Effect of Friction Stir Processing Procedures on Microstructure and Mechanical Properties of Mg-Al-Zn Casting
Source abstract
Abstract
Cast Mg-Al-Zn (AZ80) alloy was subjected to friction stir processing (FSP) with three different FSP procedures: single pass, single pass with a pre–solution treatment (pre-ST), and two pass. FSP resulted in remarkable grain refinement, significant breakup, and dissolution of the coarse, networklike Mg17Al12 phase. While the single-pass FSP procedure produced a heterogeneous microstructure with Mg17Al12 particle-rich bands, both the pre-ST FSP and the two-pass FSP procedures resulted in the generation of a uniform microstructure. The pre-ST FSP and two-pass FSP samples exhibited significantly enhanced strength and ductility due to remarkable grain refinement and dissolution of coarse Mg17Al12 phase. A post-FSP aging resulted in the precipitation of fine Mg17Al12 particle, thereby increasing the strength of the FSP samples. Among three FSP samples, the aged two-pass FSP sample exhibited the highest ultimate tensile strength (UTS) of 356 MPa and an elongation of 17 pct.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. B.L. Mordike and T. Ebert: Mater. Sci. Eng. A, 2001, vol. 302, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
2. ASM Speciality Handbook, Magnesium and Magnesium Alloys, ASM INTERNATIONAL, Materials Park, OH, 1999, pp. 1–314.
3. C.I. Chang, C.J. Lee, and J.C. Huang: Scripta Mater., 2004, vol. 51, pp. 509–14.10.1016/j.scriptamat.2004.05.043 ↗
4. Y.N. Wang, C.I. Chang, C.J. Lee, H.K. Lin, and J.C. Huang: Scripta Mater., 2006, vol. 55, pp. 637–40.10.1016/j.scriptamat.2006.06.005 ↗
5. F. Khomamizadeh, B. Nami, and S. Khoshkhooei: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3489–94.10.1007/s11661-005-0022-6 ↗
6. S.J. Guo, Q.C. Le, Z.H. Zhao, Z.J. Wang, and J.Z. Cui: Mater. Sci. Eng. A, 2005, vol. 404, pp. 323–29.10.1016/j.msea.2005.05.070 ↗
7. D.H. Stjohn, M. Qian, M.A. Easton, P. Cao, and Z. Hildebrand: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1669–79.10.1007/s11661-005-0030-6 ↗
8. S. Kleiner, O. Beffort, and P.J. Uggowitzer: Scripta Mater., 2004, vol. 51, pp. 405–10.10.1016/j.scriptamat.2004.05.010 ↗
9. Y. Wang, G. Liu, and Z. Fan: Scripta Mater., 2006, vol. 54, pp. 903–08.10.1016/j.scriptamat.2005.10.073 ↗
10. K. Máthis, J. Gubicza, and N.H. Nam: J. Alloys Compd., 2005, vol. 394, pp. 194–99.10.1016/j.jallcom.2004.10.050 ↗
11. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: G.B. Patent Application No. 9125978.8, Dec. 1991.
12. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
13. R.S. Mishra, M.W. Mahoney, S.X. McFadden, N.A. Mara, and A.K. Mukherjee: Scripta Mater., 2000, vol. 42, pp. 163–68.10.1016/S1359-6462(99)00329-2 ↗
14. Z.Y. Ma and R.S. Mishra: Scripta Mater., 2005, vol. 53, pp. 75–80.10.1016/j.scriptamat.2005.03.018 ↗
15. R.S. Mishra, Z.Y. Ma, and I. Charit: Mater. Sci. Eng. A, 2003, vol. 341, pp. 307–10.10.1016/S0921-5093(02)00199-5 ↗
16. Z.Y. Ma, A.L. Pilchak, M.C. Juhas, and J.C. Williams: Scripta Mater., 2008, vol. 58, pp. 361–66.10.1016/j.scriptamat.2007.09.062 ↗
17. Z.Y. Ma: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 642–58.10.1007/s11661-007-9459-0 ↗
18. A.H. Feng and Z.Y. Ma: Scripta Mater., 2007, vol. 56, pp. 397–400.10.1016/j.scriptamat.2006.10.035 ↗
19. F.Y. Hung, C.C. Shih, L.H. Chen, and T.S. Lui: J. Alloys Compd., 2007, vol. 428, pp. 106–14.10.1016/j.jallcom.2006.03.066 ↗
20. C.J. Lee, J.C. Huang, and X.H. Du: Scripta Mater., 2007, vol. 56, pp. 875–78.10.1016/j.scriptamat.2007.01.041 ↗
21. B.M. Darras, M.K. Khraisheh, F.K.A. Farha, and M.A. Omar: J. Mater. Proc. Technol., 2007, vol. 191, pp. 77–81.10.1016/j.jmatprotec.2007.03.045 ↗
22. C.I. Chang, X.H. Du, and J.C. Huang: Scripta Mater., 2007, vol. 57, pp. 209–12.10.1016/j.scriptamat.2007.04.007 ↗
23. W. Woo, H. Choo, D.W. Brown, P.K. Liaw, and Z. Feng: Scripta Mater., 2006, vol. 54, pp. 1859–64.10.1016/j.scriptamat.2006.02.019 ↗
24. P. Cavaliere and P.P. De Marco: J. Mater. Proc. Technol., 2007, vol. 184, pp. 77–83.10.1016/j.jmatprotec.2006.11.005 ↗
25. K.N. Krishnan: Mater. Sci. Eng. A, 2002, vol. A327, pp. 246–51.10.1016/S0921-5093(01)01474-5 ↗
26. J.A. Schneider and A.C. Nunes: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 777–83.10.1007/s11663-004-0018-4 ↗
27. M.A. Sutton, B. Yang, A.P. Reynolds, and R. Taylor: Mater. Sci. Eng. A, 2002, vol. A323, pp. 160–66.10.1016/S0921-5093(01)01358-2 ↗
28. S.W. Xu and X.M. Deng: Acta Mater., 2008, vol. 56, pp. 1326–41.10.1016/j.actamat.2007.11.016 ↗
29. G. Biallas, R. Braun, C.D. Donne, G. Staniek, and W.A. Kaysser: Proc. 1st Int. Symp. on Friction Stir Welding, Thousand Oaks, CA, June 1999.
30. Z.Y. Ma, S.R. Sharma, and R.S. Mishra: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3323–36.10.1007/BF02586167 ↗
31. K. Masaki, Y.S. Sato, M. Maeda, and H. Kokawa: Scripta Mater., 2008, vol. 58, pp. 355–58.10.1016/j.scriptamat.2007.09.056 ↗
32. P. Heurtier, C. Desrayaud, and F. Montheillet: Mater. Sci. Forum, 2002, vols. 396–402, pp. 1537–42.10.4028/www.scientific.net/MSF.396-402.1537 ↗
33. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, University of Lulea, New York, NY, 1981, pp. 1–446.
34. S. Celotto: Acta Mater., 2000, vol. 48, pp. 1775–87.10.1016/S1359-6454(00)00004-5 ↗
35. O. Sitdikov, R. Kaibyshev, and T. Sakai: Mater. Sci. Forum, 2003, vols. 419–422, pp. 521–26.10.4028/www.scientific.net/MSF.419-422.521 ↗
36. J.B. Clark: Acta Metall., 1968, vol. 16, pp. 141–52.10.1016/0001-6160(68)90109-0 ↗
37. Y.Z. Lü, Q.D. Wang, W.J. Ding, X.Q. Zeng, and Y.P. Zhu: Mater. Lett., 2000, vol. 44, pp. 265–68.10.1016/S0167-577X(00)00041-0 ↗