journal article·2007-10Open access

Transmission Electron Microscopy Characterization of the Bake-Hardening Behavior of Transformation-Induced Plasticity and Dual-Phase Steels

I.B. Timokhina, P.D. Hodgson, E.V. Pereloma

Abstract

The effect of prestraining (PS) and bake hardening (BH) on the microstructures and mechanical properties has been studied in transformation-induced plasticity (TRIP) and dual-phase (DP) steels after intercritical annealing. The DP steel showed an increase in the yield strength and the appearance of the upper and lower yield points after a single BH treatment as compared with the as-received condition, whereas the mechanical properties of the TRIP steel remained unchanged. This difference appears to be because of the formation of plastic deformation zones with high dislocation density around the “as-quenched” martensite in the DP steel, which allowed carbon to pin these dislocations, which, in turn, increased the yield strength. It was found for both steels that the BH behavior depends on the dislocation rearrangement in ferrite with the formation of cell, microbands, and shear band structures after PS. The strain-induced transformation of retained austenite to martensite in the TRIP steel contributes to the formation of a complex dislocation structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Y. Sakuma, O. Matsumura, H. Takechi: Metall. Trans. A, 1991, vol. 22A, pp. 489–9810.1007/BF02656816 ↗
2. R.G. Davies: Metall. Trans. A, 1978, vol. 9A, pp. 41–5210.1007/BF02647169 ↗
3. A.H. Nakagawa, G. Thomas: Metall. Trans. A, 1985, vol. 16A, pp. 831–4010.1007/BF02814834 ↗
4. O. Matsumura, Y. Sakuma, H. Takechi: Trans. ISIJ, 1987, vol. 27, pp. 570–7910.2355/isijinternational1966.27.570 ↗
5. M.S. Rashid: Proc. AIME Symp., TMS-AIME, Warrendale, PA, 1994, vol. 244, pp. 1–24
6. O. Matsumura, Y. Sakuma, H. Takechi: Scripta Metall., 1987, vol. 21, pp. 1301–0610.1016/0036-9748(87)90103-7 ↗
7. G.R. Speich, V.A. Demarest: Metall. Trans. A, 1981, vol. 12A, pp. 1419–2810.1007/BF02643686 ↗
8. V.F. Zackay, E.R. Parker, D. Fahr, R. Bush: Trans. ASM, 1967, vol. 60, pp. 252–59
9. L.J. Baker, S.R. Daniel, J.D. Parker: Mater. Sci. Technol., 2002, vol. 18, pp. 355–6810.1179/026708302225002452 ↗
10. A.H. Cottrell, B.A. Bilby: Proc. Phys. Soc., 1949, vol. A62, pp. 49–6210.1088/0370-1298/62/1/308 ↗
11. T. Senuma: ISIJ Int., 2001, vol. 41, pp. 520–3210.2355/isijinternational.41.520 ↗
12. O.M. Faral and T. Hourman: Proc. 41st MWSP Conf., ISS, Baltimore, MD, 1999, vol. XXXVII, pp. 253–64
13. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–30310.1016/j.cossms.2004.10.002 ↗
14. M. Kinoshita, A. Nishimoto: CAMP-ISIJ, 1990, vol. 3, pp. 1780–85
15. T. Furukawa, H. Mrikawa, M. Endo, H. Takechi, K. Koyama, O. Akisue, T. Yamada: Trans. ISIJ, 1981, vol. 21, pp. 812–1810.2355/isijinternational1966.21.812 ↗
16. T. Waterschoot, A.K. De, S. Vandeputte, B.C. De Cooman: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 781–9110.1007/s11661-003-1006-z ↗
17. T. Huper, S. Endo, N. Ishikawa, K. Osawa: ISIJ Int., 1999, vol. 39, pp. 288–9410.2355/isijinternational.39.288 ↗
18. A.K. De, S. Vandeputte, B.C. De Cooman: Scripta Mater., 2001, vol. 44, pp. 695–70010.1016/S1359-6462(00)00638-2 ↗
19. D. Kalish, M. Cohen: Mater. Sci. Eng., 1970, vol. 6, pp. 156–6610.1016/0025-5416(70)90045-5 ↗
20. A.K. De, K. De Blauwe, S. Vandeputte, B.C. De Cooman: J. Alloys Compd., 2000, vol. 310, pp. 405–1010.1016/S0925-8388(00)00973-7 ↗
21. G.E. Dieter: Mechanical Metallurgy, 2nd ed., McGraw-Hill, New York, NY, 2001, p. 287
22. B.D. Cullity: Elements of X-Ray Diffraction, Addison-Wesley, London, 1978, pp. 411–15
23. M. Onink, C.M. Brakman, F.D. Tichelaar, E.J. Mittemeijer, S. van der Zwaag, J.H. Root, N.B. Konyer: Scripta Metall. Mater., 1993, vol. 29, pp. 1011–1610.1016/0956-716X(93)90169-S ↗
24. P.B. Hirsch, R.B. Nicholson, A. Howie, D.W. Pashley, M.J. Whelan: Electron Microscopy of Thin Crystals, Butterworth and Co., London, 1965, pp. 51–54
25. K. Sakata, S. Satoh, T. Kato, and O. Hashimoto: ISIJ Int., 1994, pp. 279–88
26. A.K. De, S. Vandeputte, B.C. De Cooman: Scripta Mater., 1999, vol. 41, pp. 831–3710.1016/S1359-6462(99)00232-8 ↗
27. A.K. De, K. De Blauwe, S. Vandeputte, B.C. De Cooman: J. Alloys Compd., 2000, vol. 310, pp. 405–1010.1016/S0925-8388(00)00973-7 ↗