journal article·2016-05

Effect of Grain Refinement on Jerky Flow in an Al-Mg-Sc Alloy

Anna Mogucheva, Diana Yuzbekova, Rustam Kaibyshev, Tatiana Lebedkina, Mikhail Lebyodkin

Publisher page

Abstract

The influence of microstructure on the manifestations of the Portevin–Le Chatelier (PLC) effect was studied in an Al-Mg-Sc alloy with unrecrystallized, partially recrystallized, and fully recrystallized grain structures. It was found that the extensive grain refinement promotes plastic instability: the temperature–strain rate domain of the PLC effect becomes wider and the critical strain for the onset of serrations decreases. Besides, the amplitude of regular stress serrations observed at room temperature and an intermediate strain rate increases several times, indicating a strong increase of the contribution of solute solution hardening to the overall strength. Moreover, the grain refinement affects the usual sequence of the characteristic types of stress serrations, which characterize the dynamical mechanisms governing a highly heterogeneous unstable plastic flow. Finally, it reduces the strain localization and surface roughness and diminishes the difference between the surface markings detected in the necked area and in the region of uniform elongation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. A. Portevin, F. LeChatelier: Compt. Rend. Acad. Sci. Paris, 1923, vol. 176, pp. 507-10.
2. A. Portevin, F. Le Chatelier: Trans. ASST, 1924, vol. 5, pp. 457-78.
3. H. Aboulfadl, J. Deges, P. Choi and D. Raabe: Acta Mater., 2015, vol. 86, pp. 34-42.10.1016/j.actamat.2014.12.028 ↗
4. J.M. Robinson and M.P. Shaw: Intern. Mater. Reviews., 1994, vol. 39, pp. 113-22.10.1179/imr.1994.39.3.113 ↗
5. H. Halim, D.S. Wilkinson and M. Niewczas: Acta Mater., 2007, vol. 55, pp. 4151-60.10.1016/j.actamat.2007.03.007 ↗
6. I.J. Polmear: Light Alloys. From Traditional Alloys to Nanocrystals, 4th ed., Elsevier, Amsterdam, 2006, p. 421.
7. M.S. Bharathi, M. Lebyodkin, G. Ananthakrishna, C. Fressengeas and L.P. Kubin: Acta Mater., 2002, vol. 50, pp. 2813-24.10.1016/S1359-6454(02)00099-X ↗
8. J. Kang, D.S. Wilkinson, M. Jain, J.D. Embury, A.J. Beaudoin, S. Kim et al.: Acta Mater., 2006, vol. 54, pp. 209-18.10.1016/j.actamat.2005.08.045 ↗
9. H. Neuhauser: Patterns, Defects and Material Instabilities, D. Walgref and N.M. Ghoniem, eds., Kluwer Academic Publ, Dordrecht, 1990, pp. 241–77.10.1007/978-94-009-0593-1_19 ↗
10. Y. Estrin and L.P. Kubin: Continuum Models for Materials with Microstructure, H.B. Muhlhaus, ed., Wiley, New York, 1995, pp. 395–450.
11. R.C. Picu: Acta Mater., 2004, vol. 52, pp. 3447-58.10.1016/j.actamat.2004.03.042 ↗
12. J. Balik and P. Lukac: Acta Metall. Mater., 1993, vol. 41, pp. 1447-54.10.1016/0956-7151(93)90253-O ↗
13. M.R. Stoudt, J.B. Hubbard, M.A. Iadicola and S.W. Banovic: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1611-22.10.1007/s11661-009-9881-6 ↗
14. H. Louche, P. Vacher and R. Arrieux: Mater. Sci. Eng. A, 2005, vol. 404, pp. 188-96.10.1016/j.msea.2005.05.058 ↗
15. H. Jiang, Q. Zhang, X. Chen, Zh. Chen, Zh. Jiang, X. Wu et al.: Acta Mater., 2007, vol. 55, pp. 2219-28.10.1016/j.actamat.2006.10.029 ↗
16. M.A. Lebyodkin and T.A. Lebedkina: Phys. Rev. E, 2008, vol. 77, pp. 026111(1-8).10.1103/PhysRevE.77.026111 ↗
17. I.V. Shashkov, M.A. Lebyodkin and T.A. Lebedkina: Acta Mater., 2012, vol. 60, pp. 6842-50.10.1016/j.actamat.2012.08.058 ↗
18. Sh. Zhao, Ch. Meng, F. Mao, W. Hu and G. Gottstein: Acta Mater., 2014, vol. 76, pp. 54-67.10.1016/j.actamat.2014.05.004 ↗
19. W. Wen and J.G. Morris: Mater. Sci. Eng. A, 2004, vol. 373, pp. 204-16.10.1016/j.msea.2004.01.041 ↗
20. A. Sarkar, P. Barat, P. Mukherjee: Metall. Mater. Trans. A, 2013, vol. 44, pp. 2604-12.10.1007/s11661-013-1630-1 ↗
21. M.A. Muñoz-Morris, C.G. Oca and D.G. Morris: Scr. Metall., 2003, vol. 48, pp. 213-18.10.1016/S1359-6462(02)00501-8 ↗
22. M.V. Markushev and M.Y. Murashkin: Mater. Sci. Eng. A, 2004, vol. 367, pp. 234-42.10.1016/j.msea.2003.10.237 ↗
23. T.A. Lebedkina, M.A. Lebyodkin, T.T. Lamark, M. Janeček and Y. Estrin: Mater. Sci. Eng. A, 2014, vol. 615, pp. 7-13.10.1016/j.msea.2014.07.064 ↗
24. R. Kapoor, C. Gupta, G. Sharma and J.K. Chakravartty: Scr. Mater., 2005, vol. 53, pp. 1389-93.10.1016/j.scriptamat.2005.08.026 ↗
25. M. Wagenhofer, M. Erickson-Natishan, R.W. Armstrong, F.J. Zerilli: Scripta Mater., 1999, vol. 41, pp. 1177–84.10.1016/S1359-6462(99)00265-1 ↗
26. S. Malopheyev and R. Kaibyshev: Mater. Sci. Eng. A, 2014, vol. 620, pp. 246-52.10.1016/j.msea.2014.10.030 ↗
27. P. Fernandez-Zelaia, B.S. Adair, V.M. Barker, S.D. Antolovich: Metall. Mater.Trans. A, 2015, vol.46, pp.5596-5609.10.1007/s11661-015-3126-7 ↗
28. D.A. Zhemchuzhnikova, M.A. Lebyodkin, T.A. Lebedkina, R.O. Kaibyshev: Mater. Sci. Eng. A, 2015, vol. 639. pp. 37-41.10.1016/j.msea.2015.04.094 ↗
29. A. Mogucheva, E. Babich, B. Ovsyannikov and R. Kaibyshev: Mater. Sci. Eng. A, 2013, vol. 560, pp. 178-92.10.1016/j.msea.2012.09.054 ↗
30. R.Z. Valiev and T.G. Langdon: Prog. Mater. Sci., 2006, vol. 51, pp. 881-981.10.1016/j.pmatsci.2006.02.003 ↗
31. R. Schwab and V. Ruff: Acta Mater., 2013, vol. 61, pp. 1798-808.10.1016/j.actamat.2012.12.003 ↗
32. C.Y. Yu, P.W. Kao, C.P. Chang: Acta Mater., 2005, vol. 53, pp. 4019-28.10.1016/j.actamat.2005.05.005 ↗
33. S.D. Antolovich and R.W. Armstrong: Prog. Mater. Sci., 2014, vol. 59, pp. 1-160.10.1016/j.pmatsci.2013.06.001 ↗
34. T.A. Lebedkina and M.A. Lebyodkin: Acta Mater., 2008, vol. 56, pp. 5567-74.10.1016/j.actamat.2008.07.025 ↗
35. R. Král and P. Lukáč: Mater. Sci. Eng. A, 1997, vol. 234-236, pp. 786-89.10.1016/S0921-5093(97)00327-4 ↗
36. A.H. Cottrell: Phil. Mag., 1953, vol. 44, pp. 829-32.10.1080/14786440808520347 ↗
37. M.A. Lebyodkin, Y. Brechet, Y. Estrin and L.P. Kubin: Phys. Rev. Lett., 1995, vol. 74, pp. 4758-61.10.1103/PhysRevLett.74.4758 ↗
38. P.S. Lee, H.R. Piehler, B.L. Adams, G. Jarvis, H. Hampel and A.D. Rollett: J. Mater. Process. Technol., 1998, vol. 80-81, pp. 315-19.10.1016/S0924-0136(98)00189-7 ↗
39. M. Jain, D.J. Lloyd and S.R. Macewen: Int. J. Mech. Sci., 1996, vol. 38, pp. 219-32.10.1016/0020-7403(95)00038-Y ↗
40. Y.S. Choi, H.R. Piehler and A.D. Rollett: Metall.Mater.Trans A, 2004, vol. 35, pp. 513-24.10.1007/s11661-004-0362-7 ↗
41. S. Raj and T. Langdon: Acta Metall. Mater., 1991, vol. 39, pp. 1817-22.10.1016/0956-7151(91)90150-Y ↗
42. J. Kang, D.S. Wilkinson, J.D. Embury, M. Jain and A.J. Beaudoin: Scr. Mater., 2005, vol. 53, pp. 499-503.10.1016/j.scriptamat.2005.05.010 ↗
43. R. Kaibyshev, O. Sitdikov, A. Goloborodko and T. Sakai: Mater.Sci.Eng. A, 2003, vol. 344, pp. 348-56.10.1016/S0921-5093(02)00440-9 ↗
44. A. Pineau, Phil. Trans. R. Soc. A, 2015, vol. 373: 20140131. (http://dx.doi.org/10.1098/rsta.2014.0131)10.1098/rsta.2014.0131 ↗
45. V. Bata, E.V. Pereloma, Acta Mater., 2004, vol. 52, pp. 657–665.10.1016/j.actamat.2003.10.002 ↗
46. I.A. Ovid’ko, A.G. Sheinerman, R.Z. Valiev, Scripta Mater., 2014, vol. 76, pp. 45–48.10.1016/j.scriptamat.2013.12.012 ↗
47. R.Z. Valiev, N.A. Enikeev, M.Yu. Murashkin, V.U. Kazykhanov, X. Sauvage, Scripta Mater., 2010, vol. 63, pp. 949–952.10.1016/j.scriptamat.2010.07.014 ↗
48. P. Hahner: Acta Mater., 1997, vol. 45, pp. 3695-707.10.1016/S1359-6454(97)00066-9 ↗
49. L.P. Kubin, Y. Estrin: Acta Metall. Mater., 1990, vol. 38, pp. 697-708.10.1016/0956-7151(90)90021-8 ↗
50. Sh. Fu, T. Cheng, Q. Zhang, Q. Hu and P. Cao: Acta Mater., 2012, vol. 60, pp. 6650-56.10.1016/j.actamat.2012.08.035 ↗
51. J. Røyset, N. Ryum, Inter. Mater. Rev., 2005, vol. 50, pp. 19-44.10.1179/174328005X14311 ↗
52. M. Jobba, R.K. Mishra and M. Niewczas: Inter.J.Plast., 2015, vol. 65 pp. 43-60.10.1016/j.ijplas.2014.08.006 ↗
53. B. Tian: Mater. Sci. Eng. A, 2003, vol. 349, pp. 272-78.10.1016/S0921-5093(02)00769-4 ↗
54. H. Ait-Amokhtar, S. Boudrahema and C. Fressengeas: Scr. Mater., 2006, vol. 54, pp. 2113-18.10.1016/j.scriptamat.2006.03.006 ↗
55. J. Kang, R.K. Mishra, D.S. Wilkinson, O.S. Hopperstad: Phyl. Mag. Lett., 2012, vol. 92, pp. 647-55.10.1080/09500839.2012.714082 ↗
56. Y. Estrin, M.A. Lebyodkin: Mater.Sci.Eng. A, 2004, vol. 387-389, pp. 195-98.10.1016/j.msea.2004.01.079 ↗
57. E. Nembach: Particle Strengthening of Metals and Alloys, Wiley, New York, 1996.
58. R. Nogueira de Codes, O.S. Hopperstadt, O. Engler, O.G. Lademo, J.D. Embury and A. Benallal: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3358-69.10.1007/s11661-011-0749-1 ↗