Incorporation of Solid Solution Alloying Effects into Polycrystal Modeling of Mg Alloys
Source abstract
Abstract
Discrepancies between the strength of slip systems determined directly from Mg single-crystal studies and those estimated from polycrystal simulations of Mg alloys are known to exist. These discrepancies have prohibited the direct use of single-crystal data within polycrystal models, ultimately leading to an increase in the number of adjustable parameters in such models and, accordingly, difficulties in extending such models to Mg alloys of industrial and technological relevance. In this work, a framework is introduced that eliminates these differences by accounting for continuum mechanical and physical metallurgical effects. With respect to the former, it is shown that a stiffer self-consistent grain–matrix interaction scheme than that commonly used better captures the behavior of textured Mg alloy AZ31. With respect to the latter, the impact of grain size and solute concentration on individual deformation modes is considered. Because of a lack of sufficient experimental data describing all possible deformation modes, only basal slip and prismatic slip are treated quantitatively. Of particular note is the strong solid solution strengthening of the basal slip mode and the moderate solute softening of the prismatic slip mode by the common alloying elements Al and Zn. An empirical model describing the Zn solute and temperature dependence of thermally activated prismatic slip is presented. The presented methodology provides a first attempt to eliminate the need for trial-and-error–based approach for determining the slip system flow stress parameters of polycrystal models. Areas where advances in the presented analysis may be attained are highlighted.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. C.S. Roberts 1960 Magnesium and Its Alloys, Wiley, New York, NY.
2. S.R. Agnew, C.N. Tomé, D.W. Brown, T.M. Holden, and S.C. Vogel: Scripta Mater., 2003, vol. 48, pp. 1003-08.10.1016/S1359-6462(02)00591-2 ↗
3. S.R. Agnew, D.W. Brown, and C.N. Tomé: Acta Mater., 2006, vol. 54, pp. 4841-52.10.1016/j.actamat.2006.06.020 ↗
4. B. Clausen, C.N. Tomé, D.W. Brown, and S.R. Agnew: Acta Mater., 2008, vol. 56, pp. 2456-68.10.1016/j.actamat.2008.01.057 ↗
5. O. Muránsky, D.G. Carr, M.R. Barnett, E.C. Oliver, and P. Šittner: Mater. Sci. Eng. A, 2008, vol. 496, pp. 14-24.10.1016/j.msea.2008.07.031 ↗
6. A. Jain and S.R. Agnew: Mater. Sci. Eng. A, 2007, vol. 462, pp. 29-36.10.1016/j.msea.2006.03.160 ↗
7. C.J. Neil and S.R. Agnew: Int. J. Plast., 2009, vol. 25, pp. 379-98.10.1016/j.ijplas.2008.05.003 ↗
8. T. Ebeling, C. Hartig, and R. Bormann: Magnesium Technology, E.A. Nyberg, S.R. Agnew, N.R. Neelameggham, and M.O. Pekguleryuz, eds., TMS, San Francisco, CA, 2009, pp. 531–35.
9. S.R. Agnew and Ö. Duygulu: Int. J. Plast., 2005, vol. 21, pp. 1161-93.10.1016/j.ijplas.2004.05.018 ↗
10. H. Wang, B. Raeisinia, P.D. Wu, S.R. Agnew, and C.N. Tomé: Int. J. Solids Struct., 2010, vol. 47, pp. 2905–17.10.1016/j.ijsolstr.2010.06.016 ↗
11. A. Staroselsky and L. Anand: Int. J. Plast., 2003, vol. 19, pp. 1843-64.10.1016/S0749-6419(03)00039-1 ↗
12. S. Graff, W. Brocks, and D. Steglich: Int. J. Plast., 2007, vol. 23, pp. 1957-78.10.1016/j.ijplas.2007.07.009 ↗
13. A. Styczynski, C. Hartig, J. Bohlen, and D. Letzig: Scripta Mater., 2004, vol. 50, pp. 943-47.10.1016/j.scriptamat.2004.01.010 ↗
14. M.R. Barnett, Z. Keshavarz, and X. Ma: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2283-93.10.1007/BF02586147 ↗
15. C.N. Tomé and G.R. Canova: Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties, U.F. Kocks, C.N. Tomé, H.-R. Wenk, eds., Cambridge University Press, Cambridge, MA, 1998, pp. 466–511.
16. H. Conrad and W.D. Robertson: Trans. AIME, 1957, vol. 209, pp. 503-12.
17. P.W. Bakarian and C.H. Mathewson: Trans. AIME, 1943, vol. 152, pp. 226-54.
18. E.C. Burke and W.R. Hibbard: Trans. AIME, 1952, vol. 194, pp. 295-303.
19. W.F. Sheely and R.R. Nash: Trans. TMS-AIME, 1960, vol. 218, pp. 416-23.
20. A. Akhtar and E. Teghtsoonian: Acta Metall., 1969, vol. 17, pp. 1339-49.10.1016/0001-6160(69)90151-5 ↗
21. R.E. Reed-Hill and W.D. Robertson: Trans. AIME, 1957, vol. 209, pp. 496-502.
22. A. Akhtar and E. Teghtsoonian: Acta Metall., 1969, vol. 17, pp. 1351-56.10.1016/0001-6160(69)90152-7 ↗
23. A. Couret and D. Caillard: Acta Metall., 1985, vol. 33, pp. 1447-54.10.1016/0001-6160(85)90045-8 ↗
24. P. Ward Flynn, J. Mote, J.E. Dorn 1961 Trans. TMS-AIME, vol. 221, pp. 1148-54.
25. T. Obara, H. Yoshinaga, and S. Morozumi: Acta Metall., 1973, vol. 21, pp. 845-53.10.1016/0001-6160(73)90141-7 ↗
26. J.F. Stohr and J.P. Poirier: Phil. Mag., 1972, vol. 25, pp. 1313-29.10.1080/14786437208223856 ↗
27. A. Akhtar and E. Teghtsoonian: Phil. Mag., 1972, vol. 25, pp. 897-916.10.1080/14786437208229311 ↗
28. H. Yoshinaga and R. Horiuchi: Trans. JIM, 1963, vol. 5, pp. 14-21.10.2320/matertrans1960.5.14 ↗
29. M.M. Avedesian: Magnesium and Magnesium Alloys, ASM International, Materials Park, OH, 1999.
30. M.A. Meyers and K.K. Chawla: Mechanical Metallurgy: Principles and Applications, Prentice-Hall, Upper Saddle River, NJ, 1984.
31. G.J. Davies 1971 Strengthening Methods in Crystals, A. Kelly and R.B. Nicholson, eds., Wiley, New York, NY, p. 485.
32. P.B. Hirsch and J.S. Lally: Phil. Mag., 1965, vol. 12, pp. 595-648.10.1080/14786436508218903 ↗
33. C.N. Tomé, R.A. Lebensohn, and U.F. Kocks: Acta Metall. Mater., 1991, vol. 39, pp. 2667-80.10.1016/0956-7151(91)90083-D ↗
34. A. Jain, Ö. Duygulu, D.W. Brown, C.N. Tomé, and S.R. Agnew: Mater. Sci. Eng. A, 2008, vol. 486, pp. 545-55.10.1016/j.msea.2007.09.069 ↗
35. R.A. Lebensohn and C.N. Tomé: Acta Mater., 1993, vol. 41, pp. 2611-24.10.1016/0956-7151(93)90130-K ↗
36. R.A. Lebensohn, P.A. Turner, J.W. Signorelli, G.R. Canova, and C.N. Tomé: Model. Simul. Mater. Sc., 1998, vol. 6, pp. 447-65.10.1088/0965-0393/6/4/011 ↗
37. A. Molinari, G.R. Canova, and S. Ahzi: Acta Metall., 1987, vol. 35, pp. 2983-94.10.1016/0001-6160(87)90297-5 ↗
38. R.J. Asaro: Adv. Appl. Mech., 1983, vol. 23, pp. 1-115.10.1016/S0065-2156(08)70242-4 ↗
39. G.R. Canova and U.F. Kocks: 7th Int. Conf. on Textures of Materials. Netherlands: Society for Materials Science, C.M. Brakman, P. Jongenburger, and E.J. Mittemeijer, eds., 1984, pp. 573–79.
40. R.J. Asaro and A. Needleman: Acta Metall., 1985, vol. 33, pp. 923-53.10.1016/0001-6160(85)90188-9 ↗
41. C.N. Tomé: Model. Simul. Mater. Sci. Eng., 1999, vol. 7, pp. 723-38.10.1088/0965-0393/7/5/305 ↗
42. R. Masson, M. Bornert, P. Suquet, and A. Zaoui: J. Mech. Phys. Solid, 2000, vol. 48, pp. 1203-27.10.1016/S0022-5096(99)00071-X ↗
43. R.A. Lebensohn, C.N. Tomé, and P.J. Maudlin: J. Mech. Phys. Solid, 2004, vol. 52, pp. 249-78.10.1016/S0022-5096(03)00114-5 ↗
44. C.N. Tomé, G.R. Canova, U.F. Kocks, N. Christodoulou, and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 1637-53.10.1016/0001-6160(84)90222-0 ↗
45. E.O. Hall: Proc. Phys. Soc., 1951, vol. B64, p. 747.10.1088/0370-1301/64/9/303 ↗
46. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, p. 25.
47. R.L. Fleischer: The Strengthening of Metals, Ed. D. Peckner, Reinhold, New York, NY, 1964, pp. 93-140.
48. R. Labusch: Phys. Solid State, 1970, vol. 41, pp. 659-69.10.1002/pssb.19700410221 ↗
49. U.F. Kocks: 5th International Conference on the Strength of Metals and Alloys (ICSMA-5), P. Haasen, V. Gerold, and G. Kostorz, eds., Pergamon, Aachen, Germany, 1979, pp. 1661–80.
50. A. Seeger: Dislocations and Mechanical Properties of Crystals, J.C. Fisher, W.G. Johnston, R. Thomson, and T. Vreeland, eds., Wiley, Lake Placid, NY, 1957, pp. 243–329.
51. A.S. Argon 2008 Strengthening Mechanisms in Crystal Plasticity, Oxford University Press, New York, NY.
52. U.F. Kocks, A.S. Argon, and M.F. Ashby: Prog. Mater. Sci., 1975, vol. 19, pp. 1-288.10.1016/0079-6425(75)90005-5 ↗
53. D. Caillard, J.L. Martin 2003 Thermally Activated Mechanisms in Crystal Plasticity, Pergamon Press, Amsterdam, The Netherlands.
54. A. Couret, D. Caillard, W. Püschl, and G. Schoeck: Phil. Mag. A, 1991, vol. 63, pp. 1045-57.10.1080/01418619108213936 ↗
55. W. Püschl: Prog. Mater. Sci., 2002, vol. 47, pp. 415-61.10.1016/S0079-6425(01)00003-2 ↗
56. G.I. Taylor: J. Jpn. Inst. Met., 1938, vol. 62, pp. 307-24.
57. J.F. Bishop and R. Hill: Phil. Mag., 1951, vol. 42, p. 1298.10.1080/14786444108561385 ↗
58. P.R. Dawson and A.J. Beaudoin: Texture and Anisotropy: Preferred Orientations in Polycrystals and their Effect on Materials Properties, U.F. Kocks, C.N. Tomé, and H.-R. Wenk, eds., Cambridge University Press, Cambridge, MA, 1998, pp. 512–31.
59. J.D. Eshelby: Proc. Roy. Soc. A, 1957, vol. 241, pp. 376-96.10.1098/rspa.1957.0133 ↗
60. J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama, and K. Higashi: Acta Mater., 2003, vol. 51, pp. 2055-65.10.1016/S1359-6454(03)00005-3 ↗
61. J.C.M. Li: Trans. TMS-AIME, 1963, vol. 227, p. 239.
62. H. Conrad: Acta Metall., 1963, vol. 11, p. 75.10.1016/0001-6160(63)90134-2 ↗
63. G.I. Taylor: Proc. Roy. Soc. A, 1934, vol. 145, p. 362.10.1098/rspa.1934.0106 ↗
64. W.B. Hutchinson and M.R. Barnett: Scripta Mater., 2010, vol. 63, pp. 737-40.10.1016/j.scriptamat.2010.05.047 ↗
65. J.A. Yasi, L.G. Hector Jr., and D.R. Trinkle 2010 Acta Mater., vol. 58, pp. 5704-13.10.1016/j.actamat.2010.06.045 ↗
66. H. Neuhäuser and C. Schwink: Material Science and Technology: A Comprehensive Treatment, vol. 6, R.W. Cahn, P. Hassen, and E.J. Kramer, eds., VCH, Weinheim, Germany, 1993, pp. 191–250.
67. E. Pink and R.J. Arsenault: Prog. Mater. Sci., 1980, vol. 24, pp. 1-50.10.1016/0079-6425(79)90003-3 ↗
68. A. Ahmadieh, J. Mitchell, and J.E. Dorn: Trans. TMS-AIME, 1965, vol. 233, pp. 1130-38.
69. H. Yoshinaga and R. Horiuchi: Trans. JIM, 1963, vol. 4, pp. 134-41.10.2320/matertrans1960.4.134 ↗
70. A. Urakami: Ph.D. Dissertation, Northwestern University, Evanston, IL, 1970.
71. A. Urakami and M.E. Fine: Scripta Metall., 1970, vol. 4, pp. 667-71.10.1016/0036-9748(70)90203-6 ↗
72. A. Urakami and M.E. Fine: First Int. Conf. on Mechanical Behavior of Materials, S. Taira and M. Kunugi, eds., Society of Materials Science, Kyoto, Japan, 1971, pp. 87–96.
73. T.E. Mitchell and P.L. Raffo: Can. J. Phys., 1967, vol. 45, pp. 1047-62.10.1139/p67-077 ↗
74. R.J. Arsenault: Acta Metall., 1960, vol. 17, pp. 1291-97.10.1016/0001-6160(69)90144-8 ↗
75. A. Sato and M. Meshii: Acta Metall., 1973, vol. 21, pp. 753-68.10.1016/0001-6160(73)90040-0 ↗
76. D.R. Trinkle and C. Woodward: Science, 2005, vol. 310, pp. 1665-67.10.1126/science.1118616 ↗
77. E. Meza-García, J. Bohlen, D. Letzig, and K.U. Kainer: Magnesium Technology 2007, R.S. Beals, A.A. Luo, N.R. Neelameggham, and M.O. Pekguleryuz, eds., TMS, Orlando, FL, pp. 531–35.
78. S. Ando and H. Tonda: Trans. JIM, 2000, vol. 41, pp. 1188-91.10.2320/matertrans1989.41.1188 ↗
79. J.F. Nie: Scripta Mater., 2003, vol. 48, pp. 1009-15.10.1016/S1359-6462(02)00497-9 ↗
80. G. Monnet, B. Devincre, and L.P. Kubin: Acta Mater., 2004, vol. 52, pp. 4317-28.10.1016/j.actamat.2004.05.048 ↗