journal article·2004-08

Effect of low-frequency electromagnetic casting on the castability, microstructure, and tensile properties of direct-chill cast Al-Zn-Mg-Cu alloy

Jie Dong, Zhihao Zhao, Jianzhong Cui, Fuxiao Yu, Chunyan Ban

Publisher page

Abstract

Microstructure and grain boundary segregation of the direct-chill (DC) cast Al-Zn-Mg-Cu (7A60) alloy, with and without low-frequency electromagnetic field, were investigated. The surface quality, hot-tearing tendency, and tensile properties of the ingots manufactured by DC and low-frequency electromagnetic field casting (LFEC) were compared. The results show that LFEC significantly improves the surface quality and reduces the hot-tearing tendency of DC ingots. It is possible to generate a fine, uniform, and equiaxed microstructure with LFEC. Under optimum conditions, the average grain size varies from 30 µm near the surface to 45 µm at the center of the LFEC ingots. Decreasing electromagnetic frequency or increasing intensity significantly refines microstructure, suppresses grain boundary segregation, and increases as-cast fracture strength and elongation. In the range of frequency and ampere turns employed in the experiments, the optimum frequency is found to be 15 to 25 Hz and the number of ampere turns to be 18,000 to 20,000 At.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. T.M. Osman, P.M. Singh, and J.J. Lewandowski: Scripta Metall. Mater. 1994, vol. 31, pp. 607–12.10.1016/0956-716X(94)90152-X ↗
2. A.B. Pandey, B.S. Majumdar, and D.B. Miracle: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1237–43.10.1007/s11661-998-0250-7 ↗
3. H. Adachi, K. Osamura, S. Ochiai, J. Kusui, and K. Yokoe: Scripta Mater., 2001, vol. 44, pp. 1489–92.10.1016/S1359-6462(01)00715-1 ↗
4. C.G. Li, S.J. Wu, S.L. Dai, and S.J. Yang: Chin. J. Nonferrous Met. (Special), 2002, vol. 12, pp. 14–21.
5. C.Q. Chen: Chin. J. Nonferrous Met. (Special), 2002, vol. 12, pp. 22–27.
6. Y.L. Wu, F.H. Froes, A. Alvarez, C.G. Li, and J. Liu: Mater. Design, 1997, vol. 18, pp. 211–15.10.1016/S0261-3069(97)00084-8 ↗
7. J. Kusui, K. Fujii, K. Yokoe, T. Yokote, K. Osamura, O. Kubota, and H. Okuda: Mater. Sci. Forum, 1996, pp. 217–22.10.4028/www.scientific.net/MSF.217-222.1823 ↗
8. Q. Wei, B.Q. Xiong, Y.A. Zhang, B.H. Zhu, and L.K. Shi: Trans. Nonferrous Met. Soc. China (English Ed.), 2001, vol. 11, pp. 258–61.
9. G.I. Eskin, G.S. Makarov, and Yu. P. Pimenov: Adv. Performance Mater., 1995, vol. 21, pp. 43–50.10.1007/BF00711650 ↗
10. B.J. Zhang, J.Z. Cui, G.M. Lu, Q. Zhang, and C.Y. Ban: Acta Metall. Sinica, 2002, vol. 38, pp. 215–19.
11. Vives Charles: Metall. Trans. B, 1989, vol. 20B, pp. 623–29.10.1007/BF02655919 ↗
12. Vives Charles: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 457–64.10.1007/BF02914910 ↗
13. P. Desnian, F. Durand, Y. Fautrelle, D. Bloch, J.I. Meyer, and J.P. Riquet: Light Metals, TMS, Metals Park, OH, 1988, pp. 487–93.
14. A. Radjia and K. Miwa: Metall. Mater. Trans, A, 2000, vol. 31A, pp. 755–62.10.1007/s11661-000-0017-2 ↗
15. Z. Li and B. Wu: Foundry (Hiaa), 1997, vol. 10, pp. 1–5.
16. Sung-Chul Lim, Eui-pak Yon, and Jung-Sik Kim: J. Mater. Sci. Lett., 1997, vol. 16, pp. 104–09.10.1023/A:1018525506838 ↗
17. C. Vives: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 445–55.10.1007/BF02914909 ↗
18. C. Vives: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 457–64.10.1007/BF02914910 ↗
19. C.J. Paradies, R.N. Smith, and M.E. Glichsman: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 875–83.10.1007/s11661-997-0075-9 ↗
20. J. Pilling and A. Hellawell: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 239–32.
21. M.D. Sahu and V.A. Gadgil: Br. Foundrymen, 1997, vol. 70, pp. 89–92.
22. R. Ambarder, D.G.R. Sharma, and O. Pravaka: Trans. IIM, 1994, vol. 47, pp. 131–37.
23. F. GE, S. Huo, and Y. Tang: AFS Trans., 1988, vol. 96, pp. 521–24.
24. C. Vives and R. Ricou: Metall. Trans. B, 1985, vol. 16B, pp. 377–86.10.1007/BF02679730 ↗
25. J. Dong, J.Z. Cui, and Q.C. Le: Mater. Sci. Eng. A, 2003, vol. 345A, pp. 234–42.10.1016/S0921-5093(02)00473-2 ↗