Effects of tungsten particle size and copper content on densification of liquid-phase-sintered W-Cu
Source abstract
Abstract
Tungsten and copper exhibit negligible solubility for each other, so densification during liquid-phase sintering of W-Cu is limited to rearrangement of the W particles and solid-state sintering of the W skeleton. Experiments are conducted to evaluate the effects of Cu volume fraction and particle size on these densification mechanisms. Dilatometry shows that particle rearrangement is limited for low Cu volume fractions and large W particle sizes. After an initial rearrangement stage, densification rates at low Cu volume fractions decrease to those of solid-state sintering of W. Higher Cu volume fractions enable high sintered densities through rearrangement. The dominance of rearrangement or solid-state sintering is determined by the balance of capillary and bonding forces, which depends on the particle size and the ratio of the neck diameter to the particle diameter.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. H.S. Cannon and F.V. Lenel: Plansee Proc., F. Benesovsky, ed., Metallwerk Plansee, Reutte, Austria, 1953, pp. 106–22.
2. V.N. Ermenko, Y.V. Naidich, and I.A. Lavrinenko: Liquid Phase Sintering, Consultants Bureau, New York, NY, 1970.10.1007/978-1-4757-5665-4 ↗
3. R.M. German: Liquid Phase Sintering, Plenum Press, New York, NY, 1985.10.1007/978-1-4899-3599-1 ↗
4. K.V. Sebastian and G.S. Tendolkar: Int. J. Powder Metall. Powder Tech., 1979, vol. 15 (1), pp. 45–53.
5. A.K. Bhalla and J.D. Williams: Powder Metall., 1976, vol. 19, pp. 331–40.10.1179/pom.1976.19.1.31 ↗
6. W.D. Kingery: J. Appl. Phys., 1959, vol. 30, pp. 301–06.10.1063/1.1735155 ↗
7. J.L. Johnson, J.J. Brezovksy, and R.M. German: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1557–65.10.1007/s11661-005-0247-4 ↗
8. J.L. Johnson, K.F. Hens, and R.M. German: in Tungsten and Refractory Metals—1994, A. Bose and R.J. Dowding, eds., Metal Powder Industry Federation, Princeton, NJ, 1995, pp. 246–52.
9. I.H. Moon: in First Japan-Korea Workshop on PIM, S. Ahn and N.J. Kim, eds., Research Institute of Industrial Science and Technology, Pohang, Kyungbuk, Korea, 1997, pp. 67–81.
10. I.H. Moon, S.S. Ryu, and J.C. Kim: Proc. 14th Int. Plansee Seminar, G. Kneringer, P. Rodhammer, and P. Wilhartitz, eds., Metallwerk Plansee, Reutte, Austria, 1997, vol. 1, pp. 17–26.
11. J.S. Lee, E.S. Yoon, and J.H. Yu: Proc. 1998 PM World Congr., European Powder Metallurgy Association, Shrewsbury, United Kingdom, 1998, published on CD.
12. I.H. Moon, E.P. Kim, and G. Petzow: Powder Metall., 1998, vol. 41, pp. 51–57.10.1179/pom.1998.41.1.51 ↗
13. J.C. Kim, S.S. Ryu, H. Lee, and I.H. Moon: Int. J. Powder Met., 1999, vol. 35 (4), pp. 47–55.
14. J.C. Kim, S.S. Ryu, and I.H. Moon: J. Adv. Mater., 1999, vol. 31 (4), pp. 37–44.
15. S.S. Ryu, Y.D. Kim, and I.H. Moon: J. Alloys Compounds, 2002, vol. 335, pp. 233–40.10.1016/S0925-8388(01)01805-9 ↗
16. J.L. Johnson and R.M. German: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 901–09.10.1007/s11663-996-0003-1 ↗
17. F. Dore, C.L. Martin, and C.H. Allibert: Mater. Sci. Eng. A, 2004, vol. 383, pp. 390–98.10.1016/j.msea.2004.05.050 ↗
18. J.L. Johnson: Ph.D. Thesis, The Pennsylvania State University, University Park, PA, 1994.
19. C.M. Kipphut, A. Bose, S. Farooq, and R.M. German: Metall. Trans. A, 1988, vol. 19A, pp. 1905–13.10.1007/BF02645192 ↗
20. J.L. Johnson, A. Upadhyaya, and R.M. German, Metall. Mater. Trans. B, 1998, vol. 29B, pp. 857–66.10.1007/s11663-998-0145-4 ↗
21. R.M. German and Z.A. Munir: High Temp. Sci., 1976, vol. 8, pp. 267–80.
22. R.M. German and Z.A. Munir: Metall. Trans. A, 1976, vol. 7A, pp. 1873–77.10.1007/BF02654983 ↗
23. S. Farooq and R.M. German: in Sintering ’87, S. Somiya, M. Shimada, M. Yoshimura, and R. Watanabe, eds., Elsevier Applied Science, London, 1988, vol. 1, pp. 459–64.
24. A. Upadhyaya and R.M. German: Int. J. Powder Met., 1998, vol. 34 (2), pp. 43–55.
25. J.H. Bechtold, E.T. Wessel, and L.L. France: in Refractory Metals and Alloys, M. Semchyshen and J.J. Harwood, eds., Interscience Publishers, New York, NY, 1961, pp. 25–81.
26. V.V. Panichkina, M.M. Sirotyuk, and V.V. Skorokhod: Sov. Powder Met. Metall. Ceram., 1982, vol. 21, pp. 447–50.10.1007/BF00801752 ↗
27. R.M. German: Sintering Theory and Practice, John Wiley & Sons, New York, NY, 1996.