Solidification of Iron-Rich Intermetallic Phases in Al-4.5Cu-0.3Fe Cast Alloy
Source abstract
Abstract
The iron-rich intermetallics in A206 type cast aluminum alloy (Al-4.5Cu-0.3Fe) were investigated using thermal analysis, interrupted quenching testing, and differential scanning calorimetry (DSC). An optical microscope with image analysis and scanning electron microscopy were used to identify and quantify the iron-rich intermetallics. Basically, two kinds of iron-rich intermetallics, Chinese script Al15(FeMn)3(SiCu)2 (α-Fe) and platelet Al7Cu2(FeMn) or Al7Cu2Fe (β-Fe), are found in the final microstructures of the A206 cast alloys. All the possible solidification reactions, precipitation temperatures, and nucleation mechanisms for the iron-rich phases were investigated systematically. It is found that both α-Fe and β-Fe phases can precipitate on the oxide films. The α-Fe can also nucleate on Al6(FeMnCu) and Al3Ti particles. In addition, the previously formed α-Fe phase is also favorable for the nucleation of the β-Fe phase formed subsequently. These nucleation events were not only observed metallographically but also supported by the calculated planar disregistries. A possible nucleation hierarchy has been suggested.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. M.L. Philbin: Diecasting ‘96: A Status Report, Modern Casting, AFS, Schaumburg, IL, 1996, pp. 30-33.
2. J.H. Wang, D.Q. Yi, Y. Cao, K.H. Cheng, H.W. Liu, B. Wang, B. Lu, and S. Liu: IJMMME, 2001, vol. 25, no. 12, pp. 8-15.
3. K. Yu, S.R. Li, and W.X. Li: Rare Metal Mat. Eng., 2000, vol. 29, no. 3, pp.177-81.
4. N.P. Lyakishev: Phase Diagrams of Binary Metallic Systems, vol. 1, Mashinostroenie, Moscow, Russia, 1996, pp. 144-48.
5. L. Lu and A.K. Dahle: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 819-35.
6. A.M. Samuel, A. Pennorst, C. Villeneuvet, F. H. Samuel, H.W. Doty, and S. Valtierra: Int. J. Cast Metals Res, 2000, vol. 13, pp. 231-53.10.1080/13640461.2000.11819406 ↗
7. G. Gustafsson, T. Thorvaldsson, and G.L. Dunlop: Metall. Trans. A., 1986, vol. 17A, pp. 45-52.10.1007/BF02644441 ↗
8. S. Murali and K.S.S. Murthy: Mater. Charact., 1994, vol. 33, pp. 99-112.10.1016/1044-5803(94)90072-8 ↗
9. A.M. Samuel, F.H. Samuel, and H.W. Doty: J. Mater. Sci., 1996, vol. 31, pp. 5529-39.10.1007/BF01159327 ↗
10. W. Khalifa, F.H. Samuel, J.E. Gruzleski, H.W. Doty, and S. Valtierra: Metall. Mater. Trans. A, 2005, vol. 36A, pp.1017-32.10.1007/s11661-005-0295-9 ↗
11. J.Y. Hwang, H.W. Doty, and M.J. Kaufman: Mater. Sci. Eng. A, 2008, vol. 488, pp. 496-504.10.1016/j.msea.2007.12.026 ↗
12. S.G. Shabestari: Mater. Sci. Eng. A, 2008, vol. 383, pp. 289-98.10.1016/S0921-5093(04)00832-9 ↗
13. M.D. Cameron, A.T. John, and K.D. Arne: Scripta Mater., 2005, vol. 53, pp. 955-8.10.1016/j.scriptamat.2005.06.028 ↗
14. N. Roy, A.M. Samuel, and F.H. Samuel: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 415-29.10.1007/BF02648419 ↗
15. G.K. Sigworth: Mod. Cast., 1987, vol. 77, pp. 23-5.
16. X. Cao and J. Campbell: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1425-35.10.1007/s11661-004-0251-0 ↗
17. X. Cao and J. Campbell: Mater. Trans., 2006, vol. 47, no. 5, pp. 1303-12.10.2320/matertrans.47.1303 ↗
18. X. Cao and J. Campbell: Can. Metall. Q., 2005, vol. 44, no. 4, pp. 435-48.10.1179/cmq.2005.44.4.435 ↗
19. D.N. Miller, L. Lu, and A.K. Dahle: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 873-8.10.1007/BF02735008 ↗
20. The Aluminum Association: Designations and Chemical Composition Limits for Aluminum Alloys in the Form of Castings and Ingot, Washington, DC, 2006.
21. L. Backerud, G. Chai, and J. Tamminen: Solidification Characteristics of Aluminum Alloys, AFS, Akanaluminium, Stockholm, Sweden, 1990.
22. M.A. Talamantes-Silva, A. Rodriguez, J. Talamantes-Silva, S. Valtierra, and R. Colas: Mater. Charact., 2008, vol. 59, pp. 1434-9.10.1016/j.matchar.2008.01.005 ↗
23. C.J. Tseng, S.L. Lee, S.C. Tsai, and C.J. Cheng: J. Mater. Res., 2002, vol. 17, pp. 2243-50.10.1557/JMR.2002.0330 ↗
24. C.J. Tseng, S.L. Lee, T.F. Wu, and J.C. Lin: JIM, 2000, vol. 10, pp.708-13.
25. G.K. Sigworth: Final Report of AMD 305, 2002, pp. 20–25.10.1023/A:1017387203302 ↗
26. P. Ashtari, H. Tezuka, and T. Sato: Mater. Trans., 2003, vol. 44, pp. 2611-16.10.2320/matertrans.44.2611 ↗
27. S. Belmares-Perales, M. Castro-Roman, M. Herrera-Trejo, and L.E. Ramirez-Vidaurri: Met. Mater. Int. 2008, vol. 14, pp. 307-14.10.3365/met.mat.2008.06.307 ↗
28. L.A. Narayanan, F.H, Samuel, and J.E. Gruzleski: Metall. Trans. A, 1994, vol. 25A, pp. 1761-73.10.1007/BF02668540 ↗
29. N.A. Belov, A.A. Aksenov, and D.G. Eskin: Iron in Aluminum Alloys-Impurity and Alloying Elements, Taylor & Francis, London, U.K., 2002.10.1201/9781482265019 ↗
30. B.L. Bramfitt: Metall. Trans., 1970, pp. 1987–95.10.1007/BF02642799 ↗
31. J. Campbell: Casting, Butterworth-Heinemann, Oxford, U.K., 1991.
32. X. Cao and J. Campbell: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1409-20.10.1007/s11661-003-0253-3 ↗