journal article·2007-04

Eta Phase and Boride Formation in Directionally Solidified Ni-Base Superalloy IN792 + Hf

S.M. Seo, I.S. Kim, J.H. Lee, C.Y. Jo, H. Miyahara, K. Ogi

Publisher page

Abstract

A series of directional solidification experiments have been conducted to elucidate the formation mechanism of eta and Cr-rich phases in the Ni-base superalloy IN792 + Hf. Both eta and Cr-rich phases were found to be the final solidification products developed from the remaining liquid after γ/γ′ eutectic reaction. The (Ti + Ta + Hf)/Al ratio in the residual liquid played a significant role in the nucleation of eta phase. During the solidification of γ/γ′ eutectic, the continual increase of (Ti + Ta + Hf)/Al ratio in the residual liquid eventually led to the completion of γ/γ′ eutectic reaction and caused the nucleation of eta phase. The results of electron probe microanalysis and transmission electron microscopy revealed that the Cr-rich phase was Cr, Mo, and W containing M5B3 and M3B2 type borides. The formation of these boride phases was found to be strongly influenced by the formation of γ/γ′ eutectic. Because of the limited solubility of Cr, Mo, and W in γ′ phase, these elements were enriched in the residual liquid during the solidification of γ/γ′ eutectic. In addition, boron would preferentially segregate into liquid due to its very limited solubility in both γ and γ′ phases so that the possibility of boride formation in the residual liquid ahead of the γ/γ′ eutectic was increased. A modified Scheil model was adopted to explain the influence of solidification rate on the formation of eta phase and borides, and the results were discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. M. Konter, M. Thumann: J. Mater. Proc. Technol., 2001, vol. 117, pp. 386–9010.1016/S0924-0136(01)00785-3 ↗
2. R. Burgel, J. Grossmann, O. Lusebrink, H. Mughrabi, F. Pyczak, R.F. Singer, and A. Volek: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 25–3410.7449/2004/Superalloys_2004_25_34 ↗
3. Y. Murata, R. Hashizume, A. Yoshinari, N. Aoki, M. Morinaga, and Y. Fukui: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S.L. Olson and J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 285–9410.7449/2000/Superalloys_2000_285_294 ↗
4. B.G. Choi, I.S. Kim, D.H. Kim, S.M. Seo, and C.Y. Jo: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 163–7110.7449/2004/Superalloys_2004_163_171 ↗
5. G.K. Bouse: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 163–7210.7449/1996/Superalloys_1996_163_172 ↗
6. W.R. Sun, J.H. Lee, S.M. Seo, S.J. Choe, and Z.Q. Hu: Mater. Sci. Technol., 1999, vol. 15, pp. 1221–24.10.1179/026708399101505220 ↗
7. D. Ma, and P.R. Sahm: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1113–19.10.1007/s11661-998-0303-y ↗
8. Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, H. Okamoto, P.R. Subramanian and L. Kacprzak, eds., ASM, Metals Park, Ohio, 1990, vol. 1, pp. 508–10 and 866–67
9. O.A. Ojo, N.L. Richards, and M.C. Chaturvedi: Scripta Mater., 2004, vol. 51, pp. 683–88.10.1016/j.scriptamat.2004.06.013 ↗
10. W.R. Sun, J.H. Lee, S.M. Seo, S.J. Choe, and Z.Q. Hu: Mater. Sci. Eng. A, 1999, vol. 271, pp. 143–49.10.1016/S0921-5093(99)00189-6 ↗
11. Y. Zhu, S. Zhang, L. Xu, J. Bi, Z.Q. Hu, and C.X. Shi: in Superalloys 1988, D.N. Duhl, G. Maurer, S. Antolovich, C. Lund and S. Reichman, eds., TMS, Warrendale, PA, 1988, pp. 703–12
12. E.W. Loss and C.T. Sims: in Superalloys II, C.T. Sims, N.S. Stoloff and W.C. Hagel, eds., Wiley, New York, NY, 1986, pp. 97–133 and 432
13. Y. Zhu, S. Zhang, T. Zhang, J. Zhang, Z.Q. Hu, X. Xie, and C. Shi: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger and D.L. Klarstrom, eds., TMS, Warrendale, PA, 1992, pp. 145–5410.7449/1992/Superalloys_1992_145_154 ↗
14. S.M. Seo, I.S. Kim, J.H. Lee, C.Y. Jo, and K. Ogi: J. Kor. Inst. Met. Mater., 2006, vol. 44, pp. 44–54
15. L. Zheng: Scripta Mater., 2005, vol. 53, pp. 943–4810.1016/j.scriptamat.2005.06.021 ↗
16. R.M. Kearsey, J.C. Beddoes, P. Jones, and P. Au: Intermetallics, 2004, vol. 12, pp. 903–1010.1016/j.intermet.2004.02.041 ↗
17. S.M. Seo, D.H. Ye, I.S. Kim, and C.Y. Jo: J. Kor. Inst. Met. Mater., 2002, vol. 40, pp. 1259–70
18. X. Lin, and T.M. Yue: Mater. Sci. Eng. A, 2005, vol. 402, pp. 294–30610.1016/j.msea.2005.05.024 ↗
19. Z. Yunrong, W. Yuping, X. Jizhou, P. Caron, and T. Khan: in Superalloys 1988, D.N. Duhl, G. Maurer, S. Antolovich, C. Lund and S. Reichman, eds., TMS, Warrendale, PA, 1988, pp. 335–4410.7449/1988/Superalloys_1988_335_344 ↗
20. N.P. Wikstrom, O.A. Ojo, and M.C. Chaturvedi: Mater. Sci. Eng. A, 2006, vol. 417, pp. 299–30610.1016/j.msea.2005.10.056 ↗
21. H.D. Brody, and M.C. Flemings: Trans. TMS-AIME, 1966, vol. 236, pp. 615–24
22. E. Scheil: Z. Metallkd., 1942, vol. 34, pp. 70–75
23. R.A. Swalin, and A. Martin: Trans. AIME, 1956, vol. 206, pp. 567–72
24. S.M. Seo, Y.S. Na, I.S. Kim, and C.Y Jo: Proc. 1st Kor.-Jpn. Conf. for Young Foundry Engineers, S. Lee, K. Ogi and T. Nam, eds., Hanrimwon, Seoul, Korea, 2003, pp. 89–91
25. T.W. Clyne, and W. Kurz: Metall. Trans. A, 1981, vol. 12A, pp. 965–7110.1007/BF02643477 ↗
26. R. Vincent: Acta Metall., 1985, vol. 33, pp. 1205–1610.1016/0001-6160(85)90231-7 ↗