journal article·2009-06

Effect of Aluminum Content on Plasma-Nitrided Al x CoCrCuFeNi High-Entropy Alloys

Wei-Yeh Tang, Jien-Wei Yeh

Publisher page

Abstract

High-entropy alloys (HEAs) Al x CoCrCuFeNi with different aluminum contents (x = 0 to 1.8) were plasma nitrided at 525 °C for 45 hours with an aim to develop wear-resistant structural parts. The nitrided layer comprises a well-nitrided dendrite phase and an un-nitrided Cu-rich interdendrite phase. Surface hardening is a result of the formation of various nitrides in the nitrided dendrite: CrN, Fe4N, and AlN. With increasing aluminum content, the hardness of the nitrided layer increases due to the increased amount of hard AlN phase and the increased volume fraction of bcc phase being harder than the fcc one. The nitrided layer thickness shows an apparent decrease with the increasing aluminum content of the alloy. The present alloy system provides a wide range of substrate hardness from Hv 170 to 560 before nitriding, which even becomes harder by around Hv 30 after nitriding. For Al0.5CoCrCuFeNi alloy having the highest surface hardness of Hv 1300, a layer thickness of 23 μm, and a substrate hardness of Hv 300, an adhesive wear test confirms its superior wear resistance as being 17 times that of the un-nitrided samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Handbook Committee: ASM Handbook, 10th ed., ASM INTERNATIONAL, Metals Park, OH, 1991, vol. 4, pp. 257–461.
2. A.M. Staines and T. Bell: Thin Solid Films, 1981, vol. 86, pp. 201–11.10.1016/0040-6090(81)90289-3 ↗
3. Y. Sun and T. Bell: Mater. Sci. Eng. A, 1991, vol. 140, pp. 419–34.10.1016/0921-5093(91)90458-Y ↗
4. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, and S.Y. Chang: Adv. Eng. Mater., 2004, vol. 6, pp. 299–303.10.1002/adem.200300567 ↗
5. P.K. Huang, J.W. Yeh, T.T. Shun, and S.K. Chen: Adv. Eng. Mater., 2004, vol. 6, pp. 74–78.10.1002/adem.200300507 ↗
6. J.W. Yeh: Ann. Chim.-Sci. Mater., 2006, vol. 31, pp. 633–48.10.3166/acsm.31.633-648 ↗
7. C.Y. Hsu, J.W. Yeh, S.K. Chen, and T.T. Shun: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1465–69.10.1007/s11661-004-0254-x ↗
8. C.J. Tong, Y.L. Chen, S.K. Chen, J.W. Yeh, T.T. Shun, C.H. Tsau, S.J. Lin, and S.Y. Chang: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 881–93.10.1007/s11661-005-0283-0 ↗
9. C.J. Tong, M.R. Chen, S.K. Chen, J.W. Yeh, T.T. Shun, S.J. Lin, and S.Y. Chang: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1263–71.10.1007/s11661-005-0218-9 ↗
10. J.M. Wu, S.J. Lin, J.W. Yeh, S.K. Chen, Y.S. Huang, and H.C. Chen: Wear, 2006, vol. 261, pp. 513–19.10.1016/j.wear.2005.12.008 ↗
11. F.R. Boer, R. Boom, W.C.M. Mattens, A.R. Miedema, and A.K. Niessen: Cohesion in Metals, North–Holland, Amsterdam, 1988.
12. Handbook Committee: ASM Handbook, 10th ed., ASM INTERNATIONAL, Metals Park, OH, 1991, vol. 4, pp. 263–64.
13. K.-E. Thelning: Steel and Its Heat Treatment: Bofors Handbook, Butterworth and Co., London, 1975, pp. 395–97.
14. G.Y. Ke, S.K. Chen, T. Hsu, and J.W. Yeh: Ann. Chim.-Sci. Mater., 2006, vol. 31, pp. 669–84.10.3166/acsm.31.669-684 ↗
15. A. Wells and I. Le R. Strydom: Surf. Eng., 1988, vol. 4, pp. 55–59.10.1179/sur.1988.4.1.55 ↗
16. Y. Sun: J. Alloy. Compd., 2003, vol. 351, pp. 241–47.10.1016/S0925-8388(02)01034-4 ↗
17. Handbook Committee: ASM Handbook, 10th ed., ASM INTERNATIONAL, Metals Park, OH, 1991, vol. 4, pp. 387–409.
18. Handbook Committee: ASM Handbook, 10th ed., ASM INTERNATIONAL, Metals Park, OH, 1991, vol. 4, pp. 437–47.