Directional and single-crystal solidification of Ni-base superalloys: Part I. The role of curved isotherms on grain selection
Source abstract
Abstract
The development of crystallographic texture during directional solidification has been quantitatively analyzed in columnar castings of the Ni-base superalloys, CMSX4 and CM186LC, produced with a range of cooling rates and liquidus front curvatures. It is proposed that the more diffuse crystallographic texture developed in CMSX4 relative to CM186LC results from a combination of the differing local orientation stability condition and the alloys’ solidification characteristics. The implications of these additional factors on the evolution of the axial grain texture, the grain orientations produced in singlecrystal processing, and the stability of spurious grains in processing CMSX4 are discussed. An experimental method is presented to quantitatively analyze the grain selection process in the case of curved liquidus isotherms by retaining the stereology of the primary 〈001〉 dendrite growth direction and the local thermal gradient vector. This can account for the stability of spuriously nucleated edge grains in a single-crystal matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · High Temperature Alloys and Creep · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. F.L. Versnyder and M.E. Shank: Mater. Sci. Eng., 1970, vol. 6, pp. 213–47.10.1016/0025-5416(70)90050-9 ↗
2. D. Walton and B. Chalmers: Trans. TMS-AIME, 1959, vol. 215, pp. 447–56.
3. S.-C. Huang and M.E. Glicksman: Acta Metall., 1981, vol. 29, pp. 701–15.10.1016/0001-6160(81)90115-2 ↗
4. A.J. Goss: Proc. Phys. Soc., 1953, vol. B116, pp. 525–32.10.1088/0370-1301/66/7/301 ↗
5. D.N. Lee, K.-H. Kim, Y. Lee, and C.-H. Choi: Mater. Chem. Phys., 1997, vol. 47, pp. 154–58.10.1016/S0254-0584(97)80044-2 ↗
6. P.N. Quested and M. McLean: Mater. Sci. Eng., 1984, vol. 65, pp. 171–80.10.1016/0025-5416(84)90210-6 ↗
7. C.-A. Gandin and M. Rappaz: in Materials Processing in the Computer Age—2, V. Voller, S.P. Marsh, and N. El-Kaddah, eds., TMS, Warrendale, PA, 1995, pp. 117–28.
8. C.-A. Gandin, M. Rappaz, D. West, and B.L. Adams: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1543–52.10.1007/BF02647605 ↗
9. P. Carter, D.C. Cox, C.-A. Gandin, and R.C. Reed: Mater. Sci. Eng. A, 2000, vol. 280, pp. 233–46.10.1016/S0921-5093(99)00701-7 ↗
10. A. Mitchell: Proc. Materials Engineering in Turbines and Compressors, Charles Parson’s Turbine Conf., A. Strang, ed., Institute of Materials, Newcastle, 1995, pp. 547–55.
11. X. Xu, R.C. Atwood, S. Sridhar, P.D. Lee, B. Drummings, R.M. Ward, and M. H. Jacobs: Int. Symp. on Liquid Metal Processing and Casting, A. Mitchell, L. Ridgeway, and M. Baldwin, eds., American Vacuum Society, Santa Fe, 1999, NM, pp. 76–89.
12. L. Nastac, S. Sunderraj, K.-O. Yu, and Y. Pang: J. Met., 1998, pp. 30–35.10.1007/s11837-998-0376-5 ↗
13. R.M. Ward, T.P. Johnson, and M.H. Jacobs: Int. Symp. on Liquid Metal Processing and Casting, A. Mitchell and P. Auburtin, eds., American Vacuum Society, Santa Fe, NM, 1997, pp. 97–109.
14. J.D. Hunt: Solidification and Casting of Metals, The Metals Society, London, 1979, pp. 3–9.
15. T.M. Pollock and W.H. Murphy: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1081–94.10.1007/BF02649777 ↗
16. V. Randle: Microtexture Determination and Its Applications, The Institute of Materials, London, 1992, p. 82.