journal article·2000-08

The influence of crystallographic texture and interstitial impurities on the mechanical behavior of zirconium

G. C. Kaschner, G. T. Gray

Publisher page

Abstract

Development of physically based constitutive models capable of simultaneously describing slip, twinning, and anisotropy requires knowledge of the coincident influence of each on mechanical response. In this article, the influence of interstitial impurities and texture on twinning in zirconium (Zr), in addition to variations in strain rate and temperature, are examined, to probe their effects on substructure evolution and mechanical behavior. The compressive-yield responses of both high-purity (HP) crystal-bar and lower-purity (LP) zirconium were found to depend on the loading orientation relative to the c-axis of the hcp cell, the applied strain rate, which varied between 0.001 and 3500/s, and the test temperature, which varied between 77 and 298 K. The rate of strain hardening in zirconium was seen to depend on the controlling defect-storage mechanism as a function of texture, strain rate, and temperature. The substructure evolution of HP zirconium was also observed to be a function of the applied strain rate and test temperature. The substructure of HP zirconium was seen to display a greater incidence of deformation twinning when deformed at a high strain rate at 298 K or quasi-statically at 77 K.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Nuclear Materials and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. R.E. Reed-Hill: in Deformation Twinning, R.E. Reed-Hill, J.P. Hirth, and H.C. Rogers, eds., TMS, Warrendale, PA, 1964, vol. 25, pp. 295–320.
2. P.G. Partridge: Metall. Rev., 1967, vol. 12, pp. 169–94.10.1179/imr.1967.12.1.169 ↗
3. E. Tenckhoff: Deformation Mechanisms, Texture, and Anisotropy in Zirconium and Zircalloy, ASTM, Philadelphia, PA, 1988, pp. 3–34.
4. E.J. Rapperport: Acta Metall., 1959, vol. 7, pp. 254–60.10.1016/0001-6160(59)90018-5 ↗
5. S.G. Song and G.T. Gray III: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2665–76.10.1007/BF02669423 ↗
6. U.F. Kocks, C.N. Tome, and H.R. Wenk: Texture and Anisotropy, Cambridge University Press, Cambridge, United Kingdom, 1988, pp. 178–239.
7. W.F. Hosford: The Mechanics of Crystals and Textured Polycrystals, Oxford University Press, New York, NY, 1993, pp. 172–85.
8. H. Conrad: Progr. Mater. Sci., 1981, vol. 26, pp. 123–403.10.1016/0079-6425(81)90001-3 ↗
9. J.W. Christian and S. Mahajan: Progr. Mater. Sci., 1995, vol. 39, pp. 1–157.10.1016/0079-6425(94)00007-7 ↗
10. A. Serra, D.J. Bacon, and R.C. Pond: Acta Metall., 1988, vol. 36, pp. 3183–3203.10.1016/0001-6160(88)90054-5 ↗
11. M. Biget and G. Saada: J. Phys. III, 1995, vol. 5, pp. 1833–40.10.1051/jp3:1995219 ↗
12. G.T. Gray III: in ASM Volume 8—Mechanical Testing, ASM INTER-NATIONAL, Materials Park, OH, 2000, in press.
13. S.G. Song and G.T. Gray III: Acta Metall. Mater., 1995, vol. 43, pp. 2339–50.10.1016/0956-7151(94)00434-X ↗
14. S.R. Chen and G.T. Gray III: J. Phys. IV, 1997, pp. 741–46.
15. G.T. Gray III: in Twinning in Advanced Materials, M.H. Yoo and M. Wuttig, eds., TMS, Warrendale, PA, 1993, pp. 337–49.
16. P.J. Maudlin, G.T. Gray III, C.M. Cady, and G.C. Kaschner: Phil. Trans. R. Soc. London A, 1999, vol. 357, pp. 1707–29.10.1098/rsta.1999.0397 ↗
17. G.T. Gray III, G.C. Kaschner, T.A. Mason, P.J. Maudlin, and S.R. Chen: in Advances in Twinning, S. Ankem and C.S. Pande, eds., TMS, San Diego, CA, 1999, pp. 157–70.
18. G.T. Gray: J. Phys. IV, 1997, vol. 7, pp. 423–28.10.1051/jp1:1997101 ↗