Creep and rupture properties of a squeeze-cast Mg-Al-Ca alloy
Source abstract
Abstract
A squeeze-cast Mg-Al-Ca alloy (MRI153) was creep tested at 150, 175, and 200 °C under applied stresses in the range of 30 to 120 MPa. The creep curves were characterized by an extended tertiary stage in which the creep rate increases progressively with the creep strain. Microstructural examinations revealed the precipitation and coarsening of new particles during creep. The stress dependence of the minimum creep rate suggests a transition from power-law creep at low stresses to power-law breakdown at high stresses. Creep rupture of this alloy occurred as a result of cavitation damage at dendritic grain boundaries, with the creep rupture time and the minimum creep rate following the empirical Monkman-Grant equation. A comparison is made between the creep and rupture properties of MRI153 and those of a squeeze-cast Mg-Al alloy (AZ91).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. I.A. Anyanwu, Y. Gokan, S. Nozawa, A. Suzuki, S. Kamado, Y. Kojima, S. Takeda, and T. Ishida: Mater. Trans., 2003, vol. 44, pp. 562–70.10.2320/matertrans.44.562 ↗
2. A.A. Luo: in Magnesium Technology 2000, H.I. Kaplan, J. Hryn, and B. Clow, eds., TMS, Warrendale, PA, 2000, pp. 89–98.
3. F. von Buch, S. Schumann, H. Friedrich, E. Aghion, B. Bronfin, B.L. Mordike, M. Bamberger, and D. Eliezer: in Magnesium Technology 2002, H.I. Kaplan, ed., TMS, Warrendale, PA, 2002, pp. 61–67.
4. W. Blum, P. Weidinger, B. Watzinger, R. Sedlacek, R. Rosch, and H.G. Haldenwanger: Z. Metallkd, 1997, vol. 88, pp. 636–41.
5. M. Regev, E. Aghion, M. Bamberger, and A. Rosen: Mater. Sci. Eng., 1997, vol. A234-236, pp. 123–26.10.1016/S0921-5093(97)00215-3 ↗
6. W. Blum, B. Watzinger, and P. Zhang: Adv. Eng. Mater., 2000, vol. 2, pp. 349–55.10.1002/1527-2648(200006)2:6<349::AID-ADEM349>3.0.CO;2-G ↗
7. M.S. Dargusch and G.L. Dunlop: in Magnesium Alloys and Their Applications, B.L. Mordike and K.U. Kainer, eds., Werkstoff-Informationsgesellschaft, Frankfurt, Germany, 1998, pp. 277–82.
8. M. Regev, E. Aghion, A. Rosen, and M. Bamberger: Mater. Sci. Eng., 1998, vol. A252, pp. 6–16.10.1016/S0921-5093(98)00668-6 ↗
9. V. Skelenička, M. Pahutová, K. Kuchařová, M. Svoboda, and T.G. Langdon: Metall. Mater. Trans., 2002, vol. 33A, pp. 883–89.10.1007/s11661-002-0158-6 ↗
10. M. Svoboda, M. Pahutová, K. Kuchařová, V. Skelenička, and T.G. Langdon: Mater. Sci. Eng., 2002, vol. A324, pp. 151–56.10.1016/S0921-5093(01)01298-9 ↗
11. S. Spigarelli: Scripta Mater., 2000, vol. 42, pp. 397–402.10.1016/S1359-6462(99)00361-9 ↗
12. S. Spigarelli, M. Cabibbo, E. Evangelista, M. Talianker, and V. Ezersky: Mater. Sci. Eng., 2000, vol. A289, pp. 172–81.10.1016/S0921-5093(00)00911-4 ↗
13. S. Spigarelli, M. Regev, E. Evangelista, and A. Rosen: Mater. Sci. Technol., 2001, vol. 17, pp. 627–38.10.1179/026708301101510483 ↗
14. M.F. Ashby and B.F. Dyson: in Advances in Fracture Research, S.R. Valluri, D.M.R. Taplin, P. Rama Rao, J.F. Knott, and R. Dubcy, eds., Pergamon Press, Oxford, U.K., 1984, vol. 1, pp. 3–30.
15. B.F. Dyson and T.B. Gibbons: Acta Metall., 1987, vol. 35, pp. 2355–69.10.1016/0001-6160(87)90083-6 ↗
16. A.A. Luo, M.P. Balogh, and B.R. Powell: Metall. Mater. Trans., 2002, vol. 33A, pp. 567–74.10.1007/s11661-002-0118-1 ↗
17. A. Suzuki, N.D. Saddock, J.W. Jones, and T.M. Pollock: Scripta Mater., 2004, vol. 51, pp. 1005–10.10.1016/j.scriptamat.2004.07.011 ↗
18. A. Suzuki, N.D. Saddock, J.W. Jones, and T.M. Pollock: Acta Mater., 2005, vol. 53, pp. 2823–34.10.1016/j.actamat.2005.03.001 ↗
19. S.M. Zhu and J.F. Nie: unpublished research.
20. E. Aghion and B. Bronfin: in Proceedings of 3rd International Magnesium Conference, G.W. Lorimer, ed., Institute of Materials, London, U.K., 1997, pp. 313–25.
21. J. Kiehn, K.U. Kainer, P. Vostrý, and I. Stulíková: Phys. Stat. Sol., 1997, vol. 161, pp. 85–95.10.1002/1521-396X(199705)161:1<85::AID-PSSA85>3.0.CO;2-1 ↗
22. T. Sato, B.L. Mordike, J.F. Nie, and M.V. Kral: in Magnesium Technology 2005, N.R. Neelameggham, H.I. Kaplan, and B.R. Powell, eds., TMS, Warrendale, PA, 2005, pp. 435–40.
23. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps, Pergamon Press, Oxford, U.K., 1982, p. 328.
24. F.C. Monkman and N.J. Grant: Proc. ASTM, 1956, pp. 593–620.
25. H. Burt, J.P. Denison, and B. Whishire: Metal. Sci., 1979, vol. 13, pp. 295–301.10.1179/msc.1979.13.5.295 ↗
26. R.A. Stevens and P.E.J. Flewitt: Acta Metall., 1981, vol. 29, pp. 867–82.10.1016/0001-6160(81)90129-2 ↗
27. F. Abe, S. Nakazawa, H. Araki, and T. Noda: Metall. Trans, 1992, vol. 23A, pp. 469–77.10.1007/BF02801164 ↗
28. B.K. Choudhary, K. Saroja, K. Bhanu Sankara Rao, and S.L. Mannan: Metall. Mater. Trans., 1999, vol. 30A, pp. 2825–34.10.1007/s11661-999-0120-y ↗
29. P. Zhang, B. Watzinger, and W. Blum: Phys. Stat. Sol., 1999, vol. 175, pp. 481–89.10.1002/(SICI)1521-396X(199910)175:2<481::AID-PSSA481>3.0.CO;2-J ↗
30. S.S. Vagarali and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 1157–70.10.1016/0001-6160(82)90009-8 ↗
31. K. Maruyama, M. Suzuki, and H. Sato: Metall. Mater. Trans., 2002, vol. 33A, pp. 875–82.10.1007/s11661-002-0157-7 ↗
32. S.S. Vagarali and T.G. Langdon: Acta Metall., 1981, vol. 29, pp. 1969–82.10.1016/0001-6160(81)90034-1 ↗
33. O.D. Sherby and P.M. Burke: Prog. Mater. Sci., 1967, vol. 13, pp. 325–90.
34. M.S. Soliman: J. Mater. Sci., 1987, vol. 22, pp. 3529–32.10.1007/BF01161453 ↗
35. J. Čadek: Creep in Metallic Materials, Elsevier, Amsterdam, The Netherlands, 1988, p. 176.
36. H. Gjestland, G. Nussbaum, and G. Regazzoni: Mater. Sci. Eng, 1991, vol. A134, pp. 1197–200.10.1016/0921-5093(91)90954-L ↗
37. M.O. Pekguleryuz and J. Renaud: in Magnesium Technology 2000, H.I. Kaplan, J. Hryn, and B. Clow, eds., TMS, Warrendale, PA, 2000, pp. 279–84.10.1002/9781118808962.ch38 ↗
38. Y. Terada, R. Sota, N. Ishimatsu, T. Sato, and K. Ohori: Metall. Mater. Trans., 2004, vol. 35A, pp. 3029–32.10.1007/s11661-004-0046-3 ↗
39. W. Blum, P. Zhang, B. Watzinger, B. van Grossman, and H.G. Haldenwanger: Mater. Sci. Eng, 2001, vol. A319-321, pp. 735–40.10.1016/S0921-5093(00)02016-5 ↗