MnS precipitation in association with manganese silicate inclusions in Si/Mn deoxidized steel
Source abstract
Abstract
When manganese silicate inclusions were formed during cooling from 1600 °C, manganese and sulfur contents in the manganese silicate inclusions were much lower than their equilibrium values within the steel matrix, i.e., the steel matrix was supersaturated with Mn and S against the inclusions. The formation of a Mn-depleted zone around an inclusion and the precipitation of a MnS phase on the inclusion were greatly affected by the thermal history of the steel. Slow cooling helped the formation of both the Mn-depleted zone and the MnS phase on the inclusion, but fast cooling suppressed it. Subsequent isothermal holding at 1200 °C diminished the existing Mn-depleted zone in slow-cooled steel, but created a Mn-depleted zone for fast-cooled steel. The mass transfer within an inclusion was sluggish, and the formation of a MnS phase is due to the local saturation of Mn and S at the outer part of an inclusion. It was suggested that the major factors affecting the formation of the Mn-depleted zone and the MnS phase are the cooling rate, isothermal holding, and the sulfide capacity of the inclusion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · High-Temperature Coating Behaviors · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. I. Madariaga, J.L. Romero, and I. Gutiérrez: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1003–15.10.1007/s11661-998-1009-x ↗
2. J.-H. Shim, Y.W. Cho, S.H. Chung, J.-D. Shim, and D.N. Lee: J. Kor. Inst. Met. Mater., 1998, vol. 36, pp. 1993–2002.
3. J.M. Gregg and H.K.D.H. Bhadeshia: Acta Mater., 1997, vol. 45, pp. 739–48.10.1016/S1359-6454(96)00187-5 ↗
4. Y. Ueshima, H. Yuyama, S. Mizoguchi, and H. Kajioka: Tetsu-to-Hagané, 1989, vol. 75(3), pp. 123–30.10.2355/tetsutohagane1955.75.3_501 ↗
5. H. Goto, K. Miyazawa, and H. Honma: Iron Steel Inst. Jpn. Int., 1996, vol. 36(5), pp. 537–42.10.2355/isijinternational.36.537 ↗
6. T. Sawai, M. Wakoh, and S. Misoguchi: Tetsu-to-Hagané, 1996, vol. 82(7), pp. 37–42.10.2355/tetsutohagane1955.82.7_587 ↗
7. M. Wakoh, T. Sawai, and S. Mizoguchi: Tetsu-to-Hagané, 1996, vol. 82(7), pp. 43–48.10.2355/tetsutohagane1955.82.7_593 ↗
8. F. Ishikawa and T. Takahashi: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 1128–33.10.2355/isijinternational.35.1128 ↗
9. F. Ishikawa, T. Takahashi, and T. Ochi: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 929–36.10.1007/BF02652268 ↗
10. J. Takamura and S. Mizoguchi: Proc. 6th Int. Iron and Steel Congr., ISIJ, Tokyo, 1990, vol. 1, pp. 591–97.
11. S. Mizoguchi and J. Takamura: Proc. 6th Int. Iron and Steel Congr., ISIJ, Tokyo, 1990, vol. 1, pp. 598–604.
12. T. Sawai, M. Wakoh, Y. Ueshima, and S. Mizoguchi: Proc. 6th Int. Iron and Steel Congr., ISIJ, Tokyo, 1990, vol. 1, pp. 605–11.
13. S. Ogibayashi, K. Yamaguchi, M. Hirai, H. Goto, H. Yamaguchi, and K. Tanaka: Proc. 6th Int. Iron and Steel Congr., ISIJ, Tokyo, 1990, vol. 1, pp. 612–17.
14. J.-H. Shim, Y.W. Cho, S.H. Chung, J.-D. Shim, and D.N. Lee: Acta Mater., 1999, vol. 47 (9), pp. 2751–60.10.1016/S1359-6454(99)00114-7 ↗
15. B.L. Bramfitt: Metall. Trans., 1970, vol. 1, pp. 1987–95.10.1007/BF02642799 ↗
16. I. Madariaga and I. Gutiérrez: Acta Mater., 1999, vol. 47 (3), pp. 951–60.10.1016/S1359-6454(98)00388-7 ↗
17. Y. Tomita, N. Saito, T. Tsuzuki, Y. Tokunaga, and K. Okamoto: Iron Steel Inst. Jpn. Int., 1994, vol. 34 (10), pp. 829–35.10.2355/isijinternational.34.829 ↗
18. K. Yamamoto, T. Hasegawa, and J. Takamura: Iron Steel Inst. Jpn. Int., 1996, vol. 36 (1), pp. 80–86.10.2355/isijinternational.36.80 ↗
19. M. Wakoh, T. Sawai, and S. Mizoguchi: Tetsu-to-Hagané, 1992, vol. 78 (11), pp. 73–80.10.2355/tetsutohagane1955.78.11_1697 ↗
20. Han S. Kim, Hae-Geon Lee, and Woo-Gwang Jung: Iron Steel Inst. Jpn. Int., 1999, vol. 40, suppl., pp. S82-S86.
21. Han S. Kim, Hae-Geon Lee, and Kyung-Shick Oh: Met. Mater., 2000, vol. 6 (4), pp. 305–10.10.1007/BF03028076 ↗
22. M. Wakoh, T. Sawai, and S. Mizoguchi: Iron Steel Inst. Jpn. Int., 1996, vol. 36 (8), pp. 1014–21.10.2355/isijinternational.36.1014 ↗
23. H. Takada, I. Bessho, and T. Ito: Tetsu-to-Hagané, 1976, vol. 62, pp. 13–22.
24. K. Schwerdtfeger: Eisenhūttenwes., 1970, vol. 41, pp. 923–32.
25. K. Oikawa, K. Ishida, and T. Nishizawa: Iron Steel Inst. Jpn. Int., 1997, vol. 37 (4), pp. 332–38.10.2355/isijinternational.37.332 ↗
26. G. Eriksson and K. Hack: Metall. Trans. B, 1990, vol. 21B, pp. 1013–23.10.1007/BF02670272 ↗
27. A. Hasagawa, K. Morita, and N. Sano: Tetsu-to-Hagané, 1995, vol. 81 (12), pp. 1–5.