Influence of Solidification Thermal Parameters on the Columnar-to-Equiaxed Transition of Aluminum-Zinc and Zinc-Aluminum Alloys
Source abstract
Abstract
Understanding the interaction between the parameters involved in the columnar-to-equiaxed transition (CET) has gained considerable attention over the last two decades in the study of the structure of ingot castings. The present investigation was undertaken to investigate experimentally the directional solidification of Al-Zn and Zn-Al (ZA) alloys under different conditions of superheat and heat-transfer efficiencies at the metal/mold interface. The CET is observed; grain sizes are measured and the observations are related to the solidification thermal parameters: cooling rates, growth rates, thermal gradients, and recalescence determined from the temperature vs time curves. The temperature gradient in the melt, measured during the transition, is between –0.338 °C/mm and 0.167 °C/mm. In addition, there is an increase in the velocity of the liquidus front faster than the solidus front, which increases the size of the mushy zone. The size of the equiaxed grains increases with distance from the transition, an observation that was independent of alloy composition. The observations indicate that the transition is the result of a competition between coarse columnar dendrites and finer equiaxed dendrites. The results are compared with those previously obtained in lead-tin alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. F.M. Hosking, F. Folgarportillo, R. Wunderlin, R. Mehrabian: J. Mater. Sci., 1982, vol. 17, pp. 477–9810.1007/BF00591483 ↗
2. C.S. Lee, Y.H. Kim, K.S. Han, T. Lim: J. Mater. Sci., 1992, vol. 27, pp. 793–80010.1007/BF02403898 ↗
3. E. Gervais, H. Levert, M. Bess: AFS Trans., 1980, vol. 88, pp. 183–94
4. M. Sahoo, L.V. Whiting: AFS Trans., 1984, vol. 92, pp. 861–70
5. M. Sahoo, L.V. Whiting, W.G. Whited: AFS Trans., 1985, vol. 93, pp. 475–80
6. M. Sahoo, L.V. Whiting, G. Chartrand: Weatherall. AFS Trans., 1986, vol. 94, pp. 225–42.
7. D. Delneuville: Wear, 1985, vol. 105, pp. 283–9210.1016/0043-1648(85)90227-3 ↗
8. R. Auras, C. Schvezov: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1579–9010.1007/s11661-004-0264-8 ↗
9. H. Biloni, B. Chalmers: Trans. AIME, 1968, vol. 233, p. 373
10. S.C. Flood, J.D. Hunt: ASM Handbook, ASM, Materials Park, OH, 1998, vol. 15, pp. 130–36
11. R.B. Mahapatra, F.B. Weinberg: Metall. Trans., 1987, vol. 3 (2), pp. 425–3210.1007/BF02656163 ↗
12. S.E. Kisakurek: J. Mater. Sci., 1984, vol. 19, pp. 2289–30510.1007/BF01058106 ↗
13. H. Fredriksson, M. Hillert: Mater. Sci. Technol., 1986, vol. 2, pp. 508–1410.1179/mst.1986.2.5.508 ↗
14. I. Ziv, F. Weinberg: Metall. Trans. B, 1989, vol. 20B, pp. 731–3410.1007/BF02655931 ↗
15. S. Kim, R.N. Grugel: Metall. Trans. A, 1992, vol. 23A, pp. 1807–1510.1007/BF02804373 ↗
16. W.J. Pool, F. Weinberg: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 855–6110.1007/s11661-998-0276-x ↗
17. M.A. Martorano, J.D.T. Capocchi: Int. J. Cast. Met. Res., 2000, vol. 13, pp. 49–5710.1080/13640461.2000.11819387 ↗
18. A.E. Ares, C.E. Schvezov: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1611–2510.1007/s11661-000-0171-6 ↗
19. Ch.A. Gandin: Acta Mater., 2000, vol. 48, pp. 2483–250110.1016/S1359-6454(00)00070-7 ↗
20. Ch.A. Gandin: Iron Steel Inst. Jpn., 2000, vol. 40, pp. 971–7910.2355/isijinternational.40.971 ↗
21. C.A. Siqueira, N. Cheung, A. Garcia: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2107–1810.1007/s11661-002-0042-4 ↗
22. A.E. Ares, S.F. Gueijman, R. Caram, C.E. Schvezov: J. Cryst. Growth, 2005, vol. 275 (1–2), p. 319–2710.1016/j.jcrysgro.2004.10.115 ↗
23. V.K. Suri, N. El-Kaddah, J.T. Berry: Trans. AFS, 1991, vol. 99, pp. 187–91
24. M. Vandyoussefi, A.L. Greer: Acta Mater., 2002, vol. 50, pp. 1693–170510.1016/S1359-6454(02)00015-0 ↗
25. N. Mangelick-Noel, H. Nguyen-Thi, G. Reinhart, T. Schenk, V. Cristiglio, M.-D. Dupouy, J. Gastaldi, B. Billia, J. Härtwi, J. Baruchel: J. Phys. D, 2005, vol. 38, pp. A28–A32.10.1088/0022-3727/38/10A/006 ↗
26. Ch. Gandin, M. Rappaz: Acta Metall. Mater., 1994, vol. 42, pp. 2233–4610.1016/0956-7151(94)90302-6 ↗
27. P. Zhu, R. Smith: Acta Metall. Mater., 1992, vol. 40, pp. 683–9210.1016/0956-7151(92)90009-4 ↗
28. J.A. Spittle, G.R. Brown: J. Mater. Sci., 1989, vol. 23, pp. 1777–8110.1007/BF01105705 ↗
29. I. Dustin and W. Kurz: Z. Metallkd., 1986, pp. 265–7310.1515/ijmr-1986-770501 ↗
30. M. Rappaz, Ph. Thevoz: Acta Metall., 1987, vol. 35 (7), pp. 1487–9710.1016/0001-6160(87)90094-0 ↗
31. M. Rappaz, Ph. Thevoz: Acta Metall., 1987, vol. 35 (7), pp. 1487–9710.1016/0001-6160(87)90094-0 ↗
32. Ph. Thevoz, J.L. Desbiolles, M. Rappaz: Metall. Trans. A, 1989, vol. 20A, pp. 31–22
33. P. Zhu, R.W. Smith: Acta Metall. Mater., 1992, vol. 40, pp. 3369–7910.1016/0956-7151(92)90050-O ↗
34. J.D. Hunt: Mater. Sci. Eng., 1984, vol. 65, pp. 75–8310.1016/0025-5416(84)90201-5 ↗
35. J.D. Hunt and S.C. Flood: Model. Weld. Cast. II, 1983, pp. 207–13
36. J.D. Hunt and S.C. Flood: Model. Weld. Cast. Processes, 1986, pp. 607–10
37. M. Gäuman, C. Bezençon, P. Canalis, W. Kurz: Acta Mater., vol. 49, pp. 1501–62
38. W. Kurz, C. Bezençon, M. Gäuman: Sci. Technol. Adv. Mater., 2001, vol. 2, pp. 185–9110.1016/S1468-6996(01)00047-X ↗
39. C.Y. Wang and C. Beckermann: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1081–9310.1007/BF02652282 ↗
40. C.Y. Wang, C. Beckermann: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2754–6410.1007/BF02652369 ↗
41. C.Y. Wang, C. Beckermann: Metall. Trans. A, 1996, vol. 27A, pp. 2765–83.10.1007/BF02652370 ↗
42. C.Y. Wang, C. Beckermann: Metall. Trans. A, 1996, vol. 27A, pp. 2784–95.
43. C.Y. Wang, C. Beckermann: Miner., Met. Mater. Soc., 1997, vol. 49 (3), pp. 13–17.10.1007/BF02914649 ↗
44. J. Lipton, M.E. Glicksman, W. Kurz: Mater. Sci. Eng., 1984, vol. 65, pp. 57–6310.1016/0025-5416(84)90199-X ↗
45. A.E. Ares, S.F. Gueijman, C.E. Schvezov: J. Cryst. Growth, 2002, vol. 241, pp. 235–4010.1016/S0022-0248(02)01136-3 ↗
46. S. Liu, S. Lu, A. Hellawell: J. Cryst. Growth, 2002, vol. 234, pp. 740–5010.1016/S0022-0248(01)01680-3 ↗
47. M.A. Martorano, C. Beckermann, C.A. Gandin: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1657–7210.1007/s11661-003-0311-x ↗
48. G. Kehl: Fundamentos de la Práctica Metalográfica, Aguilar, Madrid, 1963, pp. 58–63
49. Metals Handbook, H.E. Boyer and T.L. Gall (eds.), Desk Edition, ASM, Metals Park Ohio, 1985, pp. 1-48, 1-51, 11-1–11-6, 2-19, 2-14, 35-18–35-19
50. Metals Handbook, T. Lyman (ed.), Eight Edition, Vol. 8, ASM, Metals Park Ohio, 1973, pp. 141–42, 264
51. Ch. A. Gandin and M. Rappaz: Acta Metall. Mater., 1994, vol. 42, pp. 2223–4610.1016/0956-7151(94)90302-6 ↗
52. G.T. Lowe: Master’s Thesis, University of British Columbia, Vancouver, BC, Canada, 1990, pp. 25–62
53. H. Biloni: Relación Entre Las Subestructuras de Segregación y Las Estructuras de Fundición, Departamento de Metalurgia, Comisión Nacional de Energía Atómica, Buenos Aires, Argentina, PMM/R-66, 1971, pp. 36–40
54. B. Kisakurek: J. Mater. Sci., 1984, vol. 19, pp. 2289–30510.1007/BF01058106 ↗
55. B.S. Bokshtein: Difusión en Metales, Mir, URSS, 1980, pp. 37–38
56. W.R. Osório, A. Garcia: Mater. Sci. Eng. A, 2002, vol. 325, pp. 103–1110.1016/S0921-5093(01)01455-1 ↗