Effect of microstructure on mechanical properties of as-cast Mg-Al alloys
Source abstract
Abstract
The mechanical properties of Mg-Al alloys are mainly determined by the microstructure, i.e., the amount and morphology of the phases, but also by the presence of defects arising from the melt handling and casting process. In order to obtain information about the isolated effect of the microstructure, it is, therefore, necessary to minimize the amounts of defects. In this study, this has been achieved by remelting and solidifying the alloys in a gradient furnace. The drawing rate was varied from 0.3 to 6 mm/s, which yielded a wide variety of microstructures. Three samples were produced for each parameter set, in order to have a statistical basis for the evaluation. The results showed that homogeneous and reproducible samples could be produced, and that the tensile properties obtained showed a very small scatter. The effects of microstructural parameters such as grain size, secondary dendrite arm spacing (SDAS), eutectic fraction, and eutectic morphology on the yield strength, ultimate tensile strength (UTS), fracture elongation, and hardness has been investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. H. Sasaki, M. Adachi, and T. Sakamoto: IMA 53. Magnesium—a Material Advancing to the 21st Century, Ube City, Yamaguchi, Japan, IMA (USA), 1996, pp. 86–92.
2. Z. Zhang, A. Couture, R. Tremblay, and D. Dube: Light Metals, (Canada), 1999, pp. 397–406.
3. C.H. Caceres and D.M. Rovera: J. Light Met., 2001, vol. 1, pp. 151–56.10.1016/S1471-5317(01)00008-6 ↗
4. M.S. Misra and K.J. Oswalt: Transactions of the American Foundrymen’s Society, Vol. 83, Des Plaines, III, 1975, pp. 299–306.
5. A.K. Dahle, S. Sannes, D.H. St. John, and H. Westengen: J. Light Met., 2001, vol. 1, pp. 99–103.10.1016/S1471-5317(01)00002-5 ↗
6. S. Sannes and H. Westengen: Conf. on Magnesium Alloys and Their Applications, Wolfsburg, Germany, 1998, pp. 223–28.
7. J. Bäckman: Licenciate Thesis, Jönköping University, Jönköping, 1999.
8. H. Fredriksson and U. Äkerlind: Compendium of Casting Processing, The Royal Institute of Technology (KTH), Stockholm, 2001.
9. M.D. Nave, A.K. Dahle, and D.H. St. John: Conf. on Magnesium Technology 2000, TMS/AIME, Warrendale, USA, 2000, pp. 233–42.10.1002/9781118808962.ch33 ↗
10. M.D. Nave, A.K. Dahle, and D.H. St. John: Conf. on Magnesium Technology 2000, TMS/AIME, Warrendale, USA, 2000, pp. 243–50.10.1002/9781118808962.ch34 ↗
11. M.D. Nave, A.K. Dahle, and D.H. St. John: Int. J. Cast Met. Res., 2000, vol. 13, pp. 1–7.10.1080/13640461.2000.11819383 ↗
12. B. Sundman, B. Jansson, and J.O. Andersson: CALPHAD, 1985, vol. 9, pp. 153–90.10.1016/0364-5916(85)90021-5 ↗
13. N. Saunders: “Mg-DATA, a Database for Thermodynamic Calculations of Mg-Alloys,” Thermotech Ltd., Guilford, United Kingdom.
14. R.E. Smallman and R.J. Bishop: Metals and Materials: Science, Processes and Application, Butterworth-Heinemann Ltd., Oxford, UK, 1995, pp. 228–29.
15. A.F. Crawley and B. Lagoweki: Metall. Trans., 1974, vol. 5, pp. 949–51.10.1007/BF02643153 ↗
16. E. Blank, M. Kaspar, and M. Rappaz: Proc. Strength of Metals and Alloys Vol. 1, Montreal, Canada, Pergamon Press Ltd., Oxford, UK, 1985, pp. 87–92.
17. L.M. Brown and W.M. Stobbs: Phil. Mag., 1971, vol. 23, pp. 1185–99.10.1080/14786437108217405 ↗
18. L.M. Brown and D.R. Clarke: Acta Metall., 1975, vol. 23, pp. 821–30.10.1016/0001-6160(75)90198-4 ↗
19. D. Tabor: Proc. R. Soc, 1948, vol. 192, pp. 247–74.
20. C.L. Bancroft, C.H. Caceres, and J.R. Griffiths: Magnesium Technology 2000, 2000 TMS Annual Meeting, Nashville, TN, 2000, pp. 291–94.10.1002/9781118808962.ch40 ↗
21. Akhtar and E. Teghtsoonian: Acta Metall., 1969, vol. 17, pp. 1351–56.10.1016/0001-6160(69)90152-7 ↗
22. B. Lagowski and J.W. Meier: AFS Trans., 1968, vol. 76, pp. 133–41.