journal article·2009-03

Boride Formation Induced by pcBN Tool Wear in Friction-Stir-Welded Stainless Steels

Seung Hwan C. Park, Yutaka S. Sato, Hiroyuki Kokawa, Kazutaka Okamoto, Satoshi Hirano, Masahisa Inagaki

Publisher page

Abstract

The wear of polycrystalline cubic boron nitride (pcBN) tool and its effect on second phase formation were investigated in stainless steel friction-stir (FS) welds. The nitrogen content and the flow stress were analyzed in these welds to examine pcBN tool wear. The nitrogen content in stir zone (SZ) was found to be higher in the austenitic stainless steel FS welds than in the ferritic and duplex stainless steel welds. The flow stress of austenitic stainless steels was almost 1.5 times larger than that of ferritic and duplex stainless steels. These results suggest that the higher flow stress causes the severe tool wear in austenitic stainless steels, which results in greater nitrogen pickup in austenitic stainless steel FS welds. From the microstructural observation, a possibility was suggested that Cr-rich borides with a crystallographic structure of Cr2B and Cr5B3 formed through the reaction between the increased boron and nitrogen and the matrix during FS welding (FSW).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. C.J. Dawes, W.M. Thomas: Weld. J., 1996, vol. 75 (3), pp. 41–45
2. M.W. Mahoney, C.G. Rhodes, J.G. Flintoff, R.A. Spurling, W.H. Bingel: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1955–6410.1007/s11661-998-0021-5 ↗
3. Y.S. Sato, H. Kokawa, M. Enomoto, S. Jogan: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2429–3710.1007/s11661-999-0251-1 ↗
4. Y.S. Sato, H. Kokawa, M. Enomoto, S. Jogan, T. Hashimoto: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3125–3010.1007/s11661-999-0223-5 ↗
5. K. Colligan: Weld. J., 1999, vol. 78, pp. 229s–237s
6. K.V. Jata, K.K. Sankaran, J.J. Ruschau: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2181–9210.1007/s11661-000-0136-9 ↗
7. A.P. Reynolds: Sci. Technol. Weld. Join., 2000, vol. 5, pp. 120–2410.1179/136217100101538119 ↗
8. Y.S. Sato, H. Kokawa: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 3023–3110.1007/s11661-001-0177-8 ↗
9. Y.S. Sato, S.H.C. Park, H. Kokawa: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 3033–4210.1007/s11661-001-0178-7 ↗
10. Y.S. Sato, M. Urata, H. Kokawa, K. Ikeda, M. Enomoto: Scripta Mater., 2001, vol. 45, pp. 109–1410.1016/S1359-6462(01)01000-4 ↗
11. T.U. Seidel, A.P. Reynolds: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2879–8410.1007/s11661-001-1038-1 ↗
12. Y.S. Sato, M. Urata, H. Kokawa: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 625–3510.1007/s11661-002-0124-3 ↗
13. J.Q. Su, T.W. Nelson, R. Mishra, M. Mahoney: Acta Mater., 2003, vol. 51, pp. 713–2910.1016/S1359-6454(02)00449-4 ↗
14. S.H.C. Park, Y.S. Sato, H. Kokawa: Scripta Mater., 2003, vol. 49, pp. 161–6610.1016/S1359-6462(03)00210-0 ↗
15. S.H.C. Park, Y.S. Sato, H. Kokawa: J. Mater. Sci., 2003, vol. 38, pp. 4379–8310.1023/A:1026351619636 ↗
16. Y.S. Sato, Y. Kurihara, S.H.C. Park, H. Kokawa, N. Tsuji: Scripta Mater., 2004, vol. 50, pp. 57–6010.1016/j.scriptamat.2003.09.037 ↗
17. W.M. Thomas, P.L. Threadgill, E.D. Nicholas: Sci. Technol. Weld. Join., 1999, vol. 4, pp. 365–7210.1179/136217199101538012 ↗
18. T.J. Lienert, W.L. Stellwag Jr., B.B. Grimmett, R.W. Warke: Weld. J., 2003, vol. 82, pp. 1s–6s10.1179/136217103225008847 ↗
19. H. Fujii, L. Cui, N. Tsuji, M. Maeda, K. Nakata, K. Nogi: Mater. Sci. Eng. A, 2006, vol. 429, pp. 50–5710.1016/j.msea.2006.04.118 ↗
20. C.D. Sorensen, T.W. Nelson, and S.M. Packer: Proc. 3rd Int. Symp. on Friction Stir Welding, Kobe, Japan, TWI, Cambridge, UK, 2001, CD-ROM
21. A.P. Reynolds, W. Tang, T. Gnaupel-Herold, H. Prask: Scripta Mater., 2003, vol. 48, pp. 1289–9410.1016/S1359-6462(03)00024-1 ↗
22. K. Okamoto, S. Hirano, M. Inagaki, S.H.C. Park, Y.S. Sato, H. Kokawa, T.W. Nelson, and C.D. Sorensen: Proc. 4th Int. Symp. on Friction Stir Welding, Park City, UT, TWI, Cambridge, UK, 2003, CD-ROM
23. Y.S. Sato, T.W. Nelson, C.J. Sterling: Acta Mater., 2005, vol. 53, pp. 637–4510.1016/j.actamat.2004.10.017 ↗
24. Y.S. Sato, T.W. Nelson, C.J. Sterling, R.J. Steel, C.-O. Pettersson: Mater. Sci. Eng. A, 2005, vol. 397, pp. 376–8410.1016/j.msea.2005.02.054 ↗
25. S.H.C. Park, Y.S. Sato, H. Kokawa, K. Okamoto, S. Hirano, M. Inagaki: Scripta Mater., 2003, vol. 49, pp. 1175–8010.1016/j.scriptamat.2003.08.022 ↗
26. S.H.C. Park, Y.S. Sato, H. Kokawa, K. Okamoto, S. Hirano, M. Inagaki: Scripta Mater., 2004, vol. 51, pp. 101–0510.1016/j.scriptamat.2004.04.001 ↗
27. C. Zener, J.H. Hollomon: J. Appl. Phys., 1944, vol. 15, pp. 22–3210.1063/1.1707363 ↗
28. S.F. Medina, C.A. Hernandez: Acta Mater., 1996, vol. 44, pp. 137–4810.1016/1359-6454(95)00151-0 ↗
29. Ø. Frigaard, Ø. Grong, O.T. Midling: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1189–120010.1007/s11661-001-0128-4 ↗
30. K.V. Jata, S.L. Semiatin: Scripta Mater., 2000, vol. 43, pp. 743–4910.1016/S1359-6462(00)00480-2 ↗
31. Y.S. Sato, H. Kokawa, K. Ikeda, M. Enomoto, S. Jogan, T. Hashimoto: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 941–4810.1007/s11661-001-0351-z ↗
32. C. Bindal, A.H. Üçisik: Surf. Coat. Technol., 1999, vol. 122, pp. 208–1310.1016/S0257-8972(99)00294-7 ↗
33. O. Knacke, O. Kubaschewski, K. Hesselmann: Thermochemical Properties of Inorganic Substances 1, 2nd ed., Springer-Verlag, New York, NY, 1991, p. 162
34. K. Iizumi, K. Kudaka: Nippon Kagaku Kaishi, 2000, vol. 6, pp. 369–8010.1246/nikkashi.2000.369 ↗
35. I. Goldfarb, W.D. Kaplan, S. Ariely, M. Bamberger: Phil. Mag. A, 1995, vol. 72, pp. 963–7910.1080/01418619508239947 ↗
36. D.P. Field, T.N. Nelson, Y. Hovanski, K.V. Jata: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2869–7710.1007/s11661-001-1037-2 ↗
37. S.H.C. Park, Y.S. Sato, H. Kokawa: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 987–9410.1007/s11661-003-0228-4 ↗