Aging behavior of the Ti-29Nb-13Ta-4.6Zr new beta alloy for medical implants
Source abstract
Abstract
The aging behavior of the Ti-29Nb-13Ta-4.6Zr alloy quenched from 1033 K was investigated by employing electrical resistivity (ρ) and Vickers hardness (HV) measurements, optical microscopy (OM), and X-ray diffraction (XRD). Upon aging at 573 K, the ρ value at room- and liquid-nitrogen temperatures initially increased to 120 and 30 ks, respectively, and decreased with continued aging time. The HV value started to increase from 0.06 ks and the isothermal ω phase was identified at 300 ks of aging by XRD. On aging at 773 K, an incubation period of 6 ks was observed for the ρ change at both temperatures, following which ρ decreased. An incubation period for the HV change was extended up to 12 ks, and then HV increased. Precipitated α was observed and identified by OM and XRD, respectively, whereas no reflections of isothermal ω phase were identified during the whole aging time at 773 K. The upper-limit temperature of isothermal ω precipitation is situated at around 673 K.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. U. Zwicker, K. Buhler, and R. Muller: in Titanium ’80 Science and Technology, H. Kimura and O. Izumi, eds., AIME, New York, NY, 1980, pp. 505–14.
2. M.J. Donachie, Jr.: Titanium; A Technical Guide, ASM INTERNATIONAL, Metals Park, OH, 1988, pp. 1–19.
3. P.J. Bania: Beta Titanium Alloys in the 1990’S, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA, 1993, pp. 3–14.
4. M. Niinomi: Structural Biomaterials for the 21st Century, M. Niinomi, T. Okabe, E.M. Taleff, D.R. Lesure, and H.E. Lippard, eds., TMS, Warrendale, PA, 2001, pp. 3–14.
5. Y. Okazaki, Y. Ito, K. Kyo, and T. Tateishi: Mater. Sci. Eng., 1996, vol. A213, pp. 138–47.10.1016/0921-5093(96)10247-1 ↗
6. D.P. Perl and A.R. Brody: Science, 1980, vol. 208, pp. 297–08.10.1126/science.7367858 ↗
7. S.G. Steinemann: in Evaluation of Biomaterials, D. Winter, J.L. Leray, and K. de Groot, eds., John Wiley, New York, NY, 1980, pp. 1–34.
8. T. Ahmed, M. Long, J. Silvetri, C. Ruiz, and H.J. Rack: in Titanium ’95: Science and Technology, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., Institute of Metals, London, 1996, pp. 1760–67.
9. A.K. Mishra, J.A. Davidson, P. Kovacs, and R.A. Poggie: in Beta Titanium Alloys in the 1990’s, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA, 1993, pp. 61–72.
10. K. Wang, L. Gustavson, and J. Dumbleton: in Beta Titanium Alloys in the 1990’s, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA, 1993, pp. 49–60.
11. M. Morinaga, N. Yukawa, T. Maya, K. Sona, and H. Adachi: Proc. 6th World Conf. on Titanium, P. Lacombe, R. Tricot, and G. Béranger, eds., Les Éditions de Physique, Les Ulis Cedex, France, 1989, pp. 1601–06.
12. D. Kuroda, M. Niinomi, M. Morinaga, Y. Kato, and T. Yashiro: Mater. Sci. Eng., 1998, vol. A243, pp. 244–49.10.1016/S0921-5093(97)00808-3 ↗
13. D. Kuroda, M. Niinomi, K. Fukunaga, H. Fukui, Y. Kato, and A. Suzuki: CAMP-ISIJ, 1999, vol. 12, p. 1378.
14. P.J. Bania, G.A. Lenning, and J.A. Ball: Beta Titanium Alloys in the 1980’s, R.R. Boyer and H.W. Rosenberg, eds., AIME, Warrendale, PA, 1984, pp. 209–29.
15. R.R. Boyer and H.W. Rosenberg: Beta Titanium Alloys in the 1980’s, R.R. Boyer and H.W. Rosenberg, eds., AIME, Warrendale, PA, 1984, pp. 441–56.
16. Seitai-zairyou “Biomaterials”, Japan Society of Mechanical Engineers, Ohm Sya, Tokyo, 1993, pp. 129–30 (in Japanese).
17. F.R. Brotzen, E.L. Harmon, Jr., and A.R. Troiano: Trans. AIME, 1955, vol. 203, pp. 413–19.
18. W.J. Brammer, Jr. and C.G. Rhodes: Phil. Mag., 1967, vol. 16, pp. 477–86.10.1080/14786436708220858 ↗
19. D. Kramer and C.G. Rhodes: Trans. TMS-AIME, 1967, vol. 236, pp. 1612–15.
20. M.J. Blackburn and J.C. Williams: Trans. TMS-AIME, 1968, vol. 242, pp. 2461–69.
21. B.S. Hickman: Trans. TMS-AIME, 1969, vol. 245, pp. 1329–36.
22. B.S. Hickman: J. Inst. Met., 1968, vol. 96, pp. 330–37.
23. B.A. Hatt and V.G. Rivlin: Br. J. Appl. Phys., 1968, vol. 1, pp. 1145–49.
24. G.H. Narayanan and T.F. Archbold: Br. J. Appl. Phys., 1970, vol. 1, pp. 2281–90.
25. J.C. Williams, B.S. Hickman, and D.H. Leslie: Br. J. Appl. Phys., 1971, vol. 2, pp. 477–84.
26. A.T. Balcerzak and S.L. Sass: Br. J. Appl. Phys., 1972, vol. 3, pp. 1601–05.
27. V. Chandrasekaran, R. Taggart, and D.H. Polonis: Metallography, 1972, vol. 5, pp. 393–98.10.1016/0026-0800(72)90027-4 ↗
28. V. Chandrasekaran, R. Taggart, and D.H. Polonis: J. Mater. Sci., 1974, vol. 9, pp. 961–68.10.1007/BF00570390 ↗
29. R. Davis, H.M. Flower, and D.R.F. West: Acta Metall., 1979, vol. 27, pp. 1041–52.10.1016/0001-6160(79)90192-5 ↗
30. T. Khaled, G.H. Narayanan, and S.M. Copley: Metall. Trans. A, 1978, vol. 9A, pp. 1883–90.10.1007/BF02663423 ↗
31. T.J. Headley and H.J. Rack: Metall. Trans. A, 1979, vol. 10A, pp. 909–20.10.1007/BF02658310 ↗
32. F.H. Froes, C.F. Yolton, J.M. Capenso, M.G.H. Wells, and J.C. Williams: Metall. Trans. A, 1980, vol. 11A, pp. 21–31.10.1007/BF02700435 ↗
33. C. Hayman and W.W. Gerberich: Metall. Trans. A, 1985, vol. 16A, pp. 187–95.10.1007/BF02816045 ↗
34. D.L. Moffat and D.C. Larbalestier: Metall. Trans. A, 1988, vol. 19A, pp. 1687–94.10.1007/BF02645136 ↗
35. M. Niinomi: Toyohashi University of Technology, Toyohashi, private communication, 2001.
36. P. Wilkes: Acta Metall., 1968, vol. 16, pp. 863–66.10.1016/0001-6160(68)90106-5 ↗
37. T. Yukawa, S. Ohtani, T. Nishimura, and T. Sakai: Proc. 1st Int. Conf. on Titanium, R.I. Jaffee and N.E. Promisel, eds., Pergamon Press, Oxford, United Kingdom, 1970, pp. 699–710.
38. N. Niwa, T. Demura, and K. Ito: Iron Steel Inst. Jpn. Int., 1990, vol. 30, pp. 773–79.10.2355/isijinternational.30.773 ↗
39. E.W. Collings: in Materials Properties Handbook: Titanium Alloys, R.R. Boyer, G. Welsch, and E.W. Collings, ASMINTERNATIONAL, Materials Park, OH, 1994, pp. 5–48.