Experimental investigation and thermodynamic calculation of the Ti-Ni-Cu shape memory alloys
Source abstract
Abstract
The effect of Cu content on the thermoelastic martensitic transformation in TiNi shape memory alloys (SMAs) was systematically investigated by means of differential scanning calorimetry (DSC). Martensitic transformation temperatures and transformation enthalpy were measured for a series of alloys with composition Ti50Ni50−x Cu x (x = 0 to 13 at. pct). The measured data were then used to evaluate the thermodynamic properties of the low-temperature orthorhombic B19 and monoclinic B19′ phases using a two-sublattice model (Ni, Cu, Va)0.5(Ni, Cu, Ti)0.5 in combination with the thermodynamic description of the parent B2 phase. The vertical section of the pseudobinary TiNi-TiCu was calculated including the B19 and B19′ phases. Transformation enthalpy and stress rate were predicted for the ternary TiNiCu SMAs, which are in reasonable agreement with experimental data.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Y. Shugo, H. Hasegawa, and T. Honma: Bull. Res. Inst. Mineral Dress. Metall., Tohoku Univ., 1981, vol. 37, pp. 79–88.
2. O. Mercier, K.N. Melton, R. Gotthardt, and A. Kulik: Proc. Int. Conf. on Solid-Solid Phase Transformation, H.L. Aaronson et al., eds., 1982, pp. 1259–63.
3. O. Mercier and K.N. Melton: Metall. Trans. A, 1979, vol. 10A, pp. 387–89.10.1007/BF02658353 ↗
4. J.L. Proft, K.N. Melton, and T.W. Duerig: Proc. Int. MRSConf., Tokyo, MRS, Pittsburgh, PA, 1989, pp. 159–64.
5. W.J. Moberly and K.N. Melton: Engineering A spects of Shape Memory Alloys, Butterworth-Heinemann Ltd., Stoneham, MA, 1990, pp. 46–57.10.1016/B978-0-7506-1009-4.50008-1 ↗
6. T.H. Nam, T. Saburi, Y. Kawamura, and K. Shimizu: Mater. Trans., JIM, 1990, vol. 31(4), pp. 262–69.10.2320/matertrans1989.31.262 ↗
7. T.H. Nam, T. Saburi, and K. Shimizu: Mater. Trans., JIM, 1990, vol. 31(11), pp. 959–67.10.2320/matertrans1989.31.959 ↗
8. T.H. Nam, T. Saburi, Y. Nakata, and K. Shimizu: Mater. Trans., JIM, 1990, vol. 31(12), pp. 1050–56.10.2320/matertrans1989.31.1050 ↗
9. T. Fukuda, T. Saburi, T. Chihara, and Y. Tsuzuki: Mater. Trans., JIM, 1995, vol. 36(10), pp. 1244–48.10.2320/matertrans1989.36.1244 ↗
10. T. Hashinaga, S. Miyazaki, T. Ueki, and H. Horikawa: J. Phys. IV, Coll. C8, Suppl. J. Phys. III, 1996, vol. 5, pp. 689–94.
11. J. Ortin and A. Planes: Acta Metall., 1988, vol. 36, pp. 1873–89.10.1016/0001-6160(88)90291-X ↗
12. J. Ortin and A. Planes: Acta Metall., 1989, vol. 37, pp. 1433–41.10.1016/0001-6160(89)90175-2 ↗
13. W. Tang, R. Sandström, B. Sundman, and C. Qiu: Acta Metall., 1999, vol. 47, pp. 3457–68.
14. Z.G. Wei, W. Tang, R. Sandström, and S. Miyazaki: Royal Institute of Technology, Stockholm, unpublished research, 1999.
15. W. Tang, R. Sandström, and S. Miyazaki: J. Phase Equilibria, 2000, vol. 21, pp. 227–34.10.1361/105497100770340020 ↗
16. H. Funakubo: Shape Memory Alloys, Gordon & Breach Science Publishers, New York, NY, 1987.
17. R.J. Wasilewski, S.R. Butler, J.E. Hanlon, and D. Worden: Metall. Trans., 1971, vol. 2, pp. 229–38.10.1007/BF02662662 ↗
18. W. Tang: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 537–44.10.1007/s11661-997-0041-6 ↗
19. B. Sundman, B. Jansson, and J.-O. Andersson: CALPHAD, 1985, vol. 9, pp. 153–90.10.1016/0364-5916(85)90021-5 ↗
20. T. Tadaki and C.M. Wayman: Metallography, 1982, vol. 15, pp. 233–45.10.1016/0026-0800(82)90004-0 ↗
21. K.N. Melton and O. Mercier: Acta Metall., 1981, vol. 29, pp. 393–98.10.1016/0001-6160(81)90165-6 ↗
22. Company data sheet from KANTO Special Steel Works, Ltd., Fujisawa, Japan, 1990.