journal article·2013-08

The Effect of the Initial Microstructure on Recrystallization and Austenite Formation in a DP600 Steel

M. Kulakov, W. J. Poole, M. Militzer

Publisher page

Abstract

The effects of initial microstructure and thermal cycle on recrystallization, austenite formation, and their interaction were studied for intercritical annealing of a low-carbon steel that is suitable for industrial production of DP600 grade. The initial microstructures included 50 pct cold-rolled ferrite–pearlite, ferrite–bainite–pearlite and martensite. The latter two materials recrystallized at similar rates, while slower recrystallization was observed for ferrite–pearlite. If heating to an intercritical temperature was sufficiently slow, then recrystallization was completed before austenite formation, otherwise austenite formed in a partially recrystallized microstructure. The same trends as for recrystallization were found for the effect of initial microstructure on kinetics of austenite formation. The recrystallization–austenite formation interaction accelerated austenization in all the three starting microstructures by providing additional nucleation sites and enhancing growth rates, and drastically altered morphology and distribution of austenite. In particular, for ferrite–bainite–pearlite and martensite, the recrystallization–austenite formation interaction resulted in substantial microstructural refinement. Recrystallization and austenite formation from a fully recrystallized state were successfully modeled using the Johnson–Mehl–Avrami–Kolmogorov approach.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. M.S. Rashid: Science, 1980, vol. 208, pp. 862-69.10.1126/science.208.4446.862 ↗
2. N.K. Balliger and T. Gladman: Met. Sci., 1981, vol. 15, pp. 95-108.10.1016/0036-9748(81)90144-7 ↗
3. M. Mazinani and W.J. Poole: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 328-39.10.1007/s11661-006-9023-3 ↗
4. G. Avramovic-Cingara, Y. Ososkov, M.K. Jain and D.S. Wilkinson: Mater. Sci. Eng. A, 2009, vol. 516, pp. 7-16.10.1016/j.msea.2009.03.055 ↗
5. G.R. Speich, A. Szirmae and M.J. Richards: Trans. Soc. Min. Eng. AIME, 1969, vol. 245, pp. 1063-74.
6. C.I. Garcia and A.J. Deardo: Metall. Trans. A, 1981, vol. 12A, pp. 521-30.10.1007/BF02648551 ↗
7. G.R. Speich, V.A. Demarest and R.L. Miller: Metall. Trans. A, 1981, vol. 12A, pp. 1419-28.10.1007/BF02643686 ↗
8. X.-L. Cai, A.J. Garratt-Reed and W.S. Owen: Metall. Trans. A, 1985, vol. 16A, pp. 543-57.10.1007/BF02814228 ↗
9. J.J. Yi, I.S. Kim and H.S. Choi: Metall. Trans. A, 1985, vol. 16A, pp. 1237-45.10.1007/BF02670328 ↗
10. V.I. Savran, Y. Van Leeuwen, D.N. Hanlon, C. Kwakernaak, W.G. Sloof and J. Sietsma: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 946-55.10.1007/s11661-007-9128-3 ↗
11. V.I. Savran, S.E. Offerman and J. Sietsma: Metall. Mater. Trans. A, 2010, vol. 41, pp. 583-91.10.1007/s11661-009-0142-5 ↗
12. M. Tokizane, N. Matsumura, K. Tsuzaki, T. Maki and I. Tamura: Metall. Trans. A, 1982, vol. 13A, pp. 1379-88.10.1007/BF02642875 ↗
13. D.Z. Yang, E.L. Brown, D.K. Matlock and G. Krauss: Metall. Trans. A, 1985, vol. 16A, pp. 1385-92.10.1007/BF02658671 ↗
14. J. Huang, W.J. Poole and M. Militzer: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3363-75.10.1007/s11661-004-0173-x ↗
15. V. Andrade-Carozzo and P.J. Jacques: Mater. Sci. Forum, 2007, vol. 539-543, pp. 4649-54.10.4028/www.scientific.net/MSF.539-543.4649 ↗
16. T. Ogawa, N. Maruyama, N. Sugiura and N. Yoshinaga: Isij Int., 2010, vol. 50, pp. 469-75.10.2355/isijinternational.50.469 ↗
17. H. Azizi-Alizamini, M. Militzer and W.J. Poole: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1544-57.10.1007/s11661-010-0551-5 ↗
18. R.R. Mohanty, O.A. Girina and N.M. Fonstein: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3680-90.10.1007/s11661-011-0753-5 ↗
19. W.F. Hosford and R.M. Caddell: Metal Forming: Mechanics and Metallurgy, 3rd ed., Cambridge University Press, New York, NY, 2007, pp. 163–64.10.1017/CBO9780511811111 ↗
20. F. S. Lepera: J. Met., 1980, vol. 32, pp. 38-39.
21. T. Gladman: Mater. Sci. Technol., 1990, vol. 6, pp. 1131-38.10.1179/026708390790190018 ↗
22. G. Krauss: Steels—Processing, Structure and Performance, 3rd ed., ASM International, Materials Park, OH, 2005, p. 299.
23. A. Kolmogorov: Izv. Acad. Sci. USSR, Math. Ser., 1937, vol. 1, pp. 355–59.
24. W.A. Johnson and R.F. Mehl: Trans. Am. Inst. Min., Metall. Pet. Eng., 1939, vol. 135, pp. 416–42.
25. M. Avrami: J. Chem. Phys., 1939, vol. 7, pp. 1103-12.10.1063/1.1750380 ↗
26. J.W. Cahn: Acta Metall., 1956, vol. 4, pp. 572-75.10.1016/0001-6160(56)90158-4 ↗
27. M. Lusk and H.-J. Jou: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 287-91.10.1007/s11661-997-0131-5 ↗
28. P.R. Rios: Acta Mater., 2005, vol. 53, pp. 4893-901.10.1016/j.actamat.2005.07.005 ↗
29. W.C. Leslie, F.J. Plecity and J.T. Michalak: Trans. Metall. Soc. AIME, 1961, vol. 221, pp. 691-700.
30. K. Mukunthan and E.B. Hawbolt: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3410-23.10.1007/BF02595434 ↗
31. M. Oyarzábal, A. Martínez-de-Guerenu, and I. Gutiérrez: Mater. Sci. Eng. A, 2008, vol. 485, pp. 200–09.10.1016/j.msea.2007.07.077 ↗
32. W.D. Callister, Jr., and D.G. Rethwisch: Materials Science and Engineering: an Introduction, 7th ed., Wiley, New York, NY, 2007, p. 341.
33. T. Swarr and G. Krauss: Metall. Trans. A, 1976, vol. 7A, pp. 41-48.10.1007/BF02644037 ↗
34. S. Takaki, S. Iizuka, K. Tomimura, and Y. Tokunaga: Mater. Trans., JIM, 1992, vol. 33, pp. 577–84.10.2320/matertrans1989.33.577 ↗
35. R.N. Caron and G. Krauss: Metall. Trans., 1972, vol. 3A, pp. 2381-89.10.1007/BF02647041 ↗
36. J.W. Cahn: Acta Metall., 1962, vol. 10, pp. 789-98.10.1016/0001-6160(62)90092-5 ↗
37. G.R. Purdy and Y.J.M. Brechet: Acta Metall. Mater., 1995, vol. 43, pp. 3763-74.10.1016/0956-7151(95)90160-4 ↗
38. F. Fazeli and M. Militzer: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1395-1405.10.1007/s11661-005-0232-y ↗
39. E.A. Brandes and G.B. Brook: Smithells Metals Reference Book, 7th ed., Elsevier, Amsterdam, 1998, pp. 13–19.