Liquation Microfissuring in the Weld Heat-Affected Zone of an Overaged Precipitation-Hardened Nickel-Base Superalloy
Source abstract
Abstract
The effect of preweld overaging heat treatment on the microstructural response in the heat-affected zone (HAZ) of a precipitation-hardened nickel-base superalloy INCONEL 738LC subjected to the welding thermal cycle (i.e., rapid) was investigated. The overaging heat treatment resulted in the formation of an interfacial microconstituent containing M23X6 particles and coarsening of primary and secondary γ′ precipitates. The HAZ microstructures around welds in the overaged alloy were simulated using the Gleeble thermomechanical simulation system. Microstructural examination of simulated HAZs and those present in tungsten inert gas (TIG) welded specimens showed the occurrence of extensive grain boundary liquation involving liquation reaction of the interfacial microconstituents containing M23X6 particles and MC-type carbides. In addition, the coarsened γ′ precipitate particles present in the overaged alloy persisted well above their solvus temperature to temperatures where they constitutionally liquated and contributed to considerable liquation of grain boundaries, during continuous rapid heating. Intergranular HAZ microfissuring, with resolidified product formed mostly on one side of the microfissures, was observed in welded specimens. This suggested that the HAZ microfissuring generally occurred by decohesion across one of the solid-liquid interfaces during the grain boundary liquation stage of the weld thermal cycle. Correlation of simulated HAZ microstructures with hot ductility properties of the alloy revealed that the temperature at which the alloy exhibited zero ductility during heating was within the temperature range at which grain boundary liquation was observed. The on-cooling ductility of the alloy was significantly damaged by the on-heating liquation reaction, as reflected by the considerably low ductility recovery temperature (DRT). Important characteristics of the intergranular liquid that could influence HAZ microfissuring of the alloy in overaged condition are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. M. Prager and C.S. Shira: Welding Research Council Bulletin No. 128, Welding Research Council, 1968
2. M.H. Haafkens, G.H. Matthey: Welding J., 1982, vol. 61, p. 25
3. R. Thamburaj, W. Wallace, J.A. Goldak: Int. Met. Rev., 1983, vol. 28, p. 110.1179/imr.1983.28.1.1 ↗
4. T.J. Kelly: Proc. Symp. on Weldability of Materials, Detroit, MI, Oct. 1990, R.A. Patterson, K.W. Mahin, eds., ASM INTERNATIONAL, Materials Park, OH, 1990, pp. 151–57
5. G. Cam, M. Kocak: Int. Mater. Rev., 1998, vol. 43, pp. 1–4410.1179/imr.1998.43.1.1 ↗
6. A. Thakur, N.L. Richards, M.C. Chaturvedi: Int. J. Joining Mater., 2003, vol. 15, p. 21
7. D.S. Duvall, W.A. Owczarski: Weld. J. Supp., 1969, vol. 48, p. 10s
8. Gleeble 1500, Duffers Scientific, Inc., Troy, NY
9. J.H. Westbrook: Z. Kristallogr., 1958, vol. 110, p. 2110.1524/zkri.1958.110.1-6.21 ↗
10. O.A. Ojo, N.L. Richards, M.C. Chaturvedi: J. Mater. Sci., 2004, vol. 39, pp. 7401–0410.1023/B:JMSC.0000048761.32712.eb ↗
11. R. Vincent: Acta Metall., 1985, vol. 33, p. 120510.1016/0001-6160(85)90231-7 ↗
12. W. Hoffelner, E. Kny, R. Stickler, W.J. McCall: Z. Werktofftech., 1979, vol. 10, p. 8410.1002/mawe.19790100307 ↗
13. L. Ouichou, F. Lavaud, G. Lesoult: Superalloys 1980, ASM, Metals Park, OH, 1980, p. 235
14. Superalloys II, C.T. Sims, N.S. Stoloff, and W.C. Hagel, eds., A Wiley-Interscience Publication, John Wiley & Sons Inc., New York, NY, 1987
15. Y.L. Ge, J.Y. Wang: Praktische Metallographie, 1983, vol. 20 (11), p. 554
16. V.P. Demyantsevich: Welding Prod., 1967, vol. 14, p. 1
17. D.H. Maxwell, J.F. Baldwin, J.F. Radavich: Metall. Met. Forming, 1975, p. 332
18. H.J. Goldschmidt: J. Iron Steel Inst., 1971, vol. 209, p. 910
19. W. Chen, M.C. Chaturvedi, N.L. Richards, G. McMahon: Metall. Mater. Trans. A, 1998, vol. 29A, p. 194710.1007/s11661-998-0020-6 ↗
20. X. Huang, M.C. Chaturvedi, N.L. Richards, J. Jackman: Acta Mater., 1997, vol. 45, p. 309510.1016/S1359-6454(97)00017-7 ↗
21. H. Guo, M.C. Chaturvedi, N.L. Richards, G.S. McMahon: Scripta Mater., 1999, vol. 40, p. 38310.1016/S1359-6462(98)00427-8 ↗
22. R.M. Kruger, G.S. Was: Metall. Trans. A, 1988, vol. 19A, p. 255510.1007/BF02645483 ↗
23. B. Hu, H. Li: Proc. Superalloys 1980 Conf., Champion, PA, 1980, p. 423
24. K.G. Carroll, L.S. Darken, E.W. Filer, L. Zwell: Nature, 1954, vol. 174, p. 97810.1038/174978a0 ↗
25. K.M. Delargy, G.D.W. Smith: Metall. Trans. A, 1983, vol. 14A, p. 177110.1007/BF02645547 ↗
26. R.F. Decker: in Source Book on Materials for Elevated Temperature Applications, E.F. Bradley, ed., ASM, Metals Park, OH, 1979, pp. 275–98
27. W.A. Owczarski: Welding Research Council, New York, NY, 1969, p. 6
28. W. Chen, M.C. Chaturvedi, N.L. Richards: Metall. Mater. Trans. A, 2001, vol. 32A, p. 93110.1007/s11661-001-0350-0 ↗
29. J.J. Pepe, W.F. Savage: Welding J., 1967, vol. 46, p. 411-s
30. R. Nakkalil, N.L. Richards, M.C. Chaturvedi: Metall. Trans. A, 1993, vol. 24A, p. 116910.1007/BF02657248 ↗
31. B. Radhakrishnan, R.G. Thompson: Metall. Trans. A, 1993, vol. 24A, p. 140910.1007/BF02668209 ↗
32. W.A. Owczarski, D.S. Duvall, C.P. Sullivan: Weld. J., 1966, vol. 45, p. 145-s
33. O.A. Ojo, N.L. Richards, M.C. Chaturvedi: Scripta Mater., 2004, vol. 50, p. 64110.1016/j.scriptamat.2003.11.025 ↗
34. M.J. Whelan: Met. Sci. J., 1969, vol. 3, p. 9510.1179/msc.1969.3.1.95 ↗
35. J. Agren: Scand. J. Metall., 1990, vol. 19, p. 2
36. J.W. Christian: The Theory of Phase Transformations in Metals and Alloys, Pergamon Press, Oxford, United Kingdom, 1975
37. B.I. Bjorneklett, O. Grong, O.R. Myhr, A.O. Kluken: Acta Mater., 1998, vol. 46, p. 625710.1016/S1359-6454(98)00260-2 ↗
38. M. Soucail, Y. Bienvenu: Mater. Sci. Eng. A, 1996, vol. 220, p. 21510.1016/S0921-5093(97)80011-1 ↗
39. M.F. Ashby, K.E. Easterling: Acta Metall., 1982, vol. 30, pp. 1969–7810.1016/0001-6160(82)90100-6 ↗
40. C.S. Smith: Trans. AIME, 1948, vol. 175, p. 15
41. I.A. Aksay, C.E. Hoge, J.A. Pask: J. Phys. Chem., vol. 78, p. 117810.1021/j100605a009 ↗
42. D. Chatain, E. Rabkin, J. Derenne, J. Bernardin: Acta Mater., 2001, vol. 49, p. 112310.1016/S1359-6454(01)00039-8 ↗
43. E.M. Lehockey, G. Palumbo, P. Lin: Metall. Mater. Trans. A, 1998, vol. 29A, p. 306910.1007/s11661-998-0214-y ↗
44. H. Kokawa, C.H. Lee, T.H. North: Metall. Trans. A, 1991, vol. 22A, p. 162710.1007/BF02667375 ↗
45. G. Bailey, H. Watkins: J. Inst. Met., 1951, vol. 80, p. 57
46. R.H. Phillips, M.F. Jordan: Met. Technol., 1977, vol. 4, p. 39610.1179/030716977803292538 ↗
47. W. Lin, J.C. Lippold, W.A. Baeslack III: Welding J., 1993, p. 135s
48. W. Lin, T.W. Nelson, J.C. Lippold, W.A. Baeslack III: International Trends in Welding Science and Technology, Gatlinburg, TN, 1993 p. 695
49. O.A. Ojo, N.L. Richards, M.C. Chaturvedi: Scripta Mater., 2004, vol. 51, p. 14110.1016/j.scriptamat.2004.03.040 ↗
50. W.A. Miller, G.A. Chadwick: Acta Metall., 1967, vol. 15, p. 60710.1016/0001-6160(67)90104-6 ↗
51. T.W. Clyne, G.J. Davies: TMA Proc. Int. Conf. Solidification, Sheffield, United Kingdom, p. 275
52. Y. Arata, F. Matsuda, S. Katayama: Trans. JWRI, 1977, p. 623
53. C.E. Cross, W.T. Tack, and L.W. Loechel: Proc. Materials Weldability Symp., Detroit, MI, Oct. 1990, ASM INTERNATIONAL, Metals Park, OH.
54. J.C. Borland: Welding Met. Fabrication, 1979, vol. 47, p. 99
55. S. Hier-Majumder, P.H. Leo, D.L. Kohlstedt: Acta Mater., 2004, vol. 52, p. 342510.1016/j.actamat.2004.03.040 ↗
56. E. Pereiro-Lopez, W. Ludwig, D. Bellet: Acta Mater., 2004, vol. 52, p. 32110.1016/j.actamat.2003.09.017 ↗
57. W.S. Pellinni: Foundry, 1952, vol. 125, pp. 124, 192, 194, 196, 199
58. J.C. Borland: Br. Welding J., 1960, vol. 7, p. 508
59. J.C. Borland: Welding Met. Fabrication, 1979, vol. 47, p. 19
60. O.A. Ojo: Ph.D. Dissertation, University of Manitoba, Winnipeg, 2004