On Macrosegregation
Source abstract
Abstract
Macrosegregations, namely compositional inhomogeneities at a scale much larger than the microstructure, are typically classified according to their metallurgical appearance. In ingot castings, they are known as ‘A’ and ‘V’ segregation, negative cone segregation, and positive secondary pipe segregation. There exists ‘inverse’ segregation at casting surfaces and ‘centerline’ segregation in continuously cast slabs and blooms. Macrosegregation forms if a relative motion between the solute-enriched or -depleted melt and dendritic solid structures occurs. It is known that there are four basic mechanisms for the occurrence of macrosegregation. In the recent years, the numerical description of the combination of these mechanisms has become possible and so a tool has emerged which can be effectively used to get a deeper understanding into the process details which are responsible for the formation of the above-mentioned different macrosegregation appearances. Based on the most sophisticated numerical models, we consequently associate the four basic formation mechanisms with the physical phenomena happening during (i) DC-casting of copper-based alloys, (ii) DC-casting of aluminum-based alloys, (iii) continuous casting of steel, and (iv) ingot casting of steel.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: nanoparticles nucleation surface interactions · Solidification and crystal growth phenomena · Fluid Dynamics and Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. W. Kurz and D.J. Fisher: Fundamental of Solidification, 4th ed., Trans. Tech. Publ., Aedermansdorf, 1998.
2. J.A. Dantzig and M. Rappaz: Solidification, EPFL, London, 2009.10.1201/9781439808030 ↗
3. R. Nadella, D.G. Eskin, Q. Du, and L. Katgerman: Prog. Mater. Sci., 2008, vol. 53, pp. 421–80.10.1016/j.pmatsci.2007.10.001 ↗
4. J.S. Kirkaldy and W.V. Youdelis: Trans. Metall. Soc. AIME, 1958, vol. 212, pp. 833–40.
5. M.C. Flemings and G.E. Nereo: Trans. Metall. Soc. AIME, 1967, vol. 239, pp. 1449–61.
6. M.C. Flemings, R. Mehrabian, and G.E.Nereo: Trans. Metall. Soc. AIME, 1968, vol. 242, pp. 41–49.
7. M.C. Flemings and G.E. Nereo: Trans. Metall. Soc. AIME, 1968, vol. 242, pp. 50–55.
8. C. Beckermann: Flemings Symp. Boston, MA, 2000.
9. G.H. Gulliver: Metallic Alloys, Griffin, 1922.
10. E. Scheil: Zeitschrift Für Met., 1942, vol. 34, pp. 70–72.
11. H.D. Brody and M.C. Flemings: Trans. Metall. Soc. AIME, 1966, vol. 236, p. 615.
12. T.W. Clyne and W. Kurz: Metall. Trans. A, 1981, vol. 12, p. 965.10.1007/BF02643477 ↗
13. A. Roosz: Personal Communication, 2014.
14. N.B. Vaughan: Journal, Inst. Met., 1937, vol. 61, p. 35.
15. M. Gruber-Pretzler, F. Mayer, M. Wu, A. Ludwig, J. Riedle, and U. Hofmann: in 6th Int. Copper-Cobre Conf., (Cu2007), Vol 1, Toronto, 2007, pp. 265–79.
16. A. Ludwig, M. Gruber-Pretzler, M. Wu, A. Kuhn, and J. Riedle: Fluid Dyn. Mater. Process., 2005, vol. 1, pp. 285–300.
17. M. Gruber-Pretzler, F. Mayer, M. Wu, A. Ludwig, H.A. Kuhn, and J. Riedle: in 6th Int. Conf. Model. Cast. Weld. Adv. Solidif. Process. (MCWASP VI), C.A. Gandin and M. Bellet, eds., TMS Publication, Warrendale, 2006, pp. 799–806.
18. A. Ludwig, M. Gruber-Pretzler, F. Mayer, A. Ishmurzin, and M. Wu: Mater. Sci. Eng. A, 2005, vol. 413-4, pp. 485–89.10.1016/j.msea.2005.09.012 ↗
19. A. Ishmurzin, M. Gruber-Pretzler, F. Mayer, M. Wu, and A. Ludwig: Int. J. Mater. Res., 2008, vol. 99, pp. 618–25.10.3139/146.101682 ↗
20. J. Hao, M. Grasser, M. Wu, and A. Ludwig: Adv. Mater. Res., 2011, vol. 155, pp. 1401–4.
21. J. Hao, M. Grasser, M. Wu, A. Ludwig, J. Riedle, and R. Eberle: IOP Conf. Ser. Mater. Sci. Eng., 2012, vol. 27, p. 012015.10.1088/1757-899X/27/1/012015 ↗
22. D.G. Eskin, J. Zuidema, V.I. Savran, and L. Katgerman: Mater. Sci. Eng. A, 2004, vol. 384, pp. 232–44.10.1016/j.msea.2004.05.066 ↗
23. Q. Du, D.G. Eskin, and L. Katgerman: Mater. Sci. Eng. A, 2005, vol. 413-414, pp. 144–50.10.1016/j.msea.2005.08.176 ↗
24. R. Nadella, D.G. Eskin, and L. Katgerman: Metall. Mater. Trans. A, 2007, vol. 39, pp. 450–61.
25. D.G. Eskin, Q. Du, and L. Katgerman: Metall. Mater. Trans. A, 2008, vol. 39, pp. 1206–12.10.1007/s11661-008-9468-7 ↗
26. K. Miyazawa and K. Schwerdtfeger: Arch. Eisenhüttenwes., 1981, vol. 52, pp. 415–22.10.1002/srin.198104599 ↗
27. T Kajitani, J Drezet, and M Rappaz: Metall. Mater. Trans. A, 2001, vol. 32, pp. 1479–91.10.1007/s11661-001-0236-1 ↗
28. V. Fachinotti, S. Le Corre, N. Triolet, M. Bobadilla, and M. Bellet: Int. J. Numer. Methods Eng., 2006, vol. 67, pp. 1341–84.10.1002/nme.1664 ↗
29. M. Bellet: in 9th Int. Conf. Numer. Methods Ind. Form. Process., J.M.A. Cesar de Sa and A.D. Santos, eds., American Institute of Physics, Porto, 2007, pp. 1369–74.
30. F. Mayer, L. Könözsy, M. Wu, and A. Ludwig: in 2nd Int. Conf. Simul. Model. Met. Process. Steelmak. (STEELSIM 2007), A. Ludwig, ed., ASMET, Graz, 2007, pp. 265–70.
31. F. Mayer, M. Wu, and A. Ludwig: in 12th Int. Conf. Model. Cast. Welding, Adv. Solidif. Process. (MWASP XII), S.L. Cockcroft and D.M. Maijer, eds., TMS Publication, Vancouver, 2009, pp. 279–86.
32. F. Mayer, M. Wu, and A. Ludwig: Steel Res. Int., 2010, vol. 81, pp. 660–67.10.1002/srin.201000122 ↗
33. M. Wu, J. Domitner, and A. Ludwig: Metall. Mater. Trans. A, 2012, vol. 43, pp. 945–64.10.1007/s11661-011-0940-4 ↗
34. J. Domitner, M. Wu, F. Mayer, A. Ludwig, B. Kaufmann, J. Reiter, and T. Schaden: in Eur. Contin. Cast. Conf. (ECCC 2011), Düsseldorf, 2011, pp. S6.1–S6.8.
35. M. Wu, J. Domitner, F. Mayer, and A. Ludwig: in 4th. Int. Conf. Simul. Model. Met. Process. Steelmak. (STEELSIM 2011), 2011, pp. 1–11.
36. J. Domitner, M. Wu, A. Kharicha, A. Ludwig, B. Kaufmann, J. Reiter, and T. Schaden: Metall. Mater. Trans. A, 2013, vol. 45, pp. 1415–34.
37. J. Domitner, M. Wu, and A. Ludwig: Steel Res. Int., 2014, vol. 85, pp. 1–5.10.1002/srin.201470001 ↗
38. Iron R: J. Iron Steel Inst., 1926, vol. 113, pp. 39–176.
39. A. Hultgren: J. Iron Steel Inst., 1929, vol. 120, pp. 69–125.
40. E. Marburg: J. Met., 1953, vol. 5, pp. 157–72.
41. B. Gray: J. Iron Steel Inst., 1956, vol. 182, pp. 366–74.
42. C. Roques, P. Martin, Ch. Dubois, and P. Bastien: Rev. Met., 1960, vol. 57, pp. 1091–1103.10.1051/metal/196057121091 ↗
43. M.C. Flemings: Metall. Trans., 1974, vol. 5, pp. 2121–34.10.1007/BF02643923 ↗
44. M.C. Flemings: Scand. J. Met., 1976, vol. 5, pp. 1–15.
45. A. Hultgren: Scand. J. Met., 1973, vol. 2, pp. 217–27.
46. G. Ebneth, W. Haumann, K. Rüttiger, and F. Oeters: Arch. Eisenhüttenwes., 1974, vol. 45, pp. 353–59.10.1002/srin.197403890 ↗
47. Y-K. Chuang and K. Schwerdtfeger: Arch. Eisenhüttenwes., 1975, vol. 46, pp. 303–10.10.1002/srin.197503632 ↗
48. H.W. den Hartog, J.M. Rabenberg, and R. Pesch: Met. Soc. B., 1975, vol. 158, pp. 200–212.
49. H. Fredriksson and O. Nilsson: Met. Trans. B, 1978, vol. 9, pp. 111–20.10.1007/BF02822678 ↗
50. J. Campbell: Castings, 2nd ed., Butterworth, Amsterdam, 1991.
51. R. Mehrabian and M.C. Flemings: Metall. Trans. B, 1970, vol. 1, pp. 455–64.10.1007/BF02811556 ↗
52. T. Fujii, D.R. Poirier, and M.C. Flemings: Met. Trans. B, 1979, vol. 10, pp. 331–39.10.1007/BF02652503 ↗
53. M. Wu, A. Ludwig, A. Bührig-Polaczek, M. Fehlbier, and P. Sahm: Int. J. Heat Mass Transf., 2003, vol. 46, pp. 2819–32.10.1016/S0017-9310(03)00054-1 ↗
54. P. Rouxa, B. Goyeau, D. Gobin, F. Fichot, and M. Quintard: Int. J. Heat Mass Transf., 2006, vol. 49, pp. 4496–4510.10.1016/j.ijheatmasstransfer.2006.05.020 ↗
55. M.C. Schneider and C. Beckermann: Metall. Mater. Trans. A, 1995, vol. 26, pp. 2373–88.10.1007/BF02671251 ↗
56. J. P. Gu and C. Beckermann: Metall. Mater. Trans. A, 1999, vol. 30, pp. 1357–66.10.1007/s11661-999-0284-5 ↗
57. H. Combeau, M. Založnik, S. Hans, and P.E. Richy: Metall. Mater. Trans. B, 2009, vol. 40, pp. 289–304.10.1007/s11663-008-9178-y ↗
58. M. Zaloznik and H. Combeau: Int. J. Therm. Sci., 2010, vol. 49, pp. 1500–1509.10.1016/j.ijthermalsci.2010.04.011 ↗
59. M. Wu and A. Ludwig: Metall. Mater. Trans. A, 2006, vol. 37, pp. 1613–31.10.1007/s11661-006-0104-0 ↗
60. M. Wu and A. Ludwig: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1465–75.10.1007/s11661-007-9175-9 ↗
61. J. Li, M. Wu, A. Ludwig, and A. Kharicha: Int. J. Heat Mass Transf., 2014, vol. 72, pp. 668–79.10.1016/j.ijheatmasstransfer.2013.08.079 ↗
62. G. Lesoult: Mater. Sci. Eng. A, 2005, vol. 413-414, pp. 19–29.10.1016/j.msea.2005.08.203 ↗
63. K. Suzuki and T. Miyamoto: Trans. Iron Steel Inst. Jpn., 1978, vol. 18, pp. 80–89.10.2355/isijinternational1966.18.80 ↗
64. K. Suzuki and T. Miyamoto: Trans. Iron Steel Inst. Jpn., 1980, vol. 20, pp. 375–83.10.2355/isijinternational1966.20.375 ↗
65. J.J. Moore and N.A. Shah: Int. Met. Rev., 1983, vol. 28, pp. 338–56.10.1179/imr.1983.28.1.336 ↗
66. A. Ludwig, A. Kharicha, and M. Wu: Metall. Mater. Trans. B, 2014, vol. 45, pp. 36–43.10.1007/s11663-013-9820-1 ↗