Microstructural Characterization of Laser-Deposited Al 4047 Alloy
Source abstract
Abstract
Direct metal deposition (DMD) technology is a laser-aided rapid prototyping method that can be used to fabricate near net shape components from their CAD files. In the present study, a series of Al-Si samples have been deposited by DMD in order to optimize the laser deposition parameters to produce high quality deposit with minimum porosity and maximum deposition rate. This paper presents the microstructural evolution of the as-deposited Al 4047 sample produced with optimized process parameters. Optical, scanning, and transmission electron microscopes have been employed to characterize the microstructure of the deposit. The electron backscattered diffraction method was used to investigate the grain size distribution, grain boundary misorientation, and texture of the deposits. Metallographic investigation revealed that the microstructural morphology strongly varies with the location of the deposit. The layer boundaries consist of equiaxed Si particles distributed in the Al matrix. However, a systematic transition from columnar Al dendrites to equiaxed dendrites has been observed in each layer. The observed variation of the microstructure was correlated with the thermal history and local cooling rate of the melt pool.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. E.L. Rooy: Metals Handbook, ASM International, Ohio, 1988, vol. 15, pp. 743–70.
2. J.R. Davis, ed.: Aluminum and Aluminum Alloys, ASM International, Ohio, 1993, pp. 627–33.
3. M. Pieranton, M. Gremau, P. Magnin, D. Stoll, and W. Kurz: Acta Metallurgica Et Materialia 1992, vol. 40, pp. 1637–44.10.1016/0956-7151(92)90106-O ↗
4. M. Gremaud, D.R. Allen, M. Rappaz, J.H. Perepezko: Acta Mater., 1996, vol. 44, pp. 2669–81.10.1016/1359-6454(95)00393-2 ↗
5. D.R. Allen, M. Gremaud, and J.H. Perepezko: Mater. Sci. Eng. A-Struct. Mater. Properties Microstruct. Process., 1997, vol. 226, pp. 173–77.10.1016/S0921-5093(96)10612-2 ↗
6. A.K. Dahle, K. Nogita, J.W. Zindel, S.D. McDonald, and L.M. Hogan: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 949–60.10.1007/s11661-001-0352-y ↗
7. S.D. McDonald, K. Nogita, and A.K. Dahle: J. Alloy. Compd., 2006, vol. 422, pp. 184–91.10.1016/j.jallcom.2005.11.070 ↗
8. S.D. McDonald, K. Nogita, and A.K. Dahle: Acta Mater., 2004, vol. 52, pp. 4273–80.10.1016/j.actamat.2004.05.043 ↗
9. S.K. Bose and R. Kumar: J. Mater. Sci., 1973, vol. 8, pp. 1795–99.10.1007/BF02403532 ↗
10. S. Das, A.H. Yegneswaran, and P.K. Rohatgi: J. Mater. Sci., 1987, vol. 22, pp. 3173–77.10.1007/BF01161179 ↗
11. C.L. Xu, H.Y. Wang, F. Qiu, and Y.F. Yang, and Q.C. Jiang: Mater. Sci. Eng. A-Struct. Mater. Properties Microstruct. Process., 2006, vol. 417, pp. 275–80.
12. A.W. Orlowicz and M. Mroz: Zeitschrift Fur Metallkunde 2005, vol. 96, pp. 1391–97.10.3139/146.101190 ↗
13. R. Trivedi, F. Jin, and I.E. Anderson: Acta Mater., 2003, vol. 51, pp. 289–300.10.1016/S1359-6454(02)00226-4 ↗
14. Y.E. Kalay, L.S. Chumbley, I.E. Anderson, and R.E. Napolitano: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1452–57.10.1007/s11661-007-9168-8 ↗
15. P.W. Leech: Thin Solid Films, 1989, vol. 177, pp. 133–40.10.1016/0040-6090(89)90562-2 ↗
16. M. Pierantoni, J.D. Wagniere, and E. Blank: Mater. Sci. Eng. A-Struct. Mater. Properties Microstruct. Process., 1989, vol. 110, pp. L17–21.10.1016/0921-5093(89)90182-2 ↗
17. C. Rieker and D.G. Morris: Acta Metall. Mater., 1990, vol. 38, pp. 1037–43.10.1016/0956-7151(90)90176-H ↗
18. J. Mazumder, J. Choi, K. Nagarathnam, J. Koch, and D. Hetzner: JOM, 1997, vol. 49, pp. 55–60.10.1007/BF02914687 ↗
19. J. Mazumder, D. Dutta, N. Kikuchi, and A. Ghosh: Opt. Lasers Eng., 2000, vol. 34, pp. 397–414.10.1016/S0143-8166(00)00072-5 ↗
20. G.P. Dinda, L. Song, and J. Mazumder: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2914–22.10.1007/s11661-008-9634-y ↗
21. G.P. Dinda, A.K. Dasgupta, and J. Mazumder: Mater. Sci. Eng. A-Struct. Mater. Properties Microstruct. Process., 2009, vol. 509, pp. 98–104.10.1016/j.msea.2009.01.009 ↗
22. J.O. Milewski, G.K. Lewis, D.J. Thoma, G.I. Keel, R.B. Nemec, R.A. Reinert: J. Mater. Process. Technol., 1998, vol. 75, pp. 165–72.10.1016/S0924-0136(97)00321-X ↗
23. R. Mah: Adv. Mater. Process., 1997, vol. 151, pp. 31–33.
24. D.M. Keicher, J.E. Smugeresky, J.A. Romero, M.L. Griffith, and L.D. Harwell: Lasers Tools Manufact. Ii, 1997, vol. 2993, pp. 91–97.10.1117/12.270018 ↗
25. M.L. Griffith, D.M. Keicher, C.L. Atwood, J.A. Romero, J.E. Smugeresky, L.D. Harwell, and D.L. Greene: Solid Freeform Fabrication Proceedings, 1996, pp. 125–33.
26. M. Agarwala, D. Bourell, J. Beaman, H. Marcus, and J. Barlow: Rapid Prototyping J., 1995, vol. 1, pp. 26–36.10.1108/13552549510078113 ↗
27. D.L. Bourell, H.L. Marcus, J.W. Barlow, J.J. Beaman: Int. J. Powder Metall., 1992, vol. 8, pp. 369–81.
28. S.S. Moir and H. Jones: J. Cryst. Growth 1991, vol. 113, pp. 77–82.10.1016/0022-0248(91)90011-S ↗
29. X. Cai, X.Y. Yang, T. Zhao, L. H. Li, and Q.L. Chen: Adv. Fract. Strength, Pts 1–4 2005, vols. 297–300, pp. 2813–18.10.4028/www.scientific.net/KEM.297-300.2813 ↗
30. Y.L. Gao, C.S. Wang, Q. Lin, H.B. Liu, and M. Yao: Surf. Coat. Technol., 2006, vol. 201, pp. 2701–06.10.1016/j.surfcoat.2006.05.011 ↗