Influence of the Tool Pin and Shoulder on Microstructure and Natural Aging Kinetics in a Friction-Stir-Processed 6061–T6 Aluminum Alloy
Source abstract
Abstract
The influence of the stirring pin and pressing tool shoulder on the microstructural softening during friction-stir processing (FSP) and subsequent natural aging behavior was investigated for a 6061-T6 aluminum alloy. The evolution of hardness profiles in various characteristic regions of the FSP plates was investigated as a function of time from 4 to 5760 hours after the FSP through the thickness of the plates and correlated to the microstructure and residual strain profiles measured by a neutron-diffraction technique. The results show that the microstructural softening and the natural aging observed in the dynamic recrystallized zone and thermomechanically affected zone are mainly caused by the frictional heating from the tool shoulder, resulting in dissolution and reprecipitation of strengthening precipitates. On the other hand, the softening in the heat-affected zone is due to the dissolution/growth of the precipitates and is not followed by the natural aging under the current processing condition. The kinetics of the natural aging behavior is also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: Friction Stir Butt Welding, International Patent No. PCT/GB92/02203, GB Patent No. 9125978.8, 1991, U.S. Patent No. 5,460,317, 1995
2. R.S. Mishra, Z.Y. MA: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1–7810.1016/j.mser.2005.07.001 ↗
3. M.W. Mahoney, C.G. Rhodes, J.G. Flintoff, R.A. Spurling, W.H. Bingle: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1955–6410.1007/s11661-998-0021-5 ↗
4. W.M. Thomas, E.D. Nicholas: Mater. Des., 1997, vol. 18, pp. 269–7310.1016/S0261-3069(97)00062-9 ↗
5. R.S. Mishra, M.W. Mahoney, S.X. McFadden, N.A. Mara, A.K. Mukherjee: Scripta Mater., 1999, vol. 42, pp. 163–6810.1016/S1359-6462(99)00329-2 ↗
6. P.B. Berbon, W.H. Bingel, R.S. Mishra, C.C. Bampton, and M.W. Mahoney: Scripta Mater., 2001, vol. 44, pp. 61–6610.1016/S1359-6462(00)00578-9 ↗
7. Z.Y. Ma, R.S. Mishra, M.W. Mahoney: Acta Mater., 2002, vol. 50, pp. 4419–3010.1016/S1359-6454(02)00278-1 ↗
8. J.Q. Su, T.W. Nelson, C.J. Sterling: J. Mater. Res., 2003, vol. 18, pp. 1757–6010.1557/JMR.2003.0243 ↗
9. J.Q. Su, T.W. Nelson, C.J. Sterling: Scripta Mater., 2005, vol. 52, pp. 135–4010.1016/j.scriptamat.2004.09.014 ↗
10. R.Z. Valiev, R.K. Islamgaliev, I.V. Alexandrov: Progr. Mater. Sci., 2000, vol. 45, pp. 103–8910.1016/S0079-6425(99)00007-9 ↗
11. T.W. Nelson, R.J. Steel, W.J. Arbegast: Sci. Technol. Welding Joining, 2003, vol. 8, pp. 283–8810.1179/136217103225011005 ↗
12. C. Genevois, A. Deschamps, A. Denquin, B. Doisneau-Cottignies: Acta Mater., 2005, vol. 53, pp. 2447–5810.1016/j.actamat.2005.02.007 ↗
13. W. Woo, H. Choo, D.W. Brown, Z. Feng, P.K. Liaw, and S.C. Vogel, Acta Mater., 2006, vol. 54, pp. 3871–82.10.1016/j.actamat.2006.04.018 ↗
14. W. Woo, H. Choo, D.W. Brown, Z. Feng, P.K. Liaw: Scripta Mater., 2006, vol. 54, pp. 1859–6410.1016/j.scriptamat.2006.02.019 ↗
15. M. Peel, A. Steuwer, M. Preuss, P.J. Withers: Acta Mater., 2003, vol. 51, pp. 4791–480110.1016/S1359-6454(03)00319-7 ↗
16. A.P. Reynolds, W. Tang, T. Gnaupel-Herold, H. Prask: Scripta Mater., 2003, vol. 48, pp. 1289–9410.1016/S1359-6462(03)00024-1 ↗
17. W. Woo, H. Choo, D.W. Brown, Z. Feng, and P.K. Liaw: Mater. Sci. Eng. A, 2006, vol. 437, p. 6410.1016/j.msea.2006.04.066 ↗
18. G.A. Edwards, K. Stiller, G.L. Dunlop, M.J. Couper: Acta Mater., 1998, vol. 46, pp. 3893–390410.1016/S1359-6454(98)00059-7 ↗
19. Y.S. Sato, H. Kokawa, M. Enomoto, S. Jogan: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2429–3710.1007/s11661-999-0251-1 ↗
20. Y.S. Sato, H. Kokawa, M. Enomoto, S. Jogan, T. Hasimoto: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3125–3010.1007/s11661-999-0223-5 ↗
21. ASM Handbook, vol. 6, Welding, Brazing, and Soldering, ASM INTERNATIONAL, Materials Park, OH, 2003
22. G. Albertini, G. Bruno, B.D. Dunn, F. Fiori, W. Reimers, and J.S. Wright: Mater. Sci. Eng. A, 1997, vol. 224, pp. 157–6510.1016/S0921-5093(96)10546-3 ↗
23. D.G. Carr, M.I. Ripley, T.M. Holden, D.W. Brown, and S.C. Vogel: Acta Mater., 2004, vol. 52, pp. 4083–9110.1016/j.actamat.2004.05.021 ↗
24. C.G. Windsor: Pulsed Neutron Scattering, Taylor and Francis, London, 1981
25. M.A.M. Bourke, D.C. Dunand, E. Ustundag: Appl. Phys. A, 2002, vol. 74, pp. S1707–S170910.1007/s003390201747 ↗
26. A.C. Larson and R.B. Von Dreele: General Structure Analysis System (GSAS), Los Alamos National Laboratory Report LAUR, Los Alamos, NM, 2004, pp. 86–748
27. T.U. Seidel, A.P. Reynolds: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2879–8410.1007/s11661-001-1038-1 ↗
28. L.E. Murr, G. Liu, J.C. McClure: J. Mater. Sci., 1998, vol. 33, pp. 1243–5110.1023/A:1004385928163 ↗
29. M.Z.H. Khandkar, J.A. Khan, A.P. Reynolds: Sci. Technol. Welding Joining, 2003, vol. 8, pp. 165–7510.1179/136217103225010943 ↗
30. R.V. Preston, H.R. Shercliff, P.J. Withers, S. Smith: Acta Mater., 2004, vol. 52, pp. 4973–8310.1016/j.actamat.2004.06.048 ↗
31. M.A. Sutton, A.P. Reynolds, D.Q. Wang, C.R. Hubbard: J. Eng. Mater. Technol., 2002, vol. 124, pp. 215–21.10.1115/1.1429639 ↗
32. W. Woo, H. Choo, D.W. Brown, Z. Feng, P.K. Liaw, S.A. David, C.R. Hubbard, M.A.M. Bourke: Appl. Phys. Lett., 2005, vol. 86, p. 23190210.1063/1.1944207 ↗
33. S. Esmaelil, D.J. Lloyd, W.J. Poole: Acta Mater., 2003, vol. 51, pp. 3467–8110.1016/S1359-6454(03)00167-8 ↗
34. G. Mrówka-Nowotnik, J. Sieniawski: J. Mater. Proc. Technol., 2005, vol. 162, pp. 367–72.10.1016/j.jmatprotec.2005.02.115 ↗