, J. Zhou, and J. Duszczyk: Proc. 11th Int. Conf. on Aluminum Alloys, Wiley-VCH Verlag GmbH & Co. KGaA, Aachen, Germany, 2008, vol. 1, pp. 621–28.
32. A.R. Eivani, H. Ahmed, J. Zhou, and J. Duszczyk: unpublished research, 2009.
33. A.R. Eivani, H. Ahmed, J. Zhou, and J. Duszczyk: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 717–28.10.1007/s11661-008-9741-9 ↗
34. A.R. Eivani, H. Ahmed, J. Zhou, and J. Duszczyk: Proc. 11th Int. Conf. on Aluminum Alloys (ICAA 11), Wiley-VCH Verlag GmbH & Co. KGaA, Aachen, Germany, 2008, pp. 993–99.
35. B. Raeisinia, W.J. Poole, and D.J. Lloyd: Mater. Sci. Eng., A, 2006, vol. 420, pp. 245–49.10.1016/j.msea.2006.01.042 ↗
36. K. Matsumoto, S. Komatsu, M. Ikeda, B. Verlinden, and P. Ratchev: Mater. Trans. JIM, 2000, vol. 41, pp. 1275–81.10.2320/matertrans1989.41.1275 ↗
37. A. Jackson and T. Sheppard: Proc. 6th Int. Aluminum Extrusion Technol. Conf., Aluminum Association, Washington, DC, 1996, vol. 1, pp. 541–50.
38. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier Science, Inc., Oxford, United Kingdom, 1995, pp. 109–14.
39. C.S. Smith: Trans. TMS-AIME, 1948, vol. 175, pp. 15–51.
40. M.F. Ashby, J. Harper, and J. Lewis: Trans. TMS-AIME, 1969, vol. 245, pp. 413–20.