Mechanisms of creep deformation in Mg-Sc-based alloys
Source abstract
Abstract
Binary Mg-Sc alloys show only a very weak age-hardening response due to the low diffusivity of Sc in Mg and exhibit inferior creep resistance compared to WE alloys. The addition of a small amount of Mn (<1.5 wt pct) improves their creep behavior markedly, decreasing the minimum creep rates by up to about two orders of magnitude at temperatures above 300 °C compared to WE alloys. This is due to the precipitation of fine Mn2Sc phase basal discs, which are very effective obstacles in controlling creep at temperatures at which cross-slip of basal dislocations and nonbasal slip are the rate controlling mechanisms. The addition of Ce improves the creep resistance even more due to the effect of the grain boundary eutectic. The effect of Mn2Sc discs can still be seen in alloys with a low Sc content (∼1 wt pct) and with the addition of rare earth (RE) elements (Gd, Y, Ce ∼4 wt pct). Very thin hexagonal plates containing RE and Mn, which lie parallel to the basal plane of the Mg matrix, augment the effect of the Mn2Sc precipitates at elevated temperatures (∼250 °C). The triangular arrangement of prismatic plates of metastable or stable phases of Mg-RE systems controls effectively the motion of basal dislocations during the creep of these alloys at elevated or high temperatures. The combined control of basal slip, cross-slip of basal dislocations, and of nonbasal slip in low Sc content alloys ensures minimum creep rates of about one order of magnitude lower than those observed in WE alloys, both at elevated and high temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. G.W. Lorimer: Proc. London Conf. on Magnesium Technology, H. Baker, ed., Institute of Metals, London, 1986, pp. 47–53.
2. I.J. Polmear: Mater. Sci. Technol., 1994, vol. 10, pp. 1–16.10.1179/mst.1994.10.1.1 ↗
3. T.B. Massalski: Binary Alloy Phase Diagrams, 2nd ed., ASM, Materials Park, OH, 1990, vol. 4, pp. 2545–6.
4. P. Vostrý, I. Stulíková, B. Smola, F. von Buch, and B.L. Mordike: in Magnesium Alloys and Their Applications, B.L. Mordike and K.U. Kainer, eds., Werkstoff-Informationsgeselschaft, Frankfurt, 1998, pp. 333–38.
5. B.L. Mordike and F. von Buch: Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-VCH Verlag, Weinheim, 2000, pp. 35–40.10.1002/3527607552.ch6 ↗
6. B.L. Mordike: Mater. Sci. Eng. A, 2002, vol. 324, pp. 103–12.10.1016/S0921-5093(01)01290-4 ↗
7. B.L. Mordike and I. Stulíková: Proc. Int. Conf. Metallic Light Alloys, Institution of Metallurgists, London, 1983, pp. 146–53.
8. W. Henning and B.L. Mordike: Proc. ICSMA 7, Montreal, 1985, pp. 803–08.10.1016/B978-0-08-031642-0.50140-9 ↗
9. F. von Buch: Ph.D. Thesis, TU-Clausthal, Clausthal-Zellerfeld, 1999.
10. F. von Buch, J. Lietzau, B.L. Mordike, A. Pisch, and R. Schmid-Fetzer: Mater. Sci. Eng. A, 1999, vol. 263, pp. 1–7.10.1016/S0921-5093(98)01040-5 ↗
11. B. Smola, I. Stulíková, J. Pelcová, F. von Buch, and B.L. Mordike: Phys. Status. Solidi. (A), 2002, vol. 191, pp. 305–16.10.1002/1521-396X(200205)191:1<305::AID-PSSA305>3.0.CO;2-2 ↗
12. I. Stulíková, B. Smola, J. Pelcová, F. von Buch, and B.L. Mordike: Magnesium 2000, A. Aghion and E. Eliezer, eds., MRI, Beer Sheva, 2000, pp. 218–25.
13. Magnesium Elektron Ltd., Manchester, United Kingdom, 1993.
14. I. Stulíková, B. Smola, F. von Buch, and B.L. Mordike: Mat.-Wiss. Werkstofftech., 2001, vol. 32, pp. 20–24.10.1002/1521-4052(200101)32:1<20::AID-MAWE20>3.0.CO;2-C ↗
15. B. Smola, I. Stulíková, J. Pelcová, F. von Buch, and B.L. Mordike: Z. Metallkd., 2003, vol. 94, pp. 553–58.10.3139/146.030553 ↗
16. J.F. Nie: Scripta Mater., 2003, vol. 48, pp. 1009–15.10.1016/S1359-6462(02)00497-9 ↗
17. B. Smola, I. Stulíková, F. von Buch, and B.L. Mordike: Mater. Sci. Eng. A, 2002, vol. 324, pp. 113–17.10.1016/S0921-5093(01)01291-6 ↗