Economical and Environmental Factors in Light Alloys Automotive Applications
Source abstract
Abstract
The effects of mass reduction through substitution of ferrous components by equivalent Al or Mg alloy components on the vehicle's cost and CO2 emissions are discussed using M.F. Ashby's penalty functions and exchange constants method. The viability of substitutions of At alloys by Mg alloys is also considered. Substitutions of cast components at equal volume and panels and beams at constant stiffness are considered. Substitutions of cast ferrous components are economically the only viable ones in terms of the CAFE (Corporate Average Fuel Economy) liability, although the cost penalty can be fully offset by the gasoline savings over the life of the car for most other forms of light alloy substitutions. When primary alloys are used, the gasoline savings over the lifetime of a lighter car offset the CO2 footprint of Al alloys in all cases. Because of their larger CO2 footprint, the environmental feasibility is somewhat restricted for electrolytic Mg, and more so for Mg produced by the Pidgeon process. Due to their high recyclability, Al casting alloys have a significant environmental advantage over all other light alloy applications. Viable substitutions of existing Al components by Mg components are largely restricted to castings of electrolytic Mg.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Material Selection and Properties · Corrosion Behavior and Inhibition · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (87)
Show source-provided references
1. F. Stodolsky, A. Vyas, R. Cuenca, and L. Gaines: 1995 Total Life Cycle Conf. Expo., Vienna, Austria, http://www.transportation.anl.gov/pdfs/TA/106.pdf, 1995
2. European Aluminium Association: Lightweight Potential of an Aluminium Intensive Vehicle, 2002, http://www.eaa.net/home.jsp?content=aam/index.htm, accessed on July 28, 2006
3. A.A. Luo: Magnesium Technology, Nashville, TN, 2000, H.I. Kaplan, J. Hryn, and B. Clow, eds., TMS, Warrendale, PA, 2000, pp. 89–98
4. E. Aghion, B. Bronfin, H. Friederich, and Z. Rubinovich: Magnesium Technology 2004, A. Luo, ed., Charlotte, NC, 2004, TMS, Warrendale, PA, 2004, pp. 167–72
5. R.L. Edgar: Magnesium Alloys and Their Applications, Munich, 2000, K.U. Kainer, ed., Wiley-VCH, New York, NY, 2000, pp. 324–29
6. L.K. Sivertsen, J.O. Haagensen, and D. Albright: SAE Trans., Technical Paper 2003–01–0641, SAE, Warrendale, PA, 2003, pp. 275–81
7. J.G. Mezoff: in Magnesium in Automobiles, B. Clow, ed., SAE, Warrendale, PA, 1992, SP-932, pp. 1–14
8. B.R. Powell, L.J. Ouimet, J.E. Allison, J.A. Hines, R.S. Beals, L. Kopka, and P.P. Ried: in Magnesium for Automotive Components, T. Ruden and T. Padfield, ed., SAE, Warrendale, PA, 2004, SP-1845, pp. 59–68
9. G. Simonds and B. Su: 63rd Annual World Magnesium Conf., Beijing, 2006, International Magnesium Association, Wauconda, IL, 2006, pp. 66–72
10. S. Schumann: Mater. Sci. Forum, 2004, 488–489:1–8
11. J.A. Carpenter Jr.: Mater. Sci. Forum, 2004, 488–489:17–20
12. J.A. Carpenter, Jr., J. Jackman, N. Li, R.J. Osborne, B.R. Powell, and P. Sklad: 63rd Annual World Magnesium Conf., Beijing, 2006, International Magnesium Association, Wauconda, IL, 2006, pp. 100–19
13. 9th Int. Conf. on Aluminium Alloys (ICAA-9), Brisbane, 2004, J. Hirsch, J.F. Nie, A.J. Morton, and B.C. Muddle, ed., Institute of Materials Engineering Australasia, North Melbourne, Vic., 2004, pp. 15–23
14. M.P. Thomas, A.H. Wirtz: Resources, Conserv. Recycl., 1994, 10:193–20410.1016/0921-3449(94)90053-1 ↗
15. K. Johnson: Adv. Mater. Processes, 2002, 160:62–65
16. S.K. Das: JOM, 2003, Nov., pp. 22–2610.1007/s11837-003-0204-x ↗
17. R.E. Brown: 4th Int. Symp. on Recycling of Metals and Engineered Materials, D.L. Stewart, J.C. Daley, and R.L. Stephens, eds., TMS, Warrendale, PA, 2000, pp. 809–22
18. M.E. Henstock: The Recycling of Non-Ferrous Metals, ICME, Ottawa, 1996
19. W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler, A. Vieregge: Mater. Sci. Eng. A, 2000, 280:37–4910.1016/S0921-5093(99)00653-X ↗
20. S. Tartaglia: “Magnesium Diecastings,” Australian Automotive Technology Centre, Preston, Vic., 1994
21. D. Carle, G. Blount: Mater. Des., 1999, 20: 267–7210.1016/S0261-3069(99)00003-5 ↗
22. U.S. Congress: Energy Policy Conservation Act, 1975, http://www.ita.doc.gov/td/auto/cafe.html, accessed on Oct. 20, 2005
23. F. Field, R. Kirchain, J. Clark: J. Indust. Ecol., 2001, 4:71–9110.1162/108819800569816 ↗
24. “International Aluminium Institute: Life Cycle Inventory of the Worldwide Aluminium Industry with Regard to Energy Consumption and Emissions of Greenhouse Gases. Part 1—Automotive, 2000” http://www.world-aluminum.org/iai/publications/, accessed on Apr. 22, 2005
25. N.C. Cochran: Automot. Eng., 1973, 81:57–61
26. P. Koltun, A. Tharumarajah, and S. Ramakrishnan: Magnesium Technology 2005, N.R. Neelameggham, H.I. Kaplan, and B.R. Powell, eds., San Francisco, CA, 2205, TMS, Warrendale, PA, 2005, pp. 43–48
27. D.M. Moore: Alcan Inc., Environmental and Life Cycle Benefits of Automotive Aluminum, 2001, www.alcan.com, accessed on Feb. 1, 2006
28. D. Shen, A. Phips, and G. Keoleian: SAE Trans., Technical Paper 1999–01–0016, SAE, Warrendale, PA, 1999, pp. 17–25
29. M.F. Ashby: Acta Mater., 2000, 48:359–6910.1016/S1359-6454(99)00304-3 ↗
30. P. Sirisalee, M.F. Ashby, G.T. Parks, P.J. Clarkson: Adv. Eng. Mater., 2004, 6:84–9210.1002/adem.200300554 ↗
31. P.M. Weaver, M.F. Ashby, S. Burgess, N. Shibaike: Mater. Des., 1996, 17:11–1710.1016/0261-3069(96)00024-6 ↗
32. D. Albright, J.O. Haagensen: IMA 54: Magnesium Trends, Int. Magnesium Conf., Toronto, 1997, International Magnesium Association, McLean, VA, 1997, pp. 32–37
33. S. Ramakrishnan and P. Koltun: Magnesium Technology 2004, Charlotte, NC, 2004, A. Luo, ed., TMS, Warrendale, PA, 2004, pp. 173–78
34. J. Bohme: 61st Annual World Magnesium Conf., New Orleans, LA, 2004, International Magnesium Association, Washington, DC, 2004, pp. 71–79
35. J. Wolf and W. Wagener: 62nd Annual World Magnesium Conf., Berlin, 2005, International Magnesium Association, Washington, DC, 2005, pp. 59–66
36. H. Dorsam: Magnesium Alloys and Their Applications, Munich, 2000, K.U. Kainer, ed., Wiley-VCH, New York, NY, 2000, pp. 725–38
37. Y. Tzabari and I. Reich: Magnesium 2000 (2nd Israeli Int. Conf. on Magnesium Science and Technology), Dead Sea, 2000, E. Aghion and D. Eliezer, eds., MRI, Beer-Sheva, 2000, pp. 35–42
38. R. Ramsden: Mod. Casting, 2006, 96:26–29
39. M.F. Ashby: Materials Selection in Mechanical Design, Butterworth-Heinemann, Oxford, United Kingdom, 2005
40. D. Weiss, S.T. Robison: Mod. Casting, 2005, 95:26–29
41. P. Beggs, D. Byrnes: Mater. Austr., 2001, 33:15–18
42. M.B. Tessieri and G.K. Ng: 3rd Int. Symp., Recycling of Metals and Engineered Materials, Point Clear, AL, 1995, P.B. Queneau and R.D. Peterson, eds., TMS, Warrendale, PA, 1995, pp. 713–27
43. O. Schauerte: in Titanium and Titanium Alloys: Fundamentals and Applications, C. Leyens, M. Peters, eds., Wiley-VCH, Weinheim, 2003, pp. 467–8210.1002/3527602119.ch18 ↗
44. Mater . Aus., 2006, vol. 39, pp. 16–17, www.azom.com10.1017/S0278221900606673 ↗
45. K.-H. von Zengen: Mater. Sci. Forum, 2006, 519–521:1201–0810.4028/www.scientific.net/MSF.519-521.1201 ↗
46. P. Reppe, G. Keoleian, R. Messik, and C. Costic: SAE Trans., Technical Paper 980470, 1998, SAE, Warrendale, PA, pp. 369–77
47. I. Ongstad, O. Haugerud, and G. Mezzetta: Int. Symp. on Advances in Production and Fabrication of Light Metals and Metal Matrix Composites, Edmonton, AB, Canada, Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Quebec, 1992, pp. 232–44
48. Granta Design Ltd., CES Selector Vr. 4.6.1, 2006, http://www.grantadesign.com/
49. D.A. Kramer: Mineral Industry Surveys, U.S. Geological Survey, 2005, http://minerals.usgs.gov/minerals/pubs/commodity/magnesium/mgmis1q05.xls, accessed on June 23, 2005
50. American Metal Market Daily: Free Market Price Guide, 2005, www.amm.com, accessed on June 14, 2005
51. N. Fantetti: 63rd Annual World Magnesium Conf., Beijing, 2006, International Magnesium Association, Wauconda, IL, 2006, pp. 19–23
52. H. Xu, S. Xie, and D. Xia: 63rd Annual World Magnesium Conf., Beijing, 2006, International Magnesium Association, Wauconda, IL, 2006, pp. 120–25
53. S. Ramakrishnan, P. Koltun: Resources, Conserv. Recycl., 2004, 42: 49–6410.1016/j.resconrec.2004.02.003 ↗
54. L. Holloway: Mater. Des., 1998, 19:133–4310.1016/S0261-3069(98)00031-4 ↗
55. U.G.K. Wegst and M.F. Ashby: http://www-mech.eng.cam.ac.uk/cms/publ/papers/env1.pdf, accessed on Sept. 20, 2006.
56. ODNR: Recycling in Ohio, 2005, http://www.dnr.state.oh.us/recycling/awareness/facts/aluminum.htm, accessed on Oct. 24, 2005
57. C. Hunt: Aus. J. Environ. Manag., Australia’s Greenhouse Policy, 2004, http://colinhunt.zenburger.com/australiangreenhouse.html, accessed on June 28, 2005
58. N.S. Ermolaeva, M.B.G. Castro, P.V. Kandachar: Mater. Des., 2004, 25:689–9810.1016/j.matdes.2004.02.021 ↗
59. J. Davis: in Magnesium in Automobiles, B. Clow, ed., SAE, Warrendale, PA, 1992, SP-932, pp. 71–85
60. R. Eberle and H.A. Franze: SAE Trans., Technical Paper 982179, SAE, Warrendale, PA, 1998, vol. 107, pp. 1998–2007
61. K. Buxmann: Resources, Conserv. Recycl., 1994, 10:17–2310.1016/0921-3449(94)90034-5 ↗
62. K. Buxmann and J. Gediga: SAE Trans., Technical Paper 982176, SAE, Warrendale, PA, 1998, vol. 107, pp. 1977–82
63. AAA: American Automobile Association, http://www.fuelgaugereport.com/, accessed on Jan. 29, 2007
64. C. Bae and N. Trumbul: Transportation and Climate Change, Center for Climate Change and Environmental Forecasting, U.S. Department of Transportation, 2005, http://courses.washington.edu/gmforum/topics/trans_climate/trans_climate.htm, accessed on June 15, 2005
65. W.J. Korchinski: Reason Foundation, Fueling America: How Hydrogen Cars Affect the Environment, 2004, http://www.reason.org/energy/, accessed on Feb. 2, 2006
66. E. Henstock: Conserv. Recycl., 1976, 1:3–1710.1016/0361-3658(76)90003-5 ↗
67. A.L. Craigil, J.C. Powell: Resources, Conserv. Recycl., 1996, 17:75–9610.1016/0921-3449(96)01105-6 ↗
68. P.A. Plunkert: Aluminium Recycling in the United States in 2000, 2005, U.S. Geological Survey, http://www.usgs.gov/pubprod, accessed on Oct. 20, 200510.3133/ofr20051051 ↗
69. C.L. Kusik and C.B. Kenahan: “Energy Use Patterns for Metal Recycling,” Report to United States Bureau of Mines, U.S. Department of the Interior, Bureau of Mines, Washington, DC, 1978
70. M.B. Bever: Conserv. Recycl., 1976, 1:137–4710.1016/0361-3658(76)90013-8 ↗
71. G. Hoyle: Resources, Conserv. Recycl., 1995, 15:181–9110.1016/0921-3449(95)00022-4 ↗
72. G. Hanko and G. Macher: Magnesium Technology 2003, San Diego, CA, 2003, H.I. Kaplan, ed., TMS, Warrendale, PA, 2003, pp. 29–32
73. A. Javaid, E. Essadiqui, S. Bell, and B. Davis: Magnesium Technology 2006, San Antonio, TX, A.A. Luo, N.R. Neelameggham, and R.S. Beals, eds., TMS, Warrendale, PA, 2006, pp. 7–12
74. S.F. Sibley, W.C. Butterman: Resources, Conserv. Recycl., 1995, 15:259–26710.1016/0921-3449(95)00037-2 ↗
75. S.K. Das: Light Met. Age 2006, 64:26–32
76. S. Valtierra: Nemak Pty., Monterrey, Mexico, personal communication, 2005
77. H. Antrekowitsch, G. Hanko, and P. Ebner: in Magnesium Technology 2002, Seattle, WA, H.I. Kaplan, ed., TMS, Warrendale, PA, 2002, pp. 29–32
78. D.A. Kramer: USGS, Magnesium, Its Alloys and Compounds, 2000, http://pubs.usgs.gov/of/2001/of01-341/of01-341.pdf, accessed on Aug. 10, 2006
79. M.P. Thomas: Innovation in Technology—Its Importance and Role within Novelis, 2006, www.icaa10.ca, accessed on Aug. 4, 2006
80. A. Nayak: Business and Technology Innovation in the Global Aluminum Industry, 2006, www.icaa10.ca, accessed on Aug. 4, 2006
81. S.P. Cashion and N.J. Ricketts: 6th Int. Conf. Magnesium Alloys and Their Applications, Wolfsburg, Germany, 2003, K.U. Kainer, ed., DGM, Wiley-VCH, New York, NY, 2003, pp. 995–100010.1002/3527603565.ch154 ↗
82. N.J. Ricketts and S.P. Cashion: Magnesium Technology 2001, New Orleans, LA, J. Hryn, ed., TMS, Warrendale, PA, 2001, pp. 31–36
83. A. Karger, F.-W. Bach, Pelz: Mater. Sci. Forum, 2004, 488–489:85–88
84. T. Yamashita and K. Shimizu: 63rd Annual World Magnesium Conf., Beijing, International Magnesium Association, Wauconda, IL, 2006, pp. 169–78
85. D.B. Spencer: JOM on-line (TMS), The High-Speed Identification and Sorting of Nonferrous Scrap, 2005, http://www.tms.org/pubs/journals/JOM/0504/Spencer/Spencer-0504.html, accessed on Feb. 6, 2006
86. P.H. Sattler: 3rd Int. Symp., Recycling of Metals and Engineered Materials, Point Clear, AL, P.B. Queneau and R.D. Peterson, eds., TMS, Warrendale, PA, 1995, pp. 57–64
87. AMC: Australian Magnesium Corporation, Inquiry into the Regulatory Arrangements for Trading in Greenhouse Gas Emissions, http://www.aph.gov.au/house/committee/environ/greenhse/gasrpt/Sub65-dk.pdf, accessed on Aug. 10, 2006