journal article·2007-02

Miniature Specimen Assessment of Creep of the Single-Crystal Superalloy LEK 94 in the 1000 °C Temperature Range

G. Mälzer, R.W. Hayes, T. Mack, G. Eggeler

Publisher page

Abstract

The creep behavior of the Ni-base superalloy LEK 94 in the 1000 °C range has been investigated. Miniature tensile specimens were employed, which can be taken out of a thin walled blade or used when only limited amounts of material are available. We show that this miniature test technique yields reasonable creep data, including stress exponents n and apparent activation energies Q app. The n values are close to 5 and the Q app values are close to 500 kJ/mole, independent of the crystallographic direction. Creep rates are fastest for samples oriented in the [110] direction, followed by [001] samples. The lowest creep rates are observed for the [111] direction. This difference is related to a difference in resolved shear stresses and in the number of activated crystallographic slip systems. As a striking new result, it was observed that the onset of tertiary creep occurs earlier and rupture strains are significantly smaller in the case of [110] specimens as compared to [100] specimens, while the [111] specimens show an intermediate behavior. These effects are related to the alignment of cast porosity along the axis of primary dendrites. When cast micropores align perpendicular to the axis of the applied tensile stress, the onset of fast tertiary creep occurs early and small rupture strains are observed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. B.H. Kear, S.M. Copley, B.J. Piearcey: Proc. 6th Int. Congr. for Electron Microscopy, Nihnbashi Ltd., Kyoto, 1966, pp. 397–98
2. C.T. Sims: in Superalloys 1984, Maurice Gell et al., eds., TMS, Warrendale, PA, 1984, pp. 399–41910.7449/1984/Superalloys_1984_399_419 ↗
3. D.D. Pearson, R.D. Lemkey, and B.H. Kear: in Superalloys 1980, Proc. 4th Int. Symp. on Superalloys, ASM, Metals Park, OH, 1980, p. 51310.7449/1980/Superalloys_1980_513_520 ↗
4. M. McLean: Directionally Solidified Materials for High Temperature Service, The Metals Society, London, 1983
5. M.V. Nathal, R.A. MacKay, R.V. Miner: Metall. Trans. A, 1989, vol. 20A, pp. 133–4110.1007/BF02647500 ↗
6. M. Kolbe, J. Murken, D. Pistolek, G. Eggeler, H.-J. Klam: Mat.-wiss Werkstofftech., 1999, vol. 30, pp. 465–7210.1002/(SICI)1521-4052(199908)30:8<465::AID-MAWE465>3.0.CO;2-L ↗
7. J. Murken, K. Serin, and G. Eggeler: Proc. Baltica V—Int. Conf. on Cond. Life Managem. Power Plants, S. Hietanen and P. Auerkari, eds., VTT Technical Research Centre of Finland, Espoo, 2001, vol. 2, pp. 583–91
8. G. Mälzer, A. Kostka, G. Eggeler, S. Reese, T. Mack: TMS Lett., 2005, vol. 2, pp. 27–28
9. C. Carry, J.L. Strudel: Acta Metall., 1977, vol. 25, pp. 767–7710.1016/0001-6160(77)90092-X ↗
10. C. Carry, J.L. Strudel: Acta Metall., 1978, vol. 26, pp. 859–7010.1016/0001-6160(78)90035-4 ↗
11. C. Carry, S. Dermarkar, J.L. Strudel, B.C. Wonsiewicz: Metall. Trans. A, 1979, vol. 10A, pp. 855–6010.1007/BF02658304 ↗
12. M. Feller-Kniepmeier, T. Link: Z. Metallkd., 1985, vol. 76, pp. 283–87
13. M. Feller-Kniepmeier, T. Link: Metall. Trans. A, 1989, vol. 20A, pp. 1233–3810.1007/BF02647405 ↗
14. B. Decamps, A. Morton, M. Condat: Phil. Mag., 1991, vol. 64, pp. 641–6810.1080/01418619108204866 ↗
15. T. Pollock, A.S. Argon: Acta Metall. Mater., 1992, vol. 40, 1992, pp. 1–3010.1016/0956-7151(92)90195-K ↗
16. U. Glatzel: Microstructure and Internal Strains of Undeformed and Creep Deformed Samples of a Nickel-Base Superalloy (Habilitationsschrift), Verlag Dr. Köster, Berlin, 1994
17. M. Benyoucef, N. Clement, A. Coujou: Phil. Mag., 1995, vol. 72, pp. 1043–5610.1080/01418619508239952 ↗
18. H. Mughrabi, H. Feng, and H. Biermann: Proc. IUTAM Symp. Held at Sèvres, A. Pineau and A. Zaoui, eds., Kluwer Academic Publishers, Dordrecht, 1996
19. F.R.N. Nabarro, H.L. de Villiers: The Physics of Creep, Taylor & Francis, London, 1995
20. C. Mayr, G. Eggeler, A. Dlouhy: Mater. Sci. Eng., 1996, vol. A207, pp. 51–6310.1016/0921-5093(96)80002-5 ↗
21. M. Probst-Hein, A. Dlouhy, G. Eggeler: Acta Mater., 1999, vol. 47, pp. 2497–251010.1016/S1359-6454(99)00092-0 ↗
22. Z. Peng, U. Glatzel, T. Link, M. Feller-Kniepmeier: Scripta Mater., 1996, vol. 34, pp. 221–2610.1016/1359-6462(95)00510-2 ↗
23. M. Veron, Y. Brechet, and F. Louchet: in Superalloys 1996, R.D. Kissinger et al., eds., TMS, Warrendale, 1996, pp. 181–9010.7449/1996/Superalloys_1996_181_190 ↗
24. M. Kamaraj, C. Mayr, M. Kolbe, G. Eggeler: Scripta Mater., 1998, vol. 38, pp. 589–9410.1016/S1359-6462(97)00520-4 ↗
25. M. Kamaraj, K. Neuking, M. Kolbe, and G. Eggeler: Materials for Advanced Power Engineering, Proc. 6th Liege Conf., Part II, J. Lecomte-Beckers et al., eds., Schriften des Forschungszentrum Jülich, Reihe Energietechnik/Energy Technology, Jülich, 1998, vol. 5
26. G. Eggeler, A. Dlouhy: Acta Mater., 1997, vol. 45, pp. 4251–6210.1016/S1359-6454(97)00084-0 ↗
27. R. Srinivasan, G. Eggeler, M.J. Mills: Acta Mater., 2000, vol. 48, pp. 4867–7810.1016/S1359-6454(00)00292-5 ↗
28. A. Kostka, G. Mälzer, G. Eggeler, A. Dlouhy, S. Reese, and T. Mack: J. Mater. Sci., 2006, in press
29. J.X. Zhang, H. Harada, Y. Koizumi: J. Mater. Res., 2006, vol. 21, pp. 647–5410.1557/jmr.2006.0085 ↗
30. S.H. Ai, V. Lupinc, M. Maldini: Scripta Metall. Mater., 1992, vol. 26, pp. 579–8410.1016/0956-716X(92)90287-O ↗
31. A.H. Sherry, R. Pilkington: Mater. Sci. Eng., 1993, vol. A 172, pp. 51–6110.1016/0921-5093(93)90425-E ↗
32. A.M. Hashem, D. Goldschmidt, E. El-Magd: Mat.-wiss. Werkstofftech., 1994, vol. 25, pp. 133–3810.1002/mawe.19940250310 ↗
33. N. Matan, D.C. Cox, C.M.F. Rae, R.C. Reed: Acta Mater., 1999, vol. 47, pp. 2031–4510.1016/S1359-6454(99)00093-2 ↗
34. A. Fredholm and J.L. Strudel: High Temperature Alloys, Their Exploitable Potential, Proc. Petten. Int. Conf., 1985, J.B. Mariott, H. Herz, J. Nihoul, and J. Ward, eds., Elsevier Applied Science, London,1987, pp. 9–18
35. A. Epishin, T. Link, U. Brückner, P.D. Portella: Acta Mater., 2001, vol. 49, pp. 4017–2310.1016/S1359-6454(01)00290-7 ↗
36. K. Serin, R.D. Neuser, G. Eggeler, M. Kamaraj, M. Kolbe, M. Heitkemper: Prakt. Metallogr., 2001, vol. 38, pp. 680–9810.1515/pm-2001-381203 ↗
37. W. Schneider: Ph.D. Thesis, Universität Erlangen-Nürnberg, Nürnberg, 1993
38. K. Serin, G. Göbenli, G. Eggeler: Mater. Sci. Eng., 2004, vols. A387–A389, pp. 133–3710.1016/j.msea.2004.01.114 ↗
39. M. Kolbe, A. Dlouhy, G. Eggeler: Mater. Sci. Eng., 1998, vol. A 246, pp. 133–4210.1016/S0921-5093(97)00733-8 ↗
40. G.K. Bouse and J.R. Mihalisin: in Superalloys, Supercomposites and Superceramics, J.K. Tien and T. Caulfield, in Materials Science and Technology Series, A.S. Nowick and G.G. Libowitz, eds., Academic Press, Inc., San Diego, CA, 1989
41. H. Riedel: Fracture at High Temperatures, Springer-Verlag, Berlin, 198710.1007/978-3-642-82961-1 ↗
42. G. Eggeler, J.C. Earthman, N. Nilsvang, B. Ilschner: Acta Metall., 1989, vol. 37, pp. 49–6010.1016/0001-6160(89)90265-4 ↗
43. G. Eggeler: Acta Metall. Mater., 1991, vol. 39, pp. 221–3110.1016/0956-7151(91)90270-B ↗
44. G. Mälzer: Ph.D. Thesis, Ruhr-Universität Bochum, Bochum, 2007
45. R.W. Evans, B. Wilshire: Creep of Metals and Alloys, Institute of Metals, London, 1985
46. B. Ilschner: Hochtemperatur-Plastizität, Springer-Verlag, Berlin, 197310.1007/978-3-642-80708-4 ↗
47. R.A. MacKay, L.J. Ebert: Metall. Trans. A, 1985, vol. 16A, pp. 1969–8210.1007/BF02662398 ↗
48. M. Maldini, V. Lupinc: Scripta Metall., 1988, vol. 22, pp. 1737–4110.1016/S0036-9748(88)80275-8 ↗
49. R. Wege, J. Wortmann: Mat.-wiss. Werkstofftech., 1989, vol. 20, pp. 207–1610.1002/mawe.19890200614 ↗
50. H. Bakker: Phys. Status Solidi, 1968, vol. 28, pp. 569–7610.1002/pssb.19680280214 ↗
51. G.F. Hancock: Phys. Status Solidi (a), 1971, vol. 7, pp. 535–4010.1002/pssa.2210070228 ↗
52. T. Link, S. Zabler, A. Epishin, A. Haibel, M. Bansal, X. Thibault: Mater. Sci. Eng., 2006, vol. A425, pp. 47–5410.1016/j.msea.2006.03.005 ↗