journal article·2013-06Open access

Transmission Electron Microscopy Analysis of Yielding in Ultrafine-Grained Medium Mn Transformation-Induced Plasticity Steel

Bruno C. De Cooman, Paul Gibbs, Seawoong Lee, David K. Matlock

Abstract

The microstructural changes occurring during yielding of ultrafine-grained medium Mn transformation-induced plasticity steel intercritically annealed at 873 K and 923 K (600 °C and 650 °C) were analyzed by transmission electron microscopy. The tensile properties and the work hardening behavior of the 7 wt pct Mn steel were found to have a pronounced dependence on the intercritical annealing temperature. A low intercritical annealing temperature of 873 K (600 °C) resulted in a martensite-free ultrafine-grained two-phase microstructure consisting of ferrite and austenite. After annealing at 923 K (650 °C), the ultrafine microstructure contained ferrite, low stability retained austenite, and athermal martensite. Yielding of the steel annealed at 873 K (600 °C) was associated with the initiation and propagation of Luders deformation bands, whereas yielding of the steel annealed at 923 K (650 °C) was initiated at a lower tensile stress by stress-induced austenite transformation. The progression of the martensite transformation during yielding strongly suggests that the yielding and strain hardening of ultrafine-grained medium Mn transformation-induced steel are controlled by the stability of the ultrafine-grained austenite phase. Suppression of plastic flow localization is achieved when the UFG steel has an initially high rate of strain hardening resulting from transformation-initiated yielding.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. D.K. Matlock, J.G. Speer, E. De Moor, and P.J. Gibbs: Proc. 1st Int. Conf. High Manganese Steels, HMnS2011, Y.K. Lee, ed., Yonsei University, Seoul, 2011, pp. 1–15.
2. D.K. Matlock and J.G. Speer: Microstructure and Texture in Steels, Springer, New York, 2009, pp. 185–205.10.1007/978-1-84882-454-6_11 ↗
3. E. De Moor, P. J. Gibbs, J. G. Speer, D. K. Matlock, and J. G. Schroth, AIST Transactions, vol. 7, no. 3, 2010, pp. 133–144.
4. P. J. Gibbs, E. De Moor, M. J. Merwin, B. Clausen, J. G. Speer, and D. K. Matlock, Metall. Mater. Trans. A, A42, 2011, pp. 3691–3702.10.1007/s11661-011-0687-y ↗
5. B.C. De Cooman, K. Chin, and J. Kim: in Trends and Developments in Automotive Engineering, Iva Lipovic, ed., Intech Publishers, Austria, 2011.
6. B.C. De Cooman: in Phase Transformations in Steels, D.V. Edmonds and E. Pereloma, eds., Woodhead Publishing, UK, 2012.
7. B.C. De Cooman, O. Kwon, and K.-G. Chin: Mater. Sci. Technol., vol. 28 (5), 2012, pp. 513–27.10.1179/1743284711Y.0000000095 ↗
8. R.L. Miller, Metall. Trans., 2, 1972, 905-912.10.1007/BF02647665 ↗
9. M.J. Merwin: Proc. 2007 Mater. Sci. & Technol. Conf., Detroit, MI, 2007, 515–36.
10. J.M. Jang, S.J. Kim, N.H. Kang, K.M. Cho, D.W. Suh, Met. Mater. Int., 15, 2009, 909-16.10.1007/s12540-009-0909-7 ↗
11. D.W. Suh, S.J. Park, T.H. Lee TH, C.S. Oh, and S.J. Kim: Metall. Mater. Trans. A, vol. 41A, 2010, pp. 397–408.10.1007/s11661-009-0124-7 ↗
12. S.W. Lee, S.J. Lee, B.C. De Cooman, Scripta Materialia, 65, 2011, 225-228.10.1016/j.scriptamat.2011.04.010 ↗
13. S.J. Lee, S.W. Lee, B.C. De Cooman, Scripta Materialia, 64, 2011, 649-652.10.1016/j.scriptamat.2010.12.012 ↗
14. S.W. Lee, S.J. Lee, B.C. De Cooman, Acta Materialia, 59, 2011, 7546-7553.10.1016/j.actamat.2011.08.030 ↗
15. S.W. Lee, S.J. Lee, S.S. Kumar, K.Y. Lee, B. C. De Cooman, Metall. Mater. Trans. A, 42A, 2011, 3638-3651.10.1007/s11661-011-0636-9 ↗
16. A. Saeed-Akbari, J. Imlau, U. Prahl, W. Bleck, Metall. Mater. Trans. A, 40A, 2009, 3076-3090.10.1007/s11661-009-0050-8 ↗
17. J.K. Kim, B.C. De Cooman, Metall. Mater. Trans. A, 42A, 2011, 932-936.10.1007/s11661-011-0610-6 ↗
18. J.K. Kim, S.J. Lee, B.C. De Cooman, Scripta Materialia, 65, 2011, 363-366.10.1016/j.scriptamat.2011.05.014 ↗
19. L.E. Murr, K.P. Staudhammer, S.S. Hecker, Metall. Trans. A, 13A, 1982, 627-635.10.1007/BF02644428 ↗