A model for interphase precipitation in V-microalloyed structural steels
Source abstract
Abstract
A model for interphase precipitation, with a predictive capacity, is presented. This article deals with its application to V-microalloyed steels. The model rests on an analysis of the growth of the V-depleted zone ahead of a sheet of V(C,N) particles and the simultaneous advance of the γ/α interface in which it was nucleated. It is shown that volume diffusion of V cannot explain the observed intersheet spacings and that a faster diffusion process is required. It is postulated that the γ/α boundary will bow out some time after a sheet of V(C,N) particles has formed in it. Part of the V in the γ will then be fed to V(C,N) particles in the sheet by boundary diffusion as the γ transforms to α. The V content at the front will, thus, be lower than the initial content in the austenite. However, the reduction will be less the further the interface has moved away from the sheet of V(C,N) particles. At a sufficient distance, the V content is again high enough to allow new V(C,N) particles to nucleate, and a new sheet of particles will form. Between the two sheets, there will be a ledge (or superledge) that will advance along the first sheet. The height of the ledge will, thus, be determined by the distance in which V(C,N) particles can again be nucleated. The model exhibits reasonably good agreement with observed values of intersheet spacing, with its temperature dependence and transition from interphase to general precipitation, and with its dependence on C, V, and N content. It also provides physically sound explanations of these dependencies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. F.A. Khalid and D.V. Edmonds: Mater. Sci. Technol., 1993, vol. 9, pp. 384–96.10.1179/mst.1993.9.5.384 ↗
2. S. Zajac, T. Siwecki, and M. Korchynsky: Proc. Int. Symp. Low Carbon Steels for the 90’s, ASM/TMS Materials Week, Pittsburgh, PA, Oct. 17–21, 1993, pp. 139–50.
3. S. Zajac, R. Lagneborg, and T. Siwecki: Proc. Int. Conf. Microalloying “95”, ISS, Pittsburgh, PA, 1995 pp. 321–40.
4. R.G. Baker and J. Nutting: Precipitation Processes in Steels, ISI Report, No. 64, ISI, London, 1969, pp. 1–22.
5. R.M. Smith and D.P. Dunne: Mater. Forum, 1988, vol. 11, pp. 166–81.
6. R.W.K. Honeycombe: Proc. Int. Conf. on Technology and Applications of HSLA Steels, ASM, Metals Park, OH, 1983, pp. 243–50.
7. W.C. Johnson, C.L. White, P.E. Marth, P.R. Ruf, S.M. Tuominen, K.D. Wade, K.C. Russell, and H.I. Aaronson: Metall. Trans. A, 1975, vol. 6A, pp. 911–19.10.1007/BF02672315 ↗
8. J.L. Lee and H.I. Aaronson: Acta Metall., 1975, vol. 23, pp. 799–808.10.1016/0001-6160(75)90196-0 ↗
9. A.T. Davenport and R.W.K. Honeycombe: Proc. R. Soc. London, 1971, vol. 322, pp. 191–205.10.1098/rspa.1971.0063 ↗
10. R.W.K. Honeycombe: Metall. Trans. A, 1976, vol. 7A, pp. 915–36.10.1007/BF02644057 ↗
11. R.A. Ricks and P.R. Howell: Acta Metall., 1983, vol. 31, pp. 853–61.10.1016/0001-6160(83)90113-X ↗
12. W. Roberts: Internal Report IM-1333, Swedish Institute for Metals Research, Stockholm, 1978.
13. A.D. Batte and R.W.K. Honeycombe: J. Iron Steel Inst., 1973, vol. 211, pp. 284–89.
14. M. Hillert: Phase Diagrams and Phase Transformations, Cambridge University Press, Cambridge, MA, 1998.
15. G.R. Purdy and J.S. Kirkaldy: Trans. TMS-AIME, 1963, vol. 227, pp. 1255–56.
16. M. Hillert: Metall. Trans. A, 1975, vol. 6A, pp. 5–19.10.1007/BF02673664 ↗
17. M. Hillert and J. Ågren: Advances in Phase Transitions, J.D. Embury and G.R. Purdy, eds., Pergamon Press, Elmsford, NY, 1988, pp. 1–19.
18. R.A. Ricks and P.R. Howell: Met. Sci., 1982, vol. 16, pp. 317–21.10.1016/0036-9748(82)90360-X ↗
19. B. Sundman, B. Jansson, and J.O. Andersson: CALPHAD, 1985, vol. 9, pp. 153–59.10.1016/0364-5916(85)90021-5 ↗
20. S. Zajac: Report IM-3566, Swedish Institute for Metals Research, Stockholm, 1998.
21. K.C. Russell: Adv. Colloid Interface Sci., 1980, vol. 13, pp. 205–318.10.1016/0001-8686(80)80003-0 ↗
22. W.J. Liu, E.B. Hawbolt, and I.V. Samarasekara: Proc. Int. Symp. on Mathematical Modelling of Hot Rolling of Steel, S. Yue, ed., CIM, Hamilton, 1990, pp. 477–87.
23. M. Hillert and J. Ågren: Diffusion and Equilibria—an Advanced Course in Physical Metallurgy, Royal Institute of Technology, Stockholm, 1997.
24. J. Fridberg, L.-E. Törndahl, and M. Hillert: Jernkont. Ann., 1969, vol. 153, pp. 263–76.
25. J.W. Cahn: Acta Metall., 1959, vol. 7, pp. 18–28.10.1016/0001-6160(59)90164-6 ↗
26. M. Hillert: Proc. Int. Symp. on the Mechanism of Phase Transformation in Crystalline Solids, Monograph and Report Series No. 33, Institute of Metals, London, 1969, pp. 231–49.
27. Computer software, MATLAB, MathWorks Co., 1999.
28. R. Lagneborg: Report IM-2000-012, Swedish Institute for Metals Research, Stockholm, 2000.
29. F.B. Pickering: Proc. Int. Conf. on High Nitrogen Steels—Technology and Applications, HNS 88, J. Vogt and A. Henry, eds., The Institute of Metals, London, 1989, pp. 10–31.