Factors Affecting the Inclusion Potency for Acicular Ferrite Nucleation in High-Strength Steel Welds
Source abstract
Abstract
Factors affecting the inclusion potency for acicular ferrite nucleation in high-strength weld metals were investigated and the contribution of each factor was qualitatively evaluated. Two kinds of weld metals with different hardenabilities were prepared, in both, MnTi2O4-rich spinel formed as the predominant inclusion phase. To evaluate the factors determining the inclusion potency, the inclusion characteristics of size, phase distribution in the multiphase inclusion, orientation relationship with ferrite, and Mn distribution near the inclusion were analyzed. Three factors affecting the ferrite nucleation potency of inclusions were evaluated: the Baker–Nutting (B–N) orientation relationship between ferrite and the inclusion; the formation of an Mn-depleted zone (MDZ) near the inclusion; and the strain energy around the inclusion. Among these, the first two factors were found to be the most important. In addition, it was concluded that the increased chemical driving force brought about by the formation of an MDZ contributed more to the formation of acicular ferrite in higher-strength weld metals, because the B–N orientation relationship between ferrite and the inclusion was less likely to form as the transformation temperature decreased.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. [1] H.-J. Yi, Y.-J. Lee, J.-Y. Kim and S.-S. Kang: J. Mech. Sci. Technol., 2011, vol. 25, pp. 2185-93.10.1007/s12206-011-0529-2 ↗
2. [2] J.R. Yang, C.Y. Huang, C.F. Huang and J.N. Aoh: J. Mater. Sci. Lett., 1993, vol. 12, pp. 1290-93.10.1007/BF00506341 ↗
3. [3] T. Koseki and G. Thewlis: Mater. Sci. Technol., 2005, vol. 21, pp. 867-79.10.1179/174328405X51703 ↗
4. [4] D.S. Sarma, A.V. Karasev and P.G. Jönsson: ISIJ Int., 2009, vol. 49, pp. 1063-74.10.2355/isijinternational.49.1063 ↗
5. [5] D.P. Fairchild, M.L. Macia, N.V. Bangaru and J.Y. Koo: Int. J. Offshore Polar Eng., 2004, vol. 14, pp. 18-28.
6. [6] P.T. Oldland, C.W. Ramsay, D.K. Matlock and D.L. Olson: Weld. J., 1989, vol. 68, pp. 158s-68s.
7. [7] G. Thewlis: Sci. Technol. Weld. Joi., 2000, vol. 5, pp. 365-77.10.1179/136217100101538434 ↗
8. [8] I. Madariaga and I. Gutiérrez: Acta Mater., 1999, vol. 47, pp. 951-60.10.1016/S1359-6454(98)00388-7 ↗
9. [9] J.-Y. Cho, D.-W. Suh, J.-H Kang and H.-C. Lee: ISIJ Int., 2002, vol. 42, pp. 1321-23.10.2355/isijinternational.42.1321 ↗
10. [10] H.-H. Jin, J.-H. Shim, Y.W. Cho and H.-C. Lee: ISIJ Int., 2003, vol. 43, pp. 1111-13.10.2355/isijinternational.43.1111 ↗
11. [11] T. Yamada, H. Terasaki and Y. Komizo: ISIJ Int., 2009, vol. 49, pp. 1059-62.10.2355/isijinternational.49.1059 ↗
12. [12] Y. Okazaki, H. Ishida, K. Suenaga and T. Hidaka: Weld. Int., 2012, vol. 26, pp. 593-600.10.1080/09507116.2011.592687 ↗
13. [13] H. Nako, H. Hatano, Y. Okazaki, K. Yamashita and M. Otsu: ISIJ Int., 2014, vol. 54, pp. 1690-96.10.2355/isijinternational.54.1690 ↗
14. [14] A. Takada, Y.-I. Komizo, H. Terasaki, T. Yokota, K. Oi and K. Yasuda: Weld. Int., 2015, vol. 29, pp. 254-61.10.1080/09507116.2014.921042 ↗
15. [15] J.-H. Shim, Y.W. Cho, S.H. Chung, J.-D. Shim and D.N. Lee: Acta Mater., 1999, vol. 47, pp. 2751-60.10.1016/S1359-6454(99)00114-7 ↗
16. [16] J.-H. Shim, J.-S. Byun, Y.W. Cho, Y.-J. Oh, J.-D. Shim and D.N. Lee: Scripta Mater., 2001, vol. 44, pp. 49-54.10.1016/S1359-6462(00)00560-1 ↗
17. [17] J.-H. Shim, Y.-J. Oh, J.-Y. Suh, Y.W. Cho, J.-D. Shim, J.-S. Byun and D.N. Lee: Acta Mater., 2001, vol. 49, pp. 2115-22.10.1016/S1359-6454(01)00134-3 ↗
18. [18] J.-S. Byun, J.-H. Shim, Y.W. Cho and D.N. Lee: Acta Mater., 2003, vol. 51, pp. 1593-1606.10.1016/S1359-6454(02)00560-8 ↗
19. [19] S. Aihara, G. Shigesato, M. Sugiyama and R. Uemori: Nippon Steel Tech. Rep. No. 91, 2005, pp. 43-48.
20. [20] Y. Kang, J. Jang, J.H. Park and C. Lee: Met. Mater. Int., 2014, vol. 20, pp. 119-27.10.1007/s12540-014-1013-1 ↗
21. [21] Y. Kang, K. Han, J.H. Park and C. Lee: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 4753-57.10.1007/s11661-014-2470-3 ↗
22. [22] Y. Kang, K. Han, J.H. Park and C. Lee: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 3581-91.10.1007/s11661-015-2958-5 ↗
23. [23] C. Blais, G. L’Espérance and G.M. Evans: Sci. Technol. Weld. Joi., 1999, vol. 4, pp. 143-50.10.1179/136217199101537680 ↗
24. [24] A.G. Glover, J.T. McGrath, M.J. Tinkler and G.C. Weatherly: Weld. J., 1977, vol. 56, pp. 267s-73s.
25. [25] R.A. Farrar and Z. Zhang: J. Mater. Sci. Lett., 1993, vol. 12, pp. 1606-11.10.1007/BF00627027 ↗
26. [26] G. Thewlis, J.A. Whiteman and D.J. Senogles: Mater. Sci. Technol., 1997, vol. 13, pp. 257-74.10.1179/mst.1997.13.3.257 ↗
27. [27] R.W. Fonda and G. Spanos: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2145-53.10.1007/s11661-000-0132-0 ↗
28. [28] K. Poorhaydari, B.M. Patchett and D.G. Ivey: Weld. J., 2005, vol. 84, pp. 149s-55s.
29. [29] D.-W. Suh, J.-H. Kang, K.H. Oh and H.-C. Lee: Scripta Mater., 2002, vol. 46, pp. 375-78.10.1016/S1359-6462(01)01254-4 ↗
30. [30] J.-H. Kang, D.-W. Suh, J.-Y. Cho, K.H. Oh and H.-C. Lee: Scripta Mater., 2003, vol. 48, pp. 91-95.10.1016/S1359-6462(02)00352-4 ↗
31. [31] J.-H. Kang and S.-H. Kim: Kor. J. Met. Mater., 2010, vol. 48, pp. 730-40.
32. [32] E. Keehan, L. Karlsson, H.K.D.H. Bhadeshia and M. Thuvander: Mater. Sci. Technol., 2008, vol. 24, pp. 1183-88.10.1179/174328407X226572 ↗
33. [33] E. Keehan, L. Karlsson, H.K.D.H. Bhadeshia and M. Thuvander: Mater. Charact., 2008, vol. 59, pp. 877-82.10.1016/j.matchar.2007.07.011 ↗
34. [34] R.A. Farrar and Z. Zhang: Mater. Sci. Technol., 1995, vol. 11, pp. 759-64.10.1179/mst.1995.11.8.759 ↗
35. [35] H.K.D.H. Bhadeshia: Acta Metall. Mater., 1981, vol. 29, pp. 1117-30.10.1016/0001-6160(81)90063-8 ↗
36. [36] T.-K. Lee, H.J. Kim, B.Y. Kang and S.K. Hwang: ISIJ Int., 2000, vol. 40, pp. 1260-68.10.2355/isijinternational.40.1260 ↗
37. [37] K.-T. Park, S.W. Hwang, J.H. Ji and C.H. Lee: Met. Mater. Int., 2011, vol. 17, pp. 349-56.10.1007/s12540-011-0425-4 ↗
38. [38] R.A. Ricks, P.R. Howell and G.S. Barritte: J. Mater. Sci., 1982, vol. 17, pp. 732-40.10.1007/BF00540369 ↗
39. [39] S. St-Laurent and G. L’Espérance: Mat. Sci. Eng. A-Struct., 1992, vol. 149, pp. 203-16.10.1016/0921-5093(92)90381-A ↗
40. [40] T. Pan, Z. Yang, B. Bai and H. Fang: Acta Metall. Sinica, 2003, vol. 39, pp. 1037-42.
41. [41] C.H. Lee, H.K.D.H. Bhadeshia and H.-C. Lee: Mat. Sci. Eng. A-Struct., 2003, vol. 360, pp. 249-57.10.1016/S0921-5093(03)00477-5 ↗
42. [42] A.R. Tanna and H.H. Joshi: World Academy of Science, Engineering and Technology, 2013, vol. 7, pp. 334-41.
43. [43] N. Wang, Z. Wang and G.C. Weatherly: Metall. Trans. A, 1992, vol. 23A, pp. 1423-30.10.1007/BF02647325 ↗
44. [44] J.S. Seo, K.H. Kim, H.J. Kim and C. Lee: Weld. World, 2013, vol. 57, pp. 65-72.10.1007/s40194-012-0009-z ↗
45. [45] B.L. Bramfitt: Metall. Trans., 1970, vol. 1, pp. 1987-95.10.1007/BF02642799 ↗
46. [46] Ø. Grong, A.O. Kluken, H.K. Nylund, A.L. Dons and J. Hjelen: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 525-34.10.1007/BF02663903 ↗