journal article·2006-06

Carbon paraequilibrium in austenitic stainless steel

G. M. Michal, F. Ernst, A. H. Heuer

Publisher page

Abstract

Carburization of austenitic stainless steels under paraequilibrium conditions—i.e., at (low) temperatures where there is essentially no substitutional diffusion—leads to a family of steels with remarkable properties: enhanced hardness, resulting in improved wear behavior, enhanced fatigue, and corrosion resistance, and with essentially no loss in ductility. These enhanced properties arise from an enormous carbon solubility, which, absent carbide formation, is orders of magnitude greater than the equilibrium solubility. Using interaction parameters from the latest CALPHAD assessment of the Fe-Cr-Ni-carbon system, the authors have calculated the equilibrium and paraequilibrium carbon solubility in a model Fe-18Cr-12 Ni (wt pct) austenitic steel (essentially a model 316L composition), as well as the carbon solubility in this austenite when paraequilibrium carbide formation occurs (i.e., when carbides form in a partitionless manner). For temperatures in the range 725 to 750 K, the calculations predict a paraequilibrium carbon solubility of ∼5.5 at. pct. Carburization of 316L stainless steel at these temperatures, however, results in significantly higher concentrations of carbon in solid solution—up to 12 at. pct. Much better agreement with experimental data is obtained by calculating the paraequilibrium carbon solubility using Wagner interaction parameters, taken from the most comprehensive experimental study of this system. The discrepancy between the two predicted solubilities arises because the CALPHAD Cr-carbon interaction parameters are not sufficiently exothermic at the low temperatures used for paraequilibrium carburization. After multiple paraequilibrium carburization cycles, carbide formation can occur. The carbides that form under these conditions do so in a near-partitionless manner (there is modest Ni rejection to the austenite/carbide interface) and have an unusual stoichiometry: M5C2 (the Hagg or η carbide).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Stainless Steel 2000 Thermochemical Surface Engineering, edited by T. Bell and K. Akamatsu, Maney Publishing, London, 2001.
2. G. Michal, F. Ernst, H. Kahn, Y. Cao, F. Oba, and A.H. Heuer: Acta Mater., in press.
3. B. Weiss and R. Stickler: Metall. Trans, 1972, vol. 3, p. 851.10.1007/BF02647659 ↗
4. Y. Sun, X. Li, and T. Bell: Surf. Eng., 1999, vol. 15, p. 49.10.1179/026708499322911647 ↗
5. K. Aoki, T. Shirahata, M. Tahara, and K. Kitano: in Stainless Steel 2000, edited by T. Bell and K. Akamatsu, Maney Publishing, London, 2001, p. 389.
6. P. Williams: Swagelok Company, private communication.
7. C. Wells and R.F. Mehl: Trans. Metall. Soc., 1940, vol. 140, p. 279.
8. W. Batz, R.F. Mehl, and C. Wells: Trans. Metall. Soc., 1950, vol. 188, p. 553.
9. W.J. Liu, J.K. Brimacombe, and E.B. Hawbolt: Acta Metal. Mater., 1991, vol. 39, p. 2373.10.1016/0956-7151(91)90018-V ↗
10. A. Hultgren: Trans. ASM, 1947, vol. 39, p. 915.
11. M. Hillert: Jernkontorets Ann., 1952, vol. 136, p. 25.
12. Y. Cao, F. Ernst, and G. Michal: Acta Mater., 2003, vol. 51, p. 4171.10.1016/S1359-6454(03)00235-0 ↗
13. F. Ernst, Y. Cao, and G. Michal: Acta Mater., 2004, vol. 52, p. 1469.10.1016/j.actamat.2003.11.027 ↗
14. E.C. Bain and H. Paxton: Alloying Elements in Steel, American Society for Metals, Metals Park, OH, 1961, pp. 125–28.
15. G. Krauss: in Hardenability Concepts with Applications to Steel, edited by D.V. Doane and J.S. Kirkaldy, AIME, Warrendale, PA, 1978, pp. 229–48.
16. M. Cohen: Trans. TMS-AIME, 1962, vol. 224, p. 638.
17. B.J. Lee: CALPHAD, 1992, vol. 16, p. 121.10.1016/0364-5916(92)90002-F ↗
18. N. Yang: Sandia Laboratories, private communication.
19. K. Natesan and T.F. Kassner: Metall. Trans, 1973, vol. 4, p. 2557.10.1007/BF02644258 ↗
20. M. Hillert and C. Qui: Metall. Trans., 1991, vol. 22A, p. 2187.10.1007/BF02664985 ↗
21. L. Kaufman: personal communication.
22. L.S. Darken: in The Physical Chemistry of Metallic Solutions and Intermetallic Compound, Vol. II, Chemical Publishing Co., New York, NY, 1960, p. 80.
23. R.A. Swalin: Thermodynamics of Solids, John Wiley and Sons, New York, NY, 1962, p. 235.