Brass-type shear bands and their influence on texture formation
Source abstract
Abstract
The issues of brass-type shear band formation and the evolution of band microtexture components are addressed. The analysis is based on bands developed by plane strain compression in twinned {112}〈111〉 oriented copper single crystals deformed at 77 K. Substantial progress in understanding the formation of the bands was possible thanks to systematic local orientation measurements using transmission electron microscopy (TEM). The TEM orientation maps allowed investigation of the way in which unstable behavior of twin-matrix layers leads to the brass-type shear bands. It has been found that several important transitions of the deformation textures are correlated with shear banding. Early stages of shear band formation are the result of the equally effective operation of two coplanar slip systems on the {111} slip planes. This process leads to the lattice rotation about the 〈110〉 axis and to the rise of Goss orientation. For well-developed shear bands, a second rotation about the 〈112〉 direction is observed. It is accompanied by activation of new slip systems. The observed disappearance of matrix components from the shear band microtexture is the result of twinning within reoriented matrix lamellae. In the twin-oriented areas, the dominance of one of two coplanar slip systems ultimately leads to the formation of the brass texture component.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. R.E. Smallman and D. Green: Acta Metall., 1964, vol. 12, pp. 145–54.10.1016/0001-6160(64)90182-8 ↗
2. W.Y. Yeung and B.J. Duggan: Mater. Sci. Technol., 1986, vol. 2, pp. 552–58.10.1179/mst.1986.2.6.552 ↗
3. C. Donadille, R. Valle, P. Dervin, and R. Penelle: Acta Metall., 1989, vol. 32, pp. 1547–71.10.1016/0001-6160(89)90123-5 ↗
4. C.S. Lee and B.J. Duggan: Mater. Sci. Technol., 1994, vol. 10, pp. 155–61.10.1179/mst.1994.10.2.155 ↗
5. M. Blicharski and S. Gorczyca: Met. Sci., 1978, vol. 12, pp. 303–12.10.1016/0036-9748(78)90118-7 ↗
6. E. El-Danaf, S.R. Kalidindi, R.D. Doherty, and C. Necker: Acta Mater., 2000, vol. 48, pp. 2665–73.10.1016/S1359-6454(00)00050-1 ↗
7. W.B. Hutchinson, B.J. Duggan, and M. Hatherly: Met. Technol., 1979, vol. 6, pp. 398–403.10.1179/030716979803276598 ↗
8. B.J. Duggan, M. Hatherly, W.B. Hutchinson, and P.T. Wakefield: Met. Sci., 1978, vol. 12, pp. 343–51.10.1016/0036-9748(78)90116-3 ↗
9. C.S. Da Costa Viana, J.C. Parades, A.L. Pinto, and A.M. Lopez: Proc. 12th Int. Conf. on Textures of Materials, Toronto, 1999, J.A. Szpunar, ed., pp. 671–76.
10. H. Paul, J.H. Driver, and Z. Jasieński: Acta Mater., 2002, vol. 50, pp. 815–30.10.1016/S1359-6454(01)00381-0 ↗
11. H. Paul and J.H. Driver: Mem. Sci. Rev. Metall., 2003, vol. 11, pp. 871–82.10.1051/metal:2003204 ↗
12. H. Paul, J.H. Driver, C. Maurice, and Z. Jasieśnki: Acta Mater., 2002, vol. 50, pp. 4339–55.10.1016/S1359-6454(02)00266-5 ↗
13. J. Gill Sevillano, P. Van Houtte, and E. Aernoudt: Scripta Metall., 1977, vol. 11, pp. 581–86.10.1016/0036-9748(77)90113-2 ↗
14. G. Wasserman: Z. Metallkd., 1963, vol. 54, pp. 61–65.
15. Z. Jasieński, H. Paul, A. Piątkowski, and A. Litwora: J. Mater. Proc. Technol., 1995, vol. 53, pp. 187–94.10.1016/0924-0136(95)01975-K ↗
16. Y. Nakayama and K. Morii: Trans. Jpn. Inst. Met., 1982, vol. 23, pp. 422–31.10.2320/matertrans1960.23.422 ↗
17. G.D. Köhlhoff, A.S. Malin, K. Lücke, and M. Hatherly: Acta Metall., 1988, vol. 36, pp. 2841–47.10.1016/0001-6160(88)90130-7 ↗
18. J. Hirsch, K. Lücke, and M. Hatherly: Acta Metall., 1988, vol. 36, pp. 2905–27.10.1016/0001-6160(88)90174-5 ↗
19. J.R. Hirsch: Mater. Sci. Technol., 1990, vol. 6, pp. 1048–57.10.1179/mst.1990.6.11.1048 ↗
20. J. Hirsch and K. Lücke: Acta Metall., 1988, vol. 36, pp. 2863–82.10.1016/0001-6160(88)90172-1 ↗
21. K. Morii, H. Mecking, and Y. Nakayama: Acta Metall., 1985, vol. 33, pp. 379–86.10.1016/0001-6160(85)90080-X ↗
22. H. Paul: Praca Habilitacyjna, Instytut Metalurgii i Inzynierii Materialowej PAN, Kraków, 2002, pp. 1–131 (in Polish).
23. H. Paul, J.H. Driver, C. Maurice, and Z. Jasieński: Mater. Sci. Eng., 2003, vol. 359A, pp. 178–91.10.1016/S0921-5093(03)00335-6 ↗
24. G.D. Köhlhoff, X. Sun, and K. Lücke: Proc. 8th Int. Conf. on Textures of Materials, Santa Fe, NM, 1987, J.S. Kallend and G. Gottstein, eds., TMS, Warrendale, PA, 1987, pp. 183–88.
25. A. Morawiec, J.J. Fundenberger, E. Bouzy, and J.S. Lecomte: J. Appl. Cryst., 2002, vol. 35, p. 287.10.1107/S002188980200417X ↗
26. A. Morawiec: J. Appl. Cryst., 1999, vol. 32, pp. 788–98.10.1107/S002188989900549X ↗
27. P. Wagner, O. Engler, and K. Lücke: Acta Metall. Mater., 1995, vol. 43, pp. 3799–3812.10.1016/0956-7151(95)90164-7 ↗
28. A. Korbel, J.D. Embury, M. Hatherly, P.L. Martin, and H.W. Erbsloh: Acta Metall., 1986, vol. 34, pp. 1999–2009.10.1016/0001-6160(86)90259-2 ↗
29. K. Morii and Y. Nakayama: Trans. Jpn. Inst. Met., 1981, vol. 22, pp. 857–64.10.2320/matertrans1960.22.857 ↗
30. Z. Jasieński, T. Baudin, A. Piątkowski, and R. Penelle: Scripta Mater., 1996, vol. 35, pp. 397–403.10.1016/1359-6462(96)00159-5 ↗
31. J.H. Driver, H. Paul, J.-C. Glez, and C. Maurice: Proc. 21st Risø Int. Symp. on Materials Science, RISØ National Laboratory, Roskilde, Denmark 2000, N. Hansen, X. Huang, D. Juul Jensen, E.M. Lauridsen, T. Leffers, W. Pantleon, T.J. Sabin, and J.A. Wert, eds., pp. 35–48.
32. T. Leffers, R.J. Asaro, J.H. Driver, U.F. Kocks, H. Mecking, C. Tomé, and P. Van Houtte: Proc. 8th Int. Conf. on Textures of Materials, J.S. Kallend and G. Gottstein, eds., Santa Fe, NM, 1987, TMS, Warrendale, PA, 1987, pp. 265–72.
33. B. Fargette and D. Whitwham: Mem. Sci. Rev. Metall., 1976, vol. 73, pp. 197–206.
34. J. Grewen, T. Noda, and D. Sauer: Z. Metallkd., 1977, vol. 68, pp. 260–65.
35. W.Y. Yeung, J. Hirsch, and M. Hatherly: Proc. 8th Int. Conf. on Textures of Materials, Santa Fe, NM, 1987, J.S. Kallend and G. Gottstein, eds., TMS, Warrendale, PA, 1987, pp. 467–72.
36. C.S. Lee and B.J. Duggan: Mater. Sci. Technol., 1994, vol. 10, pp. 155–61.10.1179/mst.1994.10.2.155 ↗