journal article·2011-03Open access

Low-Temperature Toughening Mechanism in Thermomechanically Processed High-Strength Low-Alloy Steels

Byoungchul Hwang, Chang Gil Lee, Sung-Joon Kim

Abstract

High-strength low-alloy (HSLA) steels were fabricated by varying thermomechanical processing conditions such as rolling and cooling conditions in the intercritical region, and the low-temperature toughening mechanism was investigated in terms of microstructure and the associated grain boundary characteristics. The steels acceleratedly cooled to relatively higher temperature had lower tensile strength than those acceleratedly cooled to room temperature due to the increased volume fraction of granular bainite or polygonal ferrite (PF) irrespective of rolling in the intercritical region, while the yield strength was dependent on intercritical rolling, and start and finish cooling temperatures, which affected the formation of PF and low-temperature transformation phases. The steel rolled in the intercritical region and cooled to 673 K (400 °C) provided the best combination of high yield strength and excellent low-temperature toughness because of the presence of fine PF and appropriate mixture of various low-temperature transformation phases such as granular bainite, degenerate upper bainite (DUB), lower bainite (LB), and lath martensite (LM). Despite the high yield strength, the improvement of low-temperature toughness could be explained by the reduction of overall effective grain size based on the electron backscattered diffraction (EBSD) analysis data, leading to the decrease in ductile-to-brittle transition temperature (DBTT).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. D.B. Lillig, B.D. Newbury BD, and S.A. Altstadt: Proc. 19th Int. Offshore and Polar Eng. Conf., ISOPE, Osaka, Japan, 2009, pp. 1–10.
2. Y. Mizutani, K. Ishibashi, K. Yoshii, Y. Watanabe, R. Chijiwa, and Y. Yoshida: Nippon Steel Techn. Rep., 2004, vol. 90, pp. 45–52.
3. A.T. Davenport: Formable HSLA and Dual Phase Steels, AIME, New York, NY, 1979.
4. N.J. Kim and G. Thomas: Metall. Trans. A, 1981, vol. 12A, pp. 483–89.10.1007/BF02648546 ↗
5. J. Koo, M.J. Luton, N.V. Bangaru, R.A. Petkovic, D.P. Fairchild, C.W. Petersen, H. Asahi, T. Hara, Y. Terada, M. Sugiyama, H. Tamehiro, Y. Komizo. S. Okaguchi, M. Hamada, A. Yamamoto, and I. Takeuchi: Int. J. Offshore Polar Eng., 2004, vol. 14, pp. 2–10.
6. I. Tamura, H. Sekine, T. Tanaka, and C. Ouchi: Thermomechanical Processing of High-Strength Low-Alloy Steels, Butterworth & Co. Ltd., London, 1988.
7. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 1997.
8. US Patent Pub. No. 20070193666.
9. B.L. Bramfitt and J.G. Speer: Metall. Trans. A, 1990, vol. 21A, pp. 817–29.10.1007/BF02656565 ↗
10. G. Krauss and S.W. Thompson: ISIJ Int., 1995, vol. 35, pp. 937–45.10.2355/isijinternational.35.937 ↗
11. T. Hayashi, F. Kawabata, and K. Amano: Proc. Materials Solution ‘97 on Accelerated Cooling/Direct Quenching Steels, ASM, Materials Park, OH, 1997, pp. 93–99.
12. Y.M. Kim, H. Lee, and N.J. Kim: Mater. Sci. Eng. A, 2008, vol. 478, pp. 361–70.10.1016/j.msea.2007.06.035 ↗
13. B. Hwang, Y.G. Kim, S. Lee, Y.M. Kim, N.J. Kim, and J.Y. Yoo: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2107–14.10.1007/s11661-005-0331-9 ↗
14. P.-H. Chang and A.G. Preban: Acta Metall., 1985, vol. 33, pp. 897–903.10.1016/0001-6160(85)90114-2 ↗
15. V. Schwinn, P. Fluess, A. Liessem, and J. Schroeder: Proc. 18th Int. Offshore and Polar Eng. Conf., ISOPE, Vancouver, Canada, 2008, pp. 27–32.
16. F.B. Pickering: Proc. Symp. on Transformation and Hardenability in Steels, Climax Molybdenum Co., Ann Arbor, MI, 1967, pp. 109–29.
17. P. Brozzo, G. Buzzichelli, A. Mascanzoni, and M. Mirabile: Met. Sci., 1977, vol. 11, pp. 123–29.10.1016/0036-9748(77)90290-3 ↗
18. Y. Ohmori, H. Ohtani, and T. Kunitake: Met. Sci., 1974, vol. 8, pp. 357–66.10.1016/0036-9748(74)90138-0 ↗
19. J.H. Chen, Y. Kikuta, T. Araki, M. Yoneda, and Y. Matsuda: Acta Metall., 1984, vol. 32, pp. 1779–88.10.1016/0001-6160(84)90234-7 ↗
20. B. Hwang, S. Lee, Y.M. Kim, N.J. Kim, and J.Y. Yoo: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1793–1805.10.1007/s11661-005-0043-1 ↗
21. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279–88.10.1016/j.actamat.2005.11.001 ↗
22. S. Morito, X, Huang, T. Furuhara, T. Maki, and N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323–31.10.1016/j.actamat.2006.07.009 ↗
23. T. Furuhara, S. Morito, and T. Maki: Proc. 1st Int. Symp. on Steel Science, ISIJ, Kyoto, Japan, 2007, pp. 51–56.
24. Y.M. Kim, S.K. Kim, Y.J. Lim, and N.J. Kim: ISIJ Int., 2002, vol. 42, pp. 1571–77.10.2355/isijinternational.42.1571 ↗
25. B. Hwang, Y.M. Kim, S. Lee, N.J. Kim, and S.S. Ahn: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 725–39.10.1007/s11661-005-1004-4 ↗