journal article·2018-06

Microstructural Evolutions During Reversion Annealing of Cold-Rolled AISI 316 Austenitic Stainless Steel

Meysam Naghizadeh, Hamed Mirzadeh

Publisher page

Abstract

Microstructural evolutions during reversion annealing of a plastically deformed AISI 316 stainless steel were investigated and three distinct stages were identified: the reversion of strain-induced martensite to austenite, the primary recrystallization of the retained austenite, and the grain growth process. It was found that the slow kinetics of recrystallization at lower annealing temperatures inhibit the formation of an equiaxed microstructure and might effectively impair the usefulness of this thermomechanical treatment for the objective of grain refinement. By comparing the behavior of AISI 316 and 304 alloys, it was found that the mentioned slow kinetics is related to the retardation effect of solute Mo in the former alloy. At high reversion annealing temperature, however, an equiaxed austenitic microstructure was achieved quickly in AISI 316 stainless steel due to the temperature dependency of retardation effect of molybdenum, which allowed the process of recrystallization to happen easily. Conclusively, this work can shed some light on the issues of this efficient grain refining approach for microstructural control of austenitic stainless steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. C.Y. Lee, C.S. Yoo, A. Kermanpur, and Y.K. Lee: J. Alloy Compd., 2014, vol. 583, pp. 357-360.10.1016/j.jallcom.2013.08.161 ↗
2. M. Calmunger, G. Chai, R. Eriksson, S. Johansson, and J.J. Moverare: Metall. Mater. Trans. A, 2017, vol. 48, pp. 4525-4538.10.1007/s11661-017-4212-9 ↗
3. G. Cios, T. Tokarski, A. Żywczak, R. Dziurka, M. Stępień, Ł. Gondek, M. Marciszko, B. Pawłowski, K. Wieczerzak, and P. Bała: Metall. Mater. Trans. A, 2017, vol. 48, pp. 4999-5008.10.1007/s11661-017-4228-1 ↗
4. S.S. SatheeshKumar, M. Vasanth, VajinderSingh, P. Ghosal, and T. Raghu: J. Alloy. Compd., 2017, vol. 699, pp. 1036-1048.10.1016/j.jallcom.2016.12.321 ↗
5. L. Deibler, A. Brown, and J. Puskar: Metallogr. Microstruct. Anal., 2017, vol. 6, pp. 3-11.10.1007/s13632-017-0335-z ↗
6. M. Naghizadeh and H. Mirzadeh: Metall. Mater. Trans. A, 2016, vol. 47, pp. 4210-4216.10.1007/s11661-016-3589-1 ↗
7. H. Mirzadeh, J.M. Cabrera, A. Najafizadeh, and P.R. Calvillo: Mater. Sci. Eng. A, 2012, vol. 538, pp. 236-245.10.1016/j.msea.2012.01.037 ↗
8. C.X. Huang, W.P. Hu, Q.Y. Wang, C. Wang, G. Yang, and Y.T. Zhu: Mater. Res. Lett., 2015, vol. 3, pp. 88-94.10.1080/21663831.2014.968680 ↗
9. F. Bottoli, G. Winther, T.L. Christiansen, K. Vinter Dahl, and M.A.J. Somers: Metall. Mater. Trans. A, 2016, vol. 47, pp. 4146-4159.10.1007/s11661-016-3559-7 ↗
10. F. Borgioli, E. Galvanetto, and T. Bacci: Vacuum, 2016, vol. 127, pp. 51-60.10.1016/j.vacuum.2016.02.009 ↗
11. Y.S. Kim, S.H. Bak, and S.S. Kim: Metall. Mater. Trans. A, 2016, vol. 47, pp. 222-230.10.1007/s11661-015-3198-4 ↗
12. K. Spencer, J.D. Embury, K.T. Conlon, M. Véron, and Y. Bréchet: Mater. Sci. Eng. A, 2004, vol. 387-389, pp. 873-881.10.1016/j.msea.2003.11.084 ↗
13. A.K. De, J.G. Speer, D.K. Matlock, D.C. Murdock, M.C. Mataya, and R.J. Comstock Jr.: Metall. Mater. Trans. A, 2006, vol. 37, pp. 1875-1886.10.1007/s11661-006-0130-y ↗
14. K. Tomimura, S. Takaki, S. Tanimoto, and Y. Tokunaga: ISIJ Int., 1991, vol. 31, pp. 721-727.10.2355/isijinternational.31.721 ↗
15. A. Di Schino, M. Salvatori, and J.M. Kenny: J. Mater. Sci., 2002, vol. 7, pp. 4561-4565.10.1023/A:1020631912685 ↗
16. D.L. Johannsen, A. Kyrolinen, and P.J. Ferriera: Metall. Mater. Trans. A, 2006, vol. 37, pp. 2325-2338.10.1007/BF02586207 ↗
17. A.F. Padilha, R.L. Plaut, and P.R. Rios: ISIJ Int., 2003, vol. 43, pp. 135-143.10.2355/isijinternational.43.135 ↗
18. K. Tomimura, S. Takaki, and Y. Tokunaga: ISIJ Int., 1991, vol. 31, pp. 1431-1437.10.2355/isijinternational.31.1431 ↗
19. R.D.K. Misra, J.S. Shah, S. Mali, P.K.C. Venkata Surya, M.C. Somani, and L.P. Karjalainen: Mater. Sci. Tech., 2013, vol. 29, pp. 1185-1192.10.1179/1743284712Y.0000000173 ↗
20. A. Poulon-Quintin, S. Brochet, J.B. Vogt, J.C. Glez, and J.D. Mithieux: ISIJ Int., 2009, vol. 49, pp. 293-301.10.2355/isijinternational.49.293 ↗
21. M. Shirdel, H. Mirzadeh, and M.H. Parsa: Mater. Charact., 2015, vol. 103, pp. 150-161.10.1016/j.matchar.2015.03.031 ↗
22. C. Celada-Casero, B.M. Huang, M.M. Aranda, J.-R. Yang, and D. San Martin: Mater. Charact., 2016, vol. 118, pp. 129-141.10.1016/j.matchar.2016.05.014 ↗
23. T. Angel: J. Iron Steel Inst., 1954, vol. 177, pp. 165-174.
24. K. Nohara, Y. Ono, N. Ohashi: J. Iron Steel Inst. Jpn., 1977, vol. 63, pp. 212-222.
25. S.K. Varma, J. Kalyanam, L.E. Murr, and V. Srinivas: J. Mater. Sci. Lett., 1994, vol. 13, pp. 107-111.10.1007/BF00416816 ↗
26. V. Seetharaman and R. Krishnan: J. Mater. Sci., 1981, vol 16, pp. 523-530.10.1007/BF00738646 ↗
27. M. Eskandari, A. Najafizadeh, and A. Kermanpur: Mater. Sci. Eng. A, 2009, vol. 519, pp. 46-50.10.1016/j.msea.2009.04.038 ↗
28. V. Shrinivas, S.K. Varma, and L.E. Murr: Metall. Mater. Trans. A, 1995, vol. 26, pp. 661-671.10.1007/BF02663916 ↗
29. N. Nakada, H. Ito, Y. Matsuoka, T. Tsuchiyama, and S. Takaki: Acta Mater., 2010, vol. 58, pp. 895-903.10.1016/j.actamat.2009.10.004 ↗
30. M. Odnobokova, A. Belyakov, and R. Kaibyshev: Adv. Eng. Mater., 2015, vol. 17, pp. 1812-1820.10.1002/adem.201500100 ↗
31. K. Spencer, M. Veron, K. Yu-Zhang, and J.D. Embury: Mater. Sci. Technol., 2009, vol. 25, pp. 7-17.10.1179/174328408X293603 ↗
32. Y.F. Shen, X.X. Li, X. Sun, Y.D. Wang, and L. Zuo: Mater. Sci. Eng. A, 2012, vol. 552, pp. 514-522.10.1016/j.msea.2012.05.080 ↗
33. G. Fargas, A. Zapata, J.J. Roa, I. Sapezanskaia, and A. Mateo: Metall. Mater. Trans. A, 2015, vol. 46, pp. 5697-5707.10.1007/s11661-015-3178-8 ↗
34. M. Okayasu, H. Fukui, H. Ohfuji, and T. Shiraishi: J. Mater. Sci., 2013, vol. 48, pp. 6157-6166.10.1007/s10853-013-7412-8 ↗
35. H. Mirzadeh and A. Najafizadeh: Mater. Charact., 2008, vol. 59, pp. 1650-1654.10.1016/j.matchar.2008.03.004 ↗
36. A. Kisko, A.S. Hamada, J. Talonen, D. Porter, and L.P. Karjalainen: Mater. Sci. Eng. A, 2016, vol. 657, pp. 359-370.10.1016/j.msea.2016.01.093 ↗
37. P. Behjati, A. Kermanpur, L.P. Karjalainen, A. Järvenpää, M. Jaskari, H. Samaei Baghbadorani, A. Najafizadeh, and A. Hamada: Mater. Sci. Eng. A, 2016, vol. 650, pp. 119-128.10.1016/j.msea.2015.09.069 ↗
38. M. Naghizadeh and H. Mirzadeh: Metall. Mater. Trans. A, 2016, vol. 47, pp. 5698- 5703.10.1007/s11661-016-3764-4 ↗
39. M. Shirdel, H. Mirzadeh, and M.H. Parsa: Mater. Sci. Eng. A, 2015, vol. 624, pp. 256-260.10.1016/j.msea.2014.11.087 ↗
40. H. Mirzadeh, M. Alibeyki, and M. Najafi: Metall. Mater. Trans. A, 2017, vol. 48, pp. 4565-4573.10.1007/s11661-017-4246-z ↗
41. 42. B. Fultz and J. Howe: Transmission electron microscopy and diffractometry of materials, 3rd ed., Springer, Berlin, Germany, 2008.
42. A. Etienne, B. Radiguet, C. Genevois, J.M. Le Breton, R. Valiev, and P. Pareige: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5805-5810.10.1016/j.msea.2010.05.049 ↗
43. G.B. Olson and M. Cohen: J. Less Common Met., 1972, vol. 28, pp. 107-118.10.1016/0022-5088(72)90173-7 ↗
44. K.H. Lo, C.H. Shek, and J.K.L. Lai: Mater. Sci. Eng. R, 2009, vol. 65, pp. 39-104.10.1016/j.mser.2009.03.001 ↗
45. F. Lecroisey and A. Pineau: Metall. Trans., 1972, vol. 3, pp. 387- 396.10.1007/BF02642042 ↗
46. J.C. Li, M. Zhao, and Q. Jiang: Metall. Mater. Trans. A, 2000, vol. 31, pp. 581-584.10.1007/s11661-000-0001-x ↗
47. R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6, pp. 1345- 1351.10.1007/BF02641927 ↗
48. F. Gauzzi, R. Montanari, G. Principi, A. Perin, M.E. Tata: Mater. Sci. Eng. A, 1999, vol. 273-275, pp. 443-447.10.1016/S0921-5093(99)00324-X ↗
49. M. Eskandari, A. Kermanpur, A. Najafizadeh: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2241-2249.10.1007/s11661-009-9916-z ↗
50. M. McGuire: Stainless Steels for Design Engineers, ASM International, Almere, 2008.10.31399/asm.tb.ssde.9781627082860 ↗
51. C.M. Hammond: Cobalt, 1964, vol. 25, pp. 195-202.
52. G.H. Eichelman and F.C. Hull: Trans. Am. Soc. Met., 1953, vol. 45, pp. 77-95.
53. S. Yamamoto, T. Sakiyama, and C. Ouchi: Trans. ISIJ., 1987, vol. 27, pp. 446-452.10.2355/isijinternational1966.27.446 ↗
54. A. Di Schino, J.M. Kenny, and G. Abbruzzese: J. Mater. Sci., 2002, vol. 37, pp. 5291-5298.10.1023/A:1021068806598 ↗
55. G. Gottstein and L.S. Shvindlerman: Grain Boundary Migration in Metals: Thermodynamics, Kinetics, Applications, 2nd ed., CRC Press, Boca Raton, 2010.