journal article·2007-05

Role of Crystallographic Texture in Hydrogen-Induced Cracking of Low Carbon Steels for Sour Service Piping

V. Venegas, F. Caleyo, J.M. Hallen, T. Baudin, R. Penelle

Publisher page

Abstract

This work presents the results of ongoing investigations aimed at determining the influence of crystallographic texture on hydrogen-induced cracking (HIC) in low carbon steels for sour service piping. Electron backscatter diffraction (EBSD) and X-ray texture measurements have been performed on HIC samples of API 5L X46 and ASTM A106 steels. The results obtained in this study show that the resistance to HIC of low carbon steels for sour service piping could be improved through crystallographic texture control and grain boundary engineering. Controlled rolling schedules can be proposed in order to induce a crystallographic texture dominated by the {112}//ND, {111}//ND, and {011}//ND fibers, where ND is the sample normal direction. Such a texture is expected to decrease significantly the steel susceptibility to HIC by (1) reducing the number of available transgranular and intergranular low resistance cleavage paths provided by the {001}//ND oriented grains, (2) reducing the probability of crack coalescence and stepwise HIC propagation through large HIC-induced plastic strain, and (3) increasing the number of high resistance intergranular crack paths provided by coincidence site lattice (CSL) boundaries and low-angle boundaries between grains with orientation within the {111}//ND texture fiber.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Non-Destructive Testing Techniques · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. M. lboujdaini: Uhlig’s Corrosion Handbook, 2nd ed., R. Winston Revie, ed., John Wiley & Sons Inc., New York, NY, 2000, pp. 205–20
2. T. Hara, H. Asahi, H. Ogawa: Corrosion, 2004, vol. 60 (12), pp. 1113–2110.5006/1.3299225 ↗
3. E. Miyoshi, T. Tanaka, F. Terasaki, A. Ikeda, J. Eng. Ind., 1976, vol. 11, pp. 1221–3010.1115/1.3439090 ↗
4. J.I. Verdeja, J. Asensio, J.A. Pero-Sanz: Mater. Charact., 2003, vol. 50, pp. 81–8610.1016/S1044-5803(03)00106-2 ↗
5. T.G. Oakwood: Metal Handbook, 9th ed., vol. 13, Corrosion, ASM INTERNATIONAL, Materials Park, OH, 1987, pp. 531–46
6. R.D. Kane and M.S. Cayard: Review of Publisher Literature on Wet H2S Cracking of Steels through 1989, NACE International Publication 8X294, 2003 ed., NACE, Houston, TX, 2003
7. V. Randle, O. Engler: Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping, Francis & Taylor, London, 2003, pp. 3–58
8. A.J. Wilkinson: Phil. Mag. A, 2001, vol. 81 (4), pp. 841–5510.1080/01418610151133276 ↗
9. U. Krupp, O. Duber, H.J. Christ, B. Kunkler, A. Schick, C.P. Fritzen: J. Microsc., 2003, vol. 213 (3), pp. 313–2010.1111/j.0022-2720.2004.01306.x ↗
10. R.K. Ray, J.J. Jonas, M.P. Butrón-Guillén, J. Savoie: ISIJ Int., 1994, vol. 34, pp. 927–4210.2355/isijinternational.34.927 ↗
11. S.P. Lynch: in Hydrogen Effects on Materials Behavior and Corrosion Deformation Interaction, N.R. Moody, A.W. Thompson, R.E. Ricker, G.W. Was, R.H. Jones, eds., TMS, Warrendale, PA, 2003, pp. 440–66
12. OIM Users Manual, 2001 ed., TexSeM Laboratories Inc., Provo, UT, 2001, pp. 48–49
13. Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking, NACE Standard Test Method TM0284-96, NACE, Houston, TX, 1997, pp. 1–10
14. K. Pawlick: Phys. Status Solidi, 1986, vol. B134, pp. 477–8310.1002/pssb.2221340205 ↗
15. Y.Z. Wang, J.D. Atkinson, R. Akid, R.N. Parkins: Fatigue Fract. Eng. Mater. Struct., 1996, vol. 19, pp. 427–3910.1111/j.1460-2695.1996.tb00979.x ↗
16. D. Gross, T. Seelig: Fracture Mechanics, Springer-Verlag, Berlin, 2006, pp. 64–87
17. Y.P. Li, C.H. Yang: J. Mech. Mater. Struct., 2006, vol. 1 (1), pp. 147–62.10.2140/jomms.2006.1.147 ↗
18. V. Venegas, F. Caleyo, J.L. González, T. Baudin, J.M. Hallen, R. Penelle: Scripta Mater., 2005, vol. 52, pp. 147–5210.1016/j.scriptamat.2004.09.015 ↗
19. M.A. Othon, L.N. Brewer, L.M. Young, T.M. Angeliu: Microsc. Microanal., 2002, vol. 8 (S02), pp. 698–9910.1017/S1431927602106490 ↗
20. C.C. Yang, A.D. Rollet, W.W. Mullins: Scripta Mater., 2001, vol. 44, pp. 2735–7410.1016/S1359-6462(01)00960-5 ↗
21. A. Haldar, R.K. Ray: Mater. Sci. Eng. A, 2005, vol. A391 (1–2), pp. 402–0710.1016/j.msea.2004.09.014 ↗