journal article·2006-01

Precipitation of Fe2W laves phase and modeling of its direct influence on the strength of a 12Cr-2W steel

Qiang Li

Publisher page

Abstract

Precipitation of Fe2W Laves phase in a 12Cr-2W power plant steel is investigated by using transmission electron microscopy (TEM). Fe2W Laves phase is found to be coherent with the matrix and has a stacking fault structure. The influence of formation of Fe2W Laves phase on the yield strength of the steel is quantitatively evaluated. The modeling result indicates that the strengthening effect from the formation of Laves phase particles is diminished by the loss of solid solution strengthening of alloying elements, and, as a result, the strength of the steel remains similar. The effect of clustering and coarsening of Laves precipitates on the strength of the steel is also studied. It is showed that clustering and coarsening decreases the strengthening effect of Laves phase. The limitation of the modeling approach currently adopted is also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical and Alloy Processes · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. F. Abe, T. Noda, and M. Okada: J. Nucl. Mater., 1992, vol. 195, pp. 51–67.10.1016/0022-3115(92)90363-P ↗
2. S. Kunimitsu, Y. You, N. Kasuya, Y. Sasaki, and Y. Hosoi: J. Nucl. Mater., 1991, vol. 179, pp. 689–92.10.1016/0022-3115(91)90182-7 ↗
3. L. Schafer: J. Nucl. Mater., 2000, vol. 283, pp. 707–10.10.1016/S0022-3115(00)00115-X ↗
4. M. Tamura, H. Hayakawa, A. Yoshitake, A. Hishinuma, and T. Kondo: J. Nucl. Mater., 1988, vol. 155, pp. 620–25.10.1016/0022-3115(88)90384-4 ↗
5. T. Ishii, K. Fukaya, Y. Nishiyama, M. Suzuki, and M. Eto: J. Nucl. Mater., 1998, vol. 263, pp. 1183–86.10.1016/S0022-3115(98)00183-4 ↗
6. P. Fernandez, M. Hernandez-Mayoral, J. Lapena, A.M. Lancha, and G. De Diego: Mater. Sci. Technol., 2002, vol. 18, pp. 1353–62.10.1179/026708302225007411 ↗
7. M. Sato, Y. Hasegawa, T. Muraki, and K. Maruyama: J. Jpn. Inst. Met., 2000, vol. 64, pp. 371–74.10.2320/jinstmet1952.64.5_371 ↗
8. K. Sawada, M. Takeda, K. Maruyama, R. Ishii, M. Yamada, Y. Nagae, and R. Komine: Mater. Sci. Eng. A, 1999, vol. 267, pp. 19–25.10.1016/S0921-5093(99)00066-0 ↗
9. K. Miyata, Y. Sawaragi, H. Okada, F. Masuyama, T. Yokoyama, and N. Komai: Iron Steel Inst. Jpn. Int., 2000, vol. 40, pp. 1156–63.10.2355/isijinternational.40.1156 ↗
10. Y. Tsuchida, K. Okamoto, and Y. Tokunaga: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 317–23.10.2355/isijinternational.35.317 ↗
11. S. Muneki, M. Igarashi, and F. Abe: Key Eng. Mater., 2000, vol. 171, pp. 491–98.
12. T. Hasegawa, Y.R. Abe, Y. Tomita, N. Maruyama, and M. Sugiyama: Iron Steel Inst. Jpn. Int., 2001, vol. 41, pp. 922–29.10.2355/isijinternational.41.922 ↗
13. F. Abe: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 770–73.10.1016/S0921-5093(00)02002-5 ↗
14. J. Hald: in Modeling of Microstructural Evolution in Creep Resistant Materials, A. Strang and M. McLean, eds., IOM Communications Ltd., London, 1999, pp. 1–14.
15. B. Nath, E. Metcalfe, and J. Hald: in Microstructural Development and Stability in High Chromium Ferritic Power Plant Steels, A. Strang and D.J. Gooch, eds., IOM Communications Ltd., London, 1997, pp. 123–44.
16. L.M. Lundin: Scripta Mater., 1996, vol. 34, pp. 741–47.10.1016/1359-6462(95)00569-2 ↗
17. P. Bianchi, P. Bontempi, A. Benvenuti, and N. Ricci: in Microstructural Stability of Creep Resistant Alloys for High Temperature Plant Applications, A. Strang, J. Cawley, and G.W. Greenwood, eds., IOM Communications Ltd., 1998, London, pp. 107–16.
18. A.K. Sinha and W. Hume-Rothery: J. Iron Steel Inst., 1967, vol. 205, pp. 1145–49.
19. P. Villars and L.D. Calvert: Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, ASM, Metals Park, OH, 1985.
20. D.A. Porter and K.E. Easter Ling: Phase Transformation in Metals and Alloys, Van Nostrand Reinhold, New York, NY, 1981, pp. 326–32.
21. S.M. Hodson: MTDATA—Metallurgical and Thermodynamic Databank, National Physical Laboratory, Teddington, United Kingdom, 1989.
22. J.D. Robson: Ph.D. Thesis, University of Cambridge, Cambridge, United Kingdom, 1996.
23. A.T. Dinsdale: CALPHAD, 1991, vol. 15, pp. 317–425.10.1016/0364-5916(91)90030-N ↗
24. J. Hald: in EPRI/National Power Conf. on New Steels for Advanced Plant up to 620 C, E. Metcalfe, ed., London, 1995, pp. 152–73.
25. M. Schwind, M. Hattestrand, and H.O. Andren: in Microstructural Stability of Creep Resistant Alloys for High Temperature Plant Applications, A. Strang, J. Cawley, and G.W. Greenwood, eds., IOM Communications Ltd., London, 1998, pp. 197–213.
26. C.E. Lacy and M. Gensamer: Trans. Am. Soc. Met., 1944, vol. 32, pp. 88–105.
27. S. Maropoulos, J.D.H. Paul, and N. Ridley: Mater. Sci. Technol., 1993, vol. 9, pp. 1014–19.10.1179/mst.1993.9.11.1014 ↗
28. T. Gladman, I.D. Mcivor, and D. Dulieu: Proc. Int. Conf. on High Strength Low Alloy Steels “Microalloying 75” 1977, Union Carbide, New York, NY, 1977, pp. 32–55.
29. T.N. Baker: in Yield, Flow and Fracture of Polycrystals, T.N. Baker, ed., Applied Science, London, 1983, pp. 235–73.
30. J. Irvine and T.N. Baker: Mater. Sci. Eng., 1984, vol. 64, p. 123.10.1016/0025-5416(84)90079-X ↗
31. U.F. Kocks, A.S. Argon, and M.F. Ashby: Progr. Mater. Sci., 1975, vol. 19, pp. 156–249.
32. U.F. Kocks: Proc. 5th Int. Conf. on “Strength of metals and alloys”, P. Haasen, V. Gerold, and G. Kostorz, eds., Pergamon Press, Oxford, United Kingdom, 1979, vol. 3, pp. 1661–80.10.1016/B978-1-4832-8412-5.50250-2 ↗
33. Q. Li: Mater. Sci. Eng. A, 2003, vol. 361, pp. 395–401.
34. K. Hanson and J.W. Morris, Jr.: J. Appl. Phys., 1975, vol. 46, p. 2378.10.1063/1.321917 ↗
35. R. Labusch: Verh. Deut. Phys. Ges., 1979, vol. 1, p. 222.
36. Q. Li: Ph.D. Thesis, University of Cambridge, United Kingdom, 1998.
37. M.F. Ashby and R. Ebelling: Trans. TMS-AIME, 1966, vol. 236, pp. 1397–405.
38. J.J. Lewandowski, C. Liu, and W.H. Hunt: Mater. Sci. Eng. A, 1989, vol. 107, pp. 241–55.10.1016/0921-5093(89)90392-4 ↗
39. W.H. Hunt, O. Richmond, and R.D. Young: Proc. ICCM6/ECCM2 (1987), London, F.J. Mathews, N.C.R., Buskell, J.M. Hodgkinson, and E. Morton, eds., Elsevier, New York, NY, 1987, vol. 2, pp. 209–23.
40. D. Llord: Acta Metall., 1991, vol. 39, pp. 59–71.10.1016/0956-7151(91)90328-X ↗
41. F. Abe: Key Eng. Mater., 2000, vol. 171, pp. 395–402.10.4028/www.scientific.net/KEM.171-174.395 ↗