journal article·2000-01

Prediction of cracks in continuously cast steel beam blank through fully coupled analysis of fluid flow, heat transfer, and deformation behavior of a solidifying shell

Jung-Eui Lee, Tae-Jung Yeo, Kyu Hwan OH, Jong-Kyu Yoon, U-Sok Yoon

Publisher page

Abstract

A mathematical model has been developed for the prediction of cracks in the continuously cast steel beam blank through the fully coupled analysis of fluid flow, heat transfer, and deformation behavior of a solidifying shell. Fluid flow and heat transfer in the strand mold were analyzed with a three-dimensional (3-D) finite-volume method (FVM). For the complex geometry of the beam blank, a body-fitted coordinate (BFC) system was employed. Thermo-elastic-plastic deformation behavior in the strand was analyzed using the finite-element method (FEM) based on the two-dimensional (2-D) slice model. The thermal fields of the strand calculated with the FVM were used in the analysis of the deformation behavior of the strand. Through the iterative analysis of the fluid flow, heat-transfer, and deformation behavior, the coupling parameter of the heat-transfer coefficient between the strand and the mold was obtained. In order to describe the thermophysical properties and thermomechanical behavior of steel in the mushy zone, the microsegregation of solute elements was assessed. Consequently, some characteristic temperatures of steel as well as variations of phase fractions with temperature were determined. The probability of cracking in the strand, originating from an interdendritic liquid film, was quantified as a crack susceptibility coefficient. Recirculating flows were developed in the web and flange-tip regions. The development of a solidifying shell in the flange-center region was retarded by the inlet flow from a submerged entry nozzle (SEN). An air gap was formed mainly near the flange-tip corner. Surface cracks in the web and fillet regions and internal cracks in the flange-tip region were predicted.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Y. Sahai, J.E. Battles, R.S. Carbonara, and C.E. Mobley: Proc. Int. Symp. on Casting of Near Net Shape Products, Honolulu, HI, Nov. 1988, TMS, Warrendale, PA.
2. K.-A. Zimmermann: Proc. 2nd Eur. Continuous Casting Conf. & 6th Int. Rolling Conf., German Iron and Steel Institute, Dusseldorf, 1994, pp. 329–468.
3. M. Onish, T. Ueda, H. Mizota, M. Yao, Y. Shinjo, and T. Fujimura: Kawasaki Steel Tech. Rep., 1981, Sept., No. 3, pp. 13–25.
4. H. Omori, T. Ueda, H. Mizota, M. Yao, Y. Shinjo, and T. Fujimura: Testu-to-Hagane, 1981, vol. 67, pp. 1321–30.
5. J.T. Choi: Ph.D. Thesis, Seoul National University, Seoul, 1996
6. J.K. Brimacombe and I.V. Samarasekera: I&SM, 1994, Nov., pp. 29–39.
7. J.E. Kelly, K.P. Michalek, T.G. O’Connor, B.G. Thomas, and J.A. Dantzig: Metall. Trans. A, 1988, vol. 19A, pp. 2589–2602.10.1007/BF02645486 ↗
8. M.R. Aboutalebi, M. Hasan, and R.I.L. Guthrie: Metall. Mater. Trans. B, 1995, vol. 26B, pp. 731–44.10.1007/BF02651719 ↗
9. S.I. Chung and J.K. Yoon: Ironmaking and Steelmaking, 1996, vol. 23, pp. 425–32.
10. A. Grill, K. Sorimachi, and J.K. Brimacombe: Metall. Trans. B, 1976, vol. 7B, pp. 177–89.10.1007/BF02654916 ↗
11. X. Huang, B.G. Thomas, and F.M. Najjar: Metall. Trans. B, 1992, vol. 23B, pp. 339–56.10.1007/BF02656290 ↗
12. K.C. Karki: Ph.D. Thesis, University of Minnesota, Twin Cities, 1986.
13. M. Peric: Ph.D. Thesis, Imperial College, London, 1985.
14. J.F. Thompson, Z.U.A. Warsi, and C.W. Mastin: Numerical Grid Generation, North-Holland, New York, NY, 1985
15. J.F. Thompson, Z.U.A. Warsi, and C.W. Mastin: J. Comp. Phys., 1982, vol. 47, pp. 1–108.10.1016/0021-9991(82)90066-3 ↗
16. A.W. Cramb and E.S. Szekeres: Mold Operations for Quality and Productivity, ISS-AIME, Warrendale, PA, 1992, pp. 37–82.
17. J.K. Brimacombe, I.V. Samarasekera, and J.E. Lait: Continuous Casting, ISS-AIME, Warrendale, PA, 1984, vol. 2, pp. 29–104.
18. J.E. Late, J.K. Brimacombe, and F. Weinberg: Ironmaking Steelmaking Q., 1974, No. 2, pp. 90–97.
19. B. Lally, L. Biegler, and H. Henein: Metall. Trans. B, 1990, vol. 21B, pp. 761–70.10.1007/BF02654255 ↗
20. J.O. Kristiansson: J. Thermal Stresses, 1984, vol. 7, pp. 209–26.10.1080/01495738408942209 ↗
21. K. Kim, H.N. Han, T. Yeo, Y. Lee, K.H. Oh, and D.N. Lee: Ironmaking and Steelmaking, 1997, vol. 24, pp. 249–56.
22. K. Kim, Y. Lee, H.N. Han, K.H. Oh, and D.N. Lee: Proc. Int. Conf. on Modeling of Casting and Solidification Processes, Hitachi Metals LTD., Japan, 1995, pp. 37–50.
23. T.G. O’Connor and J.A. Dantzig: Metall. Mater. Trans. B, 1994, vol. 25B, pp. 443–57.10.1007/BF02663395 ↗
24. J.-E. Lee, H.N. Han, K.H. Oh, and J.K. Yoon: Iron Steel Inst. Jpn. Int., 1999, vol. 39, pp. 435–44.10.2355/isijinternational.39.435 ↗
25. J.-E. Lee, T.-J. Yeo, H.N. Han, K.H. Oh, and J.K. Yoon: Proc. 4th Int. Colloquium on Process Simulation, Espoo, Finland, June 1997, Helsinki University of Technology, pp. 23–44.
26. K. Kim, T.-J. Yeo, K.H. Oh, and D.N. Lee: Iron Steel Inst. Jpn. Int., 1996, vol. 36, pp. 284–89.10.2355/isijinternational.36.284 ↗
27. Y. Ueshima, S. Mizoguchi, T. Matsumiya, and H. Kajioka: Metall. Trans. B, 1986, vol. 17B, pp. 845–59.10.1007/BF02657148 ↗
28. S. Kobayashi: Iron Steel Inst. Jpn. Int., 1988, vol. 28, pp. 535–42.
29. H.N. Han, J.-L. Lee, T.-J. Yeo, Y.M. Won, K. Kim, K.H. Oh, and J.K. Yoon: Iron Steel Inst. Jpn. Int., 1999, vol. 39, pp. 445–54.10.2355/isijinternational.39.445 ↗
30. J.K. Yoon and J.-E. Lee: Proc. Int. Conf. on Modeling and Simulation in Metallurgical Engineering and Materials Science, The Chinese Society for Metals, Beijing, 1996, pp. 341–50.
31. J.-E. Lee, H.N. Han, and J.K. Yoon: Iron Steel Inst. Jpn. Int., 1998, vol. 38, pp. 132–41.10.2355/isijinternational.38.132 ↗
32. K. Kim: Ph.D. Thesis, Seoul National University, Seoul, 1996
33. H.N. Han, Y. Lee, K.H. Oh, and D.N. Lee: Mater. Sci. Eng. A, 1996, vol. 206, pp. 81–89.10.1016/0921-5093(95)10000-8 ↗
34. D.N. Lee and H.S. Kim: Powder Metall., 1992, vol. 35, pp. 275–79.10.1179/pom.1992.35.4.275 ↗
35. B.G. Thomas: Iron Steel Inst. Jpn., 1995, vol. 35, pp. 737–43.10.2355/isijinternational.35.737 ↗
36. J.S. Park: Kwangwon Industry, Pohang, Korea, private communication, 1995.
37. S.V. Patankar: Numerical Heat Transfer and Fluid Flow, McGraw-Hill, New York, NY, 1980.
38. A.D. Gosman and F.J.K. Ideriah: Manual of a General Computer Program for Two-Dimensional, Turbulent, Recirculating Flows, Imperial College, London, 1983
39. J. Savage and W.H. Prichard: J. Iron Steel Inst. 1954, Nov., pp. 269–77.
40. R. Davies, N. Blake, and P. Campbell: Proc. of 4th Int. Conf. on Continuous Casting, Brussels, May 1988, Verlag Stahleisen, pp. 645–54.
41. T. Matsumiya, M. Ito, H. Kajioka, S. Yamaguchi, and Y. Nakamura: Iron Steel Inst. Jpn. Int., 1986, vol. 26, pp. 540–46.
42. J. Miyazaki, K. Narita, T. Nozaki, and T. Mori: Iron Steel Inst. Jpn. Int., 1981, vol. 21, vol. B210.
43. W.R. Storkman: Master’s Thesis, University of Illinois, 1986
44. P. Kumar, C.L. Martin, and S. Brown: Proc. 3rd Int. Conf. on Processing of Semi-Solid Alloys and Composite, Tokyo, June 1994, pp. 37–46.
45. M. Hirai, K. Takebayashi, Y. Yoshikawa, M. Furukawa, Y. Fujikawa, and A. Nanba: Abstract Books of International Conference on Semi-Solid Processing of Alloys and Composites, Sophia-Antipolis, France, April 1990, pp. 1–3.
46. P.J. Wray: Proc. Modeling of Casting, Welding Process, H.D. Brody and D. Apelian, eds., TMS-AIME, Warrendale, PA, 1980, pp. 245–57.