journal article·2012-01

Al-to-Cu Friction Stir Lap Welding

Vahid Firouzdor, Sindo Kou

Publisher page

Abstract

Recently, friction stir welding (FSW) has been used frequently to join dissimilar metals, for instance, Al to Mg, Cu, and steel. The formation of brittle intermetallic compounds often severely limits the strength and ductility of the resultant welds. In the present study, Al-to-Cu lap FSW was studied by welding 6061 Al to commercially pure Cu. Conventional lap FSW was modified by butt welding a small piece of Al to the top of Cu, with a slight pin penetration into the bottom of Al. At travel speeds up to 127 mm/min (5 ipm), the modified welds were about twice the joint strength and five to nine times the ductility of the conventional lap welds. In the conventional lap welds, voids were present along the Al–Cu interface, and fracture occurred along the interface in tensile testing. No such voids were observed in the modified lap welds, and fracture occurred through Cu. Thus, as in the case of Al-to-Mg lap FSW recently studied by the authors, modified lap FSW significantly improved the weld quality in Al-to-Cu lap FSW. At the relatively high travel speed of 203 mm/min (8 ipm), however, modified lap FSW was no longer superior because of channel formation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. C. Conrardy: 8th Int. Conf. on Trends in Welding Research, Pine Mountain, GA, 2008.
2. K. Nakada and M. Ushio: J. Jpn. Weld. Soc., 2002. vol. 71, no. 6, pp. 6-9,
3. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Tem-Plesmith, and C.J. Dawes: Patent Application No. 9125978.8, 1991.
4. H. Okamura and K. Aota: National Conf. of the Japan Welding Society, 2002.
5. A. Elrefaey, M. Takahashi, and K. Ikeuchi: Welding in the World, 2005, vol. 49, nos. 3–4, pp. 93-101.10.1007/BF03266481 ↗
6. A. Elrefaey, M. Takahashi, and K. Ikeuchi: J. High Temp. Soc., 2004, vol. 30, no. 5, pp. 286-92.10.7791/jhts.30.286 ↗
7. A. Abdollah-Zadeh, T. Saeid, and B. Sazgari: Weldability and Mechanical Properties of Dissimilar Aluminum-Copper Lap Joints Made by Friction Stir Welding, Welding in South-East Asia: A Challenge for the Future, International Welding Institute, Bangkok, Thailand, 2006.
8. A. Abdollah-Zadeh, T. Saeid, and B. Sazgari: J. Alloys Compd., 2008, vol. 460, pp. 535-38.10.1016/j.jallcom.2007.06.009 ↗
9. P. Liu, Q. Shi, W. Wang, X. Wang, and Z. Zhang: Mater. Lett., 2008, vol. 62, pp. 4106-08.10.1016/j.matlet.2008.06.004 ↗
10. X. Wang, Z. Zhang, C. Da, and J. Li: China Welding, 2007, vol. 16, no. 1, pp. 57-62.
11. K. Savolainen, J. Mononen, T. Saukkonen, and H. Hanninen, 6th Int. Symp. on Friction Stir Welding, Saint-Sauveur, Canada, 2006, pp. 1–10.
12. J. Ouyang, E. Yarrapareddy, and R. Kovacevic: J. Mater. Process. Tech., 2006, vol. 172, pp. 110-22.10.1016/j.jmatprotec.2005.09.013 ↗
13. W.-B. Lee and S.-B. Jung: Mater. Res. Innovat., 2004, vol. 8, no. 2, pp. 93-96.10.1080/14328917.2004.11784837 ↗
14. A. Pietras: Welding in the World, 2005, vol. 49, no. 9, pp. 122-33.
15. G. Luan, C. Sun, H. Guo, and Y. Yu: 4th Int. Symp. on Friction Stir Welding, Park City, UT, 2003, pp. 1–11.
16. L. Karlsson, E.-L. Berqvist, and H. Larsson: Welding in the World, 2002, vol. 46, nos. 1,2, pp. 10–14.10.1007/BF03266360 ↗
17. R.D. Flores, L.E. Murr, and E.A. Trillo: Electron Microsc., 1998, vol. 11, pp. 143-44.
18. L.E. Murr, E.A. Trillo, Y. Li, R.D. Flores, B.M. Nowak, and J.C. McClure: Fluid Flow Phenomena in Materials Processing, Eds., N. El-Kaddah, D.G.C. Robertson, S.T. Johansen, and V.R. Voller, TMS, Warrendale, PA, 1999, pp. 31–40.
19. American Society for Metals: Binary Alloy Phase Diagrams vol. 1, American Society for Metals, Metals Park, OH, 1986, p. 106.
20. Y.G. Kim, H. Fujii, T. Tsumura, T. Komazaki, and K. Nakada: Mater. Sci. Eng. A, 2006, vol. 415, pp. 250-54.10.1016/j.msea.2005.09.072 ↗
21. V. Firouzdor and S. Kou: Weld. J., 2009, vol. 88, pp. 213s–224s.
22. V. Firouzdor and S. Kou: U.S. Patent Application No. 20110104515, 2009.
23. V. Firouzdor and S. Kou: Metall. Mater. Trans. A, 2010, vol. 41A, no. 11, pp. 2914-35.10.1007/s11661-010-0340-1 ↗
24. V. Firouzdor and S. Kou: Metall. Mater. Trans. A, 2010, vol. 41A, no. 12, pp. 3238-51.10.1007/s11661-010-0366-4 ↗