Failure Mechanisms in High Chrome Oxide Gasifier Refractories
Source abstract
Abstract
Gasification is a high-temperature, high-pressure chemical process used to convert a carbon feedstock into CO and H 2 (syngas) for use in power generation and the production of chemicals. It is also a leading candidate as a source of hydrogen in a hydrogen economy and is one of several technologies expected to see increased use in advanced fossil fuel power systems in the future. Gasification is being evaluated because of its high efficiency, its ability to capture CO 2 for sequestration or reuse in other applications, and its potential for carbon feedstock fuel flexibility. At the heart of the gasification process is a gasifier, a high pressure chemical reaction vessel used to contain the interactions between carbon and water in a shortage of oxygen, producing syngas. The gasifier is lined with high chrome oxide materials to protect the containment vessel. Gasifiers are complex systems, and failure of the refractories used to line them was identified by industry as a limitation to their reliability and availability and to their increased use. NETL researchers have examined spent high-Cr 2 O 3 (over 90 pct Cr 2 O 3 ) refractories from numerous gasifiers to determine in-service failure mechanisms. This analysis revealed that premature failure of the high chrome oxide refractories was related to ash in the carbon feedstock, which liquefies during gasification and interacts with the refractories, leading to wear by chemical dissolution or spalling (structural and chemical). A discussion of this postmortem wear of spent refractory materials and of thermodynamic modeling used to explain microstructural changes leading to wear are explained in this article. This information will serve the basis to develop improved performance refractory materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermal and Kinetic Analysis · Iron and Steelmaking Processes · Graphite, nuclear technology, radiation studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Information available from the UHDE website: www.uhde.biz, The Shell Gasification Process, Aug. 10, 2005.
2. General information from the website for Shell Gas and Power; internet website: www.shell.com, Aug. 1, 2005.
3. N. Richter: Introduction to Gasification (ChevronTexaco), internet website: www.gasification.org/Docs/02Richter.pdf, Aug. 2, 2005.
4. W.A. Selvig and F.H. Gibson: USBM Bull. Pub., 1956, vol. 567, pp. 1–33.
5. S.V. Vassilev, C. Braekman-Danheux, R. Moliner, I Suelves, M. J. Lázaro, and T. Thiemann: Fuel, 2002, vol. 81, pp. 1281–96.10.1016/S0016-2361(02)00060-1 ↗
6. R.E. Conn: Fuel Process. Technol., 1995, vol. 44, pp. 95–103.10.1016/0378-3820(95)00013-W ↗
7. R.W. Bryers: Fuel Process. Technol., 1995, vol. 44, pp. 121–41.10.1016/0378-3820(94)00118-D ↗
8. “Gasification Markets and Technologies–Present and Future–An Industry Perspective,” US DOE/FE Report No. 0447, US DOE, Washington, DC, July 2002, pp. 1–53.
9. G. Stiegel and S. Clayton: DOE Gasification Industry R&D Survey: A Perspective of Long Term Market Trends and R&D Needs, Proc. Gasification Technologies 2001 Annual Meeting, San Francisco, CA, 2001.
10. W.T. Bakker, S. Greenberg, M. Trondt, and U. Gerhardus: Am. Ceram. Soc. Bull., 1984, vol. 63 (7), pp. 870–76.
11. J.A. Bonar, C.R. Kennedy, and R.B. Swaroop: Am. Ceram. Soc. Bull., 1980, vol. 59 (4), pp. 473–78.
12. G. Sorell, M.J. Humphries, E. Bullock, and M. Van de Voorde: Int. Met. Rev., 1986, vol. 31 (5), pp. 216–42.
13. W.A. Taber: Refract. Applic. News, 2003, vol. 8 (4), pp. 18–22.
14. R.C. Johnson and M.S. Crowley: Proc. Unified International Technical Conf. on Refractories, UNITECR ‘05, Orlando, FL, Nov. 2005, J.D. Smith, ed., American Ceramic Society, Cleveland, OH, pp. 1–4.
15. N.S. Raymon and L.Y. Saddler III: “Refractory Linings Materials for Coal Gasifiers—A Literature Review of Reactions Involving High-Temperature Gas and Alkali Metal Vapors,” USBM Information Circular 8721, U.S. Bureau of Mines, Washington, DC, 1976, pp. 1–22.
16. S. Greenberg and R.B. Poeppel: “The Corrosion of Ceramic Refractories Exposed to a Synthetic Coal Slag by Means of the Rotating-Drum Technique,” Research Report ANL/FE–85-9, research sponsored by USDOE/FE, pp. 1–15.
17. S. Greenberg and R.B. Poeppel: “The Corrosion of Ceramic Refractories Exposed to Synthetic Coal Slags by Means of the Rotation-Cylinder Technique: Final Report,” Research Report No. ANL/FE—85-15, research sponsored by USDOE/FE and EPRI, Apr. 1986, pp. 1–66.
18. C.R. Kennedy and R.B. Poeppel: Interceramics, 1978, vol. 27 (3), pp. 221–26.
19. C.R. Kennedy, R. Swaroop, D. J. Jones, R. J. Fousek, R. B. Poeppel, and D. Stahl: “Evaluation of Ceramic Refractories for Slagging Gasifiers: Summary of Progress to Date,” ANL Report No. 78-61, research sponsored by USDOE, Sept. 1978.10.2172/6530190 ↗
20. A.P. Starzacher: Radex-Rundschau, 1988, vol. 1, pp. 491–501.
21. R.E. Dial: Am. Ceram. Soc. Bull., 1975, vol. 54 (7), pp. 640–43.
22. M.S. Crowley: Am. Ceram. Soc. Bull., 1975, vol. 54 (12), pp. 1072–74.
23. J. Nakano, J. Bennett, K.S. Kwong, S. Seetharaman, and T. Moss: Proc. VIII Int. Conf. on Molten Slags, Fluxes, and Salts, Santiago, Chile, Jan. 18–21, Gecamin Ltd., Santiago, Chile, 2009, pp. 1–10.
24. Z. Guo: Internet publication of the Am. Ceram. Soc. Bull., June 2004, pp. 9101–08, www.cerramicbulletin.org.
25. J.P. Bennett, K.S. Kwong, and J. Nakano: Proc. COM 2010, Vancouver, BC, Canada, Oct. 3–8, 2010, Advances in Refractories V—The Michel Rigaud Symp., G. Opera and J.G. Hemrick, eds., The Canadian Institute of Mining, Metallurgy and Petroleum, West Westmount, Québec, Canada, 2010, pp. 279–92.
26. W.T. Bakker: Key Engineering Materials, Trans Tech Publications, Aedermannsdorf, Switzerland, 1993, vol. 88, pp. 41–70.10.4028/www.scientific.net/KEM.88.41 ↗
27. W.L. Headrick, Jr., M. Karakus, and X. Laing: “Refractory for Black Liquor Gasifiers,” Topical Report Task 1.4, DOE Award No. DE-FC26-02NT41491, Oct. 2005.
28. J.R. Keiser, J.G. Hemrick, J.P. Gorog, and R. Leary: “Improved Materials for High-Temperature Black Liquor Gasification,” Technical Report No. ORNL/TM-2006/71, June 2006.10.2172/885152 ↗
29. R.E. Williford, K.I. Johnson, and S.K. Sundaram: Ceram. Int., 2008, vol. 34, pp. 2085–89.10.1016/j.ceramint.2007.08.011 ↗
30. ACerS-NIST Phase Equilibria Diagrams CD-ROM Database Version 3.1, American Ceramic Society, Cleveland, OH, 2010.