journal article·2012-04

A Comparison of Creep Rupture Strength of Ferritic/Austenitic Dissimilar Weld Joints of Different Grades of Cr-Mo Ferritic Steels

K. Laha, K. S. Chandravathi, P. Parameswaran, Sunil Goyal, M. D. Mathew

Publisher page

Abstract

Evaluations of creep rupture properties of dissimilar weld joints of 2.25Cr-1Mo, 9Cr-1Mo, and 9Cr-1MoVNb steels with Alloy 800 at 823 K were carried out. The joints were fabricated by a fusion welding process employing an INCONEL 182 weld electrode. All the joints displayed lower creep rupture strength than their respective ferritic steel base metals, and the strength reduction was greater in the 2.25Cr-1Mo steel joint and less in the 9Cr-1Mo steel joint. Failure location in the joints was found to shift from the ferritic steel base metal to the intercritical region of the heat-affected zone (HAZ) of the ferritic steel (type IV cracking) with the decrease in stress. At still lower stresses, the failure in the joints occurred at the ferritic/austenitic weld interface. The stress-life variation of the joints showed two-slope behavior and the slope change coincided with the occurrence of ferritic/austenitic weld interface cracking. Preferential creep cavitation in the soft intercritical HAZ induced type IV failure, whereas creep cavitation at the interfacial particles induced ferritic/austenitic weld interface cracking. Micromechanisms of the type IV failure and the ferritic/austenitic interface cracking in the dissimilar weld joint of the ferritic steels and relative cracking susceptibility of the joints are discussed based on microstructural investigation, mechanical testing, and finite element analysis (FEA) of the stress state across the joint.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. A.K. Bhaduri, S. Venkadesan, and P. Rodriguez: Int. J. Pres. Ves. Pip., 1994, vol. 58, pp. 251–65.10.1016/0308-0161(94)90061-2 ↗
2. J.D. Parker: Mater. High Temp., 1994, vol. 11, pp. 25–33.10.1080/09603409.1994.11689467 ↗
3. J.D. Parker and G.C. Stratford: J. Mater. Sci., 2000, vol. 35, pp. 4099–4107.10.1023/A:1004846607046 ↗
4. Y. Gong, J. Cao, L. Ji, C. Yang, C. Yao, Z. Yang, J. Wang, X. Luo, F. Gu, A. Qi, S. Ye, and Z. Hu: Fatigue Fract. Eng. Mater. Struct., 2011, vol. 34(2), pp. 83–96.10.1111/j.1460-2695.2010.01496.x ↗
5. K. Laha, K.S. Chandravathi, K. Bhanu Sankara Rao, and S.L. Mannan: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 115–24.10.1007/s11661-001-0107-9 ↗
6. M. Yamazaki, T. Watanabe, H. Hongo, and M. Tabuchi: J. Power Energy Systems, 2008, vol. 2 (4), pp. 1140–49.10.1299/jpes.2.1140 ↗
7. J. An, H. Jing, G. Xiao, L. Zhao, and L. Xu: J. Mater. Eng. Perform., Nov. 6, 2010, online.
8. F. Gauzzi and S. Missori: J. Mater. Sci., 1988, vol. 23, pp. 782–89.10.1007/BF01153967 ↗
9. N.F. Eaton and B.A. Glossop: Met. Const. Br. Weld. J., 1969, pp. 6–10.
10. B. Nath: Proc. Int. Conf. on “Creep Fracture of Engineering Materials and Structures, Part II,” B. Wilshire and D.R.J. Owen, eds., Pineridge Press, Swansea, United Kingdom, 1984, pp. 827–38.
11. R.L. Klueh and J.F. King: Weld. J., 1982, vol. 61 (9), pp. 302s–311s.
12. R. Viswanathan: ASME Trans. J. Pres. Ves. Technol., 1985, vol. 107, pp. 247–54.10.1115/1.3264443 ↗
13. R. Dehmolaei, M. Shamanian, and A. Kermanpur: Mater. Charact., 2008, vol. 59, pp. 1447–54.10.1016/j.matchar.2008.01.013 ↗
14. T.W. Nelson, J.C. Lippold, and M.J. Mills: Weld J.-Res. Suppl., 2000, pp. 267s–277s.
15. N.A. McPherson, T.N. Baker, and D.W. Miller: Metall. Mater. Trans. A, 1997, vol. 19A, pp. 823–32.
16. J.N. DuPont and C.S. Kusko: Weld J.-Res. Suppl., 2007, pp. 51s–54s.
17. A.M. Shariatpanahi and H. Farhangi: Adv. Mater. Res., 2010, vols. 83–86, pp. 449–56.10.4028/www.scientific.net/AMR.83-86.449 ↗
18. R.W. Evans and B. Wilshire: Mech. Mater., 1985, vol. 4, pp. 51–65.10.1016/0167-6636(85)90006-7 ↗
19. Shan-Tung Tu, Peter Segle, and Jian-Ming Gong: Int. J. Pres. Ves. Pip., 1996, vol. 66, pp. 171–86.10.1016/0308-0161(95)00094-1 ↗
20. J. Besson, Y. Madi, A. Motarjemi, M. Kocak, G. Martin, and P. Hornet: Mater. Sci. Eng., 2005, vol. 397, pp. 84–91.10.1016/j.msea.2005.01.056 ↗
21. K. Laha, K.S. Chandravathi, K. Bhanu Sankara Rao, and S.L. Mannan: Trans. Ind. Met. Technol., 1993, vol. 46, pp. 77–87.
22. K.S. Chandravathi, K. Laha, K. Bhanu Sankara Rao, and S.L. Mannan: Mater. Sci. Technol., 2001, vol. 17, pp. 559–65.10.1179/026708301101510212 ↗
23. K. Laha, K. Bhanu Sankara Rao, and S.L. Mannan: Mater. Sci. Eng., 1990, vol. A129, pp. 183–95.10.1016/0921-5093(90)90265-5 ↗
24. K. Laha, K.S. Chandravathi, P. Parameswaran, and K. Bhanu Sankara Rao: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 386–97.10.1007/s11661-008-9724-x ↗
25. R.G. Backer and J. Nutting: JISI, 1959, vol. 192, pp. 257–68.
26. B.W. Jones, C.R. Hills, and D.H. Polonis: Metall. Trans. A, 1991, vol. 22A, pp. 1049–58.10.1007/BF02661098 ↗
27. J.M. Vitek and R.L. Klueh: Metall. Trans. A, 1983, vol. 14, pp. 1047–55.10.1007/BF02670443 ↗
28. C.D. Lundin and P. Liu: WRC Bull., 2002, vol. 475, pp. 29–135.
29. P.J. Alberry and W.K.C. Jones: Met. Technol., 1977, vol. 4, pp. 360–64.10.1179/030716977803292394 ↗
30. P. Roy and T. Lauritzen: Weld. J.-Res. Suppl., 1986, pp. 45s–47s.
31. M. Matsui, M. Tabuchi, T. Watanabe, K. Kubo, J. Kinugawa, and F. Abe: ISIJ Int. Suppl., 2001, vol. 41, pp. S126–S130.10.2355/isijinternational.41.Suppl_S126 ↗
32. Y. Tsuchida, K. Okamoto, and Y. Tokunaga: Weld. Int., 1996, vol. 10 (6), pp. 27–33.10.1080/09507119609549030 ↗
33. L. Dejun, K. Shinozaki, H. Kuriki, H. Harada, and K. Ohishi: Sci. Technol. Weld. Join., 2003, vol. 8 (4), pp. 296–302.10.1179/136217103225005453 ↗
34. K. Laha, K.S. Chandravathi, P. Parameswaran, K. Bhanu Sankara Rao, and S.L. Mannan: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 58–68.10.1007/s11661-006-9050-0 ↗
35. B. Nath: Proc. 4th Int. Conf. on “Welding in Nuclear Engineering,” Deutsdchen Verband fur Schweibtechnik, Dusseldorf, Aken, 1982, pp. 52–56.
36. K.B. Reuter and D.B. Williams: Metall. Trans. A, 1989, vol. 20A, pp. 711–18.10.1007/BF02667588 ↗
37. J. Zhan, D.B. Williams, and J.J. Goldstein: Metall. Mater. Trans. A, 1994, vol. 24A, pp. 1627–37.10.1007/BF02668528 ↗
38. K. Kussmaul, K. Maile, and W. Eckert: in Constraint Effects in Fracture, E.M. Hackett, K.H. Schwalbe, and R.H. Didds, Jr., eds., STP 1171, ASTM, Philadelphia, PA, 1993, pp. 341–60.10.1520/STP18036S ↗
39. C.D. Lundin, S.C. Kelly, R. Menon, and B.J. Kruse: Weld. Res. Counc. Bull., 1986, vol. 315, pp. 1–66.
40. E. Smith and J.T. Barnby: Metall. Sci., 1967, vol. 1, pp. 1–5.10.1016/0036-9748(67)90002-6 ↗
41. R. Raj and M.F. Ashby: Acta Metall., 1975, vol. 23, pp. 653–66.10.1016/0001-6160(75)90047-4 ↗
42. D. Hull and D.E. Rimmer: Phil. Mag., 1959, vol. 4, pp. 673–87.10.1080/14786435908243264 ↗
43. B.F. Dyson: Met. Sci., 1976, vol. 10, pp. 349–53.10.1179/030634576790431417 ↗