Applications in the Nuclear Industry for Thermal Spray Amorphous Metal and Ceramic Coatings
Source abstract
Abstract
Amorphous metal and ceramic thermal spray coatings have been developed with excellent corrosion resistance and neutron absorption. These coatings, with further development, could be cost-effective options to enhance the corrosion resistance of drip shields and waste packages, and limit nuclear criticality in canisters for the transportation, aging, and disposal of spent nuclear fuel. Iron-based amorphous metal formulations with chromium, molybdenum, and tungsten have shown the corrosion resistance believed to be necessary for such applications. Rare earth additions enable very low critical cooling rates to be achieved. The boron content of these materials and their stability at high neutron doses enable them to serve as high efficiency neutron absorbers for criticality control. Ceramic coatings may provide even greater corrosion resistance for waste package and drip shield applications, although the boron-containing amorphous metals are still favored for criticality control applications. These amorphous metal and ceramic materials have been produced as gas-atomized powders and applied as near full density, nonporous coatings with the high-velocity oxy-fuel process. This article summarizes the performance of these coatings as corrosion-resistant barriers and as neutron absorbers. This article also presents a simple cost model to quantify the economic benefits possible with these new materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nuclear materials and radiation effects · Metallic Glasses and Amorphous Alloys · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. M. Telford: Mater. Today, 2004, vol. 3, pp. 36–43.10.1016/S1369-7021(04)00124-5 ↗
2. N. Sorensen, and R. Diegle: in Metals Handbook, vol. 13, Corrosion, 9th ed., J.R. Davis and J.D. Destefani, eds., ASME, New York, NY, 1987, pp. 864–70.
3. D. Polk and B. Giessen: in Overview of Principles and Applications, Metallic Glasses, J. Gilman and H. Leamy, eds., ASME, New York, NY, 1978, pp. 2–35.
4. K. Kishitake, H. Era, and F. Otsubo: J. Thermal Spray Technol., 1996, vol. 5 (2), pp. 145–53.10.1007/BF02646428 ↗
5. S. Pang, T. Zhang, K. Asami, and A. Inoue: Mater. Trans., 2002, vol. 43 (8), pp. 2137–42.10.2320/matertrans.43.2137 ↗
6. S. Pang, T. Zhang, K. Asami, and A. Inoue: Acta Mater., 2002, vol. 50, pp. 489–97.10.1016/S1359-6454(01)00366-4 ↗
7. F. Guo, S. Poon, and G. Shiflet: Metallic Appl. Phys. Lett., 2003, vol. 83 (13), pp. 2575–77.10.1063/1.1614420 ↗
8. Z. Lu, C. Liu, and W. Porter: Metallic Appl. Phys. Lett., 2003, vol. 83 (13), pp. 2581–83.10.1063/1.1614833 ↗
9. V. Ponnambalam, S. Poon, and G. Shiflet: JMR, 2004, vol. 19 (5), p. 1320.10.1557/JMR.2004.0176 ↗
10. D. Chidambaram, C. Clayton, and M. Dorfman: Surface Coat. Technol., 2004, vol. 176, pp. 307–17.10.1016/S0257-8972(03)00809-0 ↗
11. J.C. Farmer, J.J. Haslam, S.D. Day, T. Lian, C.K. Saw, P.D. Hailey, J.-S. Choi, R.B. Rebak, N. Yang, J.H. Payer, J.H. Perepezko, K. Hildal, E.J. Lavernia, L. Ajdelsztajn, D. J. Branagan, L.F. Aprigliano: J. Mater. Res., 2007, vol. 22 (8), pp. 2297–2311.10.1557/jmr.2007.0291 ↗
12. J. Farmer, J. Haslam, S. Day, T. Lian, C. Saw, P. Hailey, J. Choi, N. Yang, C. Blue, W. Peter, J. Payer, and D. Branagan: Symp. in Honor of Hugh Issacs, 210th ECS Meeting, N. Missert, ed.; ECS Trans., ECS, 2006, vol. 2 (31), pp. 485–96.10.1149/1.2789251 ↗
13. J. Farmer, J. Haslam, S. Day, T. Lian, C. Saw, P. Hailey, J.-S. Choi, R. Rebak, N. Yang, R. Bayles, L. Aprigliano, J. Payer, J. Perepezko, K. Hildal, E. Lavernia, L. Ajdelsztajn, D.J. Branagan, and M.B. Beardsely: Symp. NN, Materials Research Society Symposium Proceedings, Warrendale, PA, 2006, vol. 985, pp. 255–60.10.1557/PROC-985-0985-NN08-03 ↗
14. J. Farmer, J. Haslam, S. Day, T. Lian, R. Rebak, N. Yang, and L. Aprigliano: PVP2006-ICPVT11-93835, ASME, New York, NY, 2006.
15. J. Farmer, J. Haslam, S. Day, D. Branagan, C. Blue, J. Rivard, L. Aprigliano, N. Yang, J. Perepezko, and M. Beardsley: PVP2005-71664, ASME, New York, NY, 2005.
16. D. Branagan: U.S. Patent Application No. 20040250929, filed Dec. 16, 2004.
17. D. Branagan: U.S. Patent Application No. 20040253381, filed Dec. 16, 2004.
18. T. Lian, D. Day, P. Hailey, J.-S. Choi, and J. Farmer: Symp. NN, Materials Research Society Symposium Proceedings, Warrendale, PA, 2006, vol. 985, pp. 275–80.10.1557/PROC-985-0985-NN08-07 ↗
19. J.-S. Choi, C. Lee, J. Farmer, D. Day, M. Wall, C. Saw, M. Boussoufi, B. Liu, H. Egbert, D. Branagan, and A. D'Amato: Symp. NN, Materials Research Society Symposium Proceedings, Warrendale, PA, 2006, vol. 985, pp. 249–55.10.1557/PROC-985-0985-NN08-02 ↗
20. C. Farmer, J.-S. Choi, C.K. Saw, R.H. Rebak, S.D. Day, T. Lian, P.D. Hailey, J.H. Payer, D.J. Branagan, and L.F. Aprigliano: J. Nucl. Technol., 2008, vol. 161 (2), pp. 169–89.
21. C.K. Saw: in X-Ray Scattering Techniques for Characterization Tools in the Life Sciences, Nanotechnologies for the Life Science, C. Kumar, ed., Wiley-VCH Verlag GmbH and Company, KGaA, Weinheim, 2006, pp. 354–78.
22. C.K. Saw and R.B. Schwarz: J. Less-Common Met., 1988, vol. 140, pp. 385–93.10.1016/0022-5088(88)90399-2 ↗
23. J.E. Harrar, J.F. Carley, W.F. Isherwood, and E. Raber: Report of the Committee to Review the Use of J-13 Well Water in Nevada Nuclear Waste Storage Investigations, UCID-21867, LLNL, Livermore, CA, 1990.10.2172/137644 ↗
24. G.E. Gdowski: YMP TIP-CM-06, Rev. CN TIP-CM-06-0-2, LLNL, Livermore, CA, 1997.
25. G.E. Gdowski: YMP TIP-CM-07, Rev. CN TIP-CM-07-0-2, LLNL, Livermore, CA, 1997.
26. G.E. Gdowski: YMP TIP-CM-08, Rev. CN TIP-CM-08-0-2, LLNL, Livermore, CA, 1997.
27. J. Farmer, S. Lu, D. McCright, G. Gdowski, F. Wang, T. Summers, P. Bedrossian, J. Horn, T. Lian, J. Estill, A. Lingenfelter, and W. Halsey: General and Localized Corrosion of High-Level Waste Container in Yucca Mountain, Transportation, Storage, and Disposal of Radioactive Materials, ASME, New York, NY, PVP, 2000, vol. 408, pp. 53–70.
28. Mineral Commodity Summaries, United States Geological Survey (USGS), January, 2005: Iron and Steel—M. Fenton; Cobalt—K.B. Shedd; Nickel—P.H. Kuck; Chromium—J.F. Papp; Molybdenum—M.J. Magyar and J.W. Blossom; Tungsten—K.B. Shedd; Manganese—T.S. Jones; Titanium—J. Gambogi.
29. J. Farmer, C. Earl, C. Doty, D. Spence, J. Walker, F. Wong, J. Payer, G.-Q. Lu, D.E. Clark, D.C. Folz, A. Heuer, O. Graeve, D. Branagan, C. Blue, J. Rivard, J. Perepezko, L. Kaufman, N. Yang, E. Lavernia, J. Haslam, E. Lemieux, L. Aprigliano, B. Beardsley, T. Weaver, B. Edwards, B. Brown, A. Halter, B Bayles, and J. Lewandowski: DARPA-DOE High Performance Corrosion-Resistant Materials (HCPRM) Principal Investigator’s Meeting, Turtle Bay Resort, Oahu, HI, Jan. 10–13, 2005, UCRL-PRES-214672, Lawrence Livermore National Laboratory, Livermore, CA, 2005.
30. J.C. Farmer: UCRL-PRES-219330, Energy and Environment Directorate Review Committee, Mar. 7–9, 2006, Lawrence Livermore National Laboratory, Livermore, CA, 2006.
31. J.C. Farmer: UCRL-SR-219257, Jan. 2006; contributions by J.C. Farmer, J.-S. Choi, J.J. Haslam, S.D. Day, N. Yang, T. Headley, G. Lucadamo, J.L Yio, J. Chames, A. Gardea, M. Clift, C.A. Blue, W.H. Peters, J.D.K. Rivard, D.C. Harper, D. Swank, R. Bayles and E.J. Lemieux, Robert Brown and Theresa M. Wolejsza, L.F. Aprigliano, D.J. Branagan, M.C. Marshall, Brian E. Meacham, E. Joseph Buffa, M. Brad Beardsley, E.J. Lavernia, J. Schoenung, L. Ajdelsztajn, J. Dannenberg, O.A. Graeve, J.J. Lewandowski, John H. Perepezko, Kjetil Hildal, L.P. Kaufman, and J. Boudreau, Lawrence Livermore National Laboratory, Livermore, CA, 2006.
32. J.C. Farmer, J.J. Haslam, and S.D. Day: UCRL-SR-218144, Jan. 2006, Lawrence Livermore National Laboratory, Livermore, CA, 2006.
33. J. Farmer, J. Haslam, S. Day, T. Lian, C. Saw, P. Hailey, J.-S. Choi, N. Yang, C. Blue, W. Peter, R. Bayles, R. Brown, J. Payer, J. Perepezko, K. Hildal, E. Lavernia, L. Ajdelsztajn, D.J. Branagan, J. Buffa, M. Beardsley, L. Aprigliano, and J. Boudreau: UCRL-TM-224159, Aug. 30, 2006, Lawrence Livermore National Laboratory, Livermore, CA, 2006.
34. J.-S. Choi, J. Farmer, and C. Lee: UCRL-MI-220385, Apr. 5, 2006, Lawrence Livermore National Laboratory, Livermore, CA, 2006; Proc. CALPHAD Meeting, Haifa, Israel, May 11, 2007, vol. 31, p. 408.
35. C.C. Scheffing, K. Jagannadham, M.-S. Yim, M.A. Bourham, J.C. Farmer, J.J. Haslam, S.D. Day, and D.V. Fix: Properties of Titanium-Nitride for High-Level Waste Packaging Enhancement, Nuclear Technology, American Nuclear Society, La Grange Park, IL, 2006, vol. 156, pp. 213–21.
36. J. Farmer, J. Haslam, S. Day, T. Lian, C.-K. Saw, P. Hailey, J.-S. Choi, R. Rebak, J. Payer, C. Blue, W. Peters, and D. Branagan: Proc. Materials Science & Technology 2007, Detroit, MI, Sept. 16–20, 2007, American Ceramic Society (ACerS), Association for Iron & Steel Technology (AIST), American Society of Metals (ASM), and The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 2007, pp. 381–92.
37. L.F. Aprigliano, S.D. Day, J.J. Haslam, J.C. Farmer, and R.B. Rebak: Proc. Materials Science & Technology 2007, Sept. 16–20, 2007, Detroit, MI, American Ceramic Society (ACerS), Association for Iron & Steel Technology (AIST), American Society of Metals (ASM) and The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 2007, pp. 393–400.
38. J.-S. Choi, J. Farmer, C. Lee, L. Fischer, M. Boussoufi, B. Liu, and H. Egbert: Proc. Materials Science & Technology 2007 Conf. and Exhib., Sept. 16–20, 2007, Detroit, MI, American Ceramic Society (ACerS), Association for Iron & Steel Technology (AIST), American Society of Metals (ASM) and the Minerals, Metals & Materials Society (TMS), Warrendale, PA, 2007, pp. 431–42.
39. J. Farmer, S. Day, T. Lian, C.-K. Saw, P. Hailey, J. Payer, L. Aprigliano, B. Beardsley, and D. Branagan: Proc. Materials Science & Technology 2007 Conf. and Exhib., Detroit, MI, Sept. 16–20, 2007, American Ceramic Society (ACerS), Association for Iron & Steel Technology (AIST), American Society of Metals (ASM) and The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 2007, pp. 469–80.
40. J. Farmer: Proc. Materials Science & Technology 2007 Conf. and Exhib., Sept. 16–20 2007, Detroit, MI, American Ceramic Society (ACerS), Association for Iron & Steel Technology (AIST), American Society of Metals (ASM), and The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 2007, pp. 535–66.
41. C.K. Saw, T. Lian, S.D. Day, and J.C. Farmer: Proc. Materials Science & Technology 2007 Conf. and Exhib., Detroit, MI, Sept. 16–20, 2007, American Ceramic Society (ACerS), Association for Iron & Steel Technology (AIST), American Society of Metals (ASM), and The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 2007, pp. 579–87.
42. R.B. Rebak, S.D. Day, T. Lian, P.D. Hailey, and J.C. Farmer: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 225–34, doi: 10.1007/s11661-007-9460-7.10.1007/s11661-007-9460-7 ↗
43. O.A. Graeve, R. Kanakala, L. Kaufman, K. Sinha, E. Wang, B. Pearson, and J.C. Farmer: Mater. Lett., 2007, DOI 10.1016/j.matlet.2008.01.092/4 pages.10.1016/j.matlet.2008.01.092/4 ↗