journal article·2002-01

Intermetallic-reinforced light-metal matrix in-situ composites

R. A. Varin

Publisher page

Abstract

Transition-metal trialuminide intermetallics such as Al3Zr and Al3Ti, having low densities and high elastic moduli, are good candidates for the in-situ reinforcement of light-metal matrices based on Al and Mg alloys. In this work, in-situ composites based on Al and Al-Mg matrices reinforced with an Al3Zr intermetallic were successfully processed by conventional ingot metallurgy. The microstructural studies showed that “needle” or “feathery”-like particles of Al3Zr phase, whose volume fraction increased with increasing concentration of Zr, were formed in the Al matrix in the investigated range of Zr contents from 0.9 to 11.6 at. pct. Properties of Al-Zr alloys were investigated as a function of volume fraction of Al3Zr. It is shown that the density, hardness, and yield strength of the in-situ Al/Al3Zr composites can be quite adequately described by the composite rule-of-mixtures (ROM) behavior. Alloying of a binary Al-2.4 at. pct Zr alloy with Mg up to ∼25 at. pct reduces profoundly its density and, additionally, strengthens the matrix by a Mg solid-solution strengthening mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. B. Maruyama and W.H. Hunt, Jr.: JOM, 1999, vol. 51(11), pp. 59–61.10.1007/s11837-999-0225-1 ↗
2. W.H. Hunt, Jr. and B. Maruyama: JOM, 1999, vol. 51 (11), pp. 62–64.10.1007/s11837-999-0226-0 ↗
3. D.W. Richerson: Modern Ceramic Engineering, Marcel Dekker, Inc., New York, NY, 1992, p. 166.
4. W.C. Harrigan, Jr.: in Metal Matrix Composites: Processing and Interfaces, R.K. Everett and R.J. Arsenault, eds., Academic Press, San Diego, CA, 1991, p. 3.
5. J.L. Cook and W.R. Mohn: Engineered Materials Handbook—Composites, ASM INTERNATIONAL, Metals Park, OH, 1987, pp. 896–902.
6. M.W. Toaz: Engineered Materials Handbook—Composites, ASM INTERNATIONAL, Metals Park, OH, 1987, pp. 903–10.
7. Metal Matrix Composites: Processing and Interfaces, R.K. Everett and R.J. Arsenault, eds., Academic Press, San Diego, CA, 1991.
8. K.K. Chawla: Composite Materials—Science and Engineering, Springer-Verlag, New York, NY, 1998, ch. 6.10.1007/978-1-4757-2966-5 ↗
9. A.E. Carlsson and P.J. Meschter: in Intermetallic Compounds—Principles and Practice, vol. 1, Principles, J.H. Westbrook and R.L. Fleischer, eds., John Wiley & Sons, Chichester, 1995, pp. 55–76.
10. M. Nakamura: in Intermetallic Compounds—Principles and Practice, vol. 1, Principles, pp. 873–93.
11. R.L. Fleischer, R.S. Gilmore, and R.J. Zabala: Acta Metall., 1989, vol. 37, pp. 2801–03.10.1016/0001-6160(89)90314-3 ↗
12. M.S. Zedalis, M.V. Ghate, and M.E. Fine: Scripta Metall., 1985, vol. 19, pp. 647–50.10.1016/0036-9748(85)90354-0 ↗
13. D.J. Skinner and M. Zedalis: Scripta Metall., 1988, vol. 22, pp. 1783–85.10.1016/S0036-9748(88)80284-9 ↗
14. R.L. Fleischer: in Intermetallic Compounds—Principles and Practice, vol. 1, Principles, J.H. Westbrook and R.L. Fleischer, eds., John Wiley & Sons, Chichester, 1995, pp. 237–56.
15. J.H. Xu and A.J. Freeman: J. Mater. Res., 1991, vol. 6, pp. 1188–99.10.1557/JMR.1991.1188 ↗
16. C.L. Fu: J. Mater. Res., 1990, vol. 5, p. 971.10.1557/JMR.1990.0971 ↗
17. N. Dudzinski: J. Inst. Met., 1952–53, vol. 81, pp. 49–55.
18. M. Yamaguchi and H. Inui: in Intermetallic Compounds—Principles and Practice, vol. 2, Practice, J.H. Westbrook and R.L. Fleischer, eds., John Wiley & Sons, Chichester, 1995, pp. 147–73.
19. S.K. Das: in Intermetallic Compounds—Principles and Practice, vol. 2, Practice, pp. 175–98.
20. Y. Fukui, K. Takashima, and C.B. Ponton: J. Mater. Sci., 1994, vol. 29, pp. 2281–88.10.1007/BF00363415 ↗
21. O. Yanagisawa, T. Yano, T. Sagahara, and M. Ohmori: Trans. Jpn. Inst. Met., 1985, 26, pp. 160–66.10.2320/matertrans1960.26.160 ↗
22. N. Dudzinski: J. Inst. Met., 1954–55, vol. 83, pp. 444–48.
23. Yuyong Chen and D.D.L. Chung: J. Mater. Sci., 1995, vol. 30, pp. 4609–16.10.1007/BF01153069 ↗
24. J.A. Hawk, P.K. Mirchandani, R.C. Benn, and H.G.F. Wilsdorf: in Dispersion Strengthened Aluminum Alloys, Y.-W. Kim and W.M. Griffin, eds. TMS, Warrendale, PA, 1988, pp. 551–72.
25. S.H. Wang, P.W. Kao, and C.P. Chang: Scripta Metall. Mater., 1993, vol. 29, pp. 323–28.10.1016/0956-716X(93)90507-O ↗
26. S.H. Wang and P.W. Kao: Acta Mater., 1998, vol. 8, pp. 2675–82.10.1016/S1359-6454(97)00470-9 ↗
27. S.H. Wang, P.W. Kao, and C.P. Chang: Scripta Mater., 1999, vol. 40, pp. 289–95.10.1016/S1359-6462(98)00423-0 ↗
28. J.R. Ryu, K.I. Moon and K.S. Lee: J. Alloys Compounds, 2000, vol. 296, pp. 157–65.10.1016/S0925-8388(99)00518-6 ↗
29. P.A. Earvolino, M.E. Fine, J.R. Weertman, and V.R. Parameswaran: Scripta Metall. Mater., 1992, vol. 26, pp. 945–48.10.1016/0956-716X(92)90687-A ↗
30. Binary Alloy Phase Diagrams, T.B. Massalski, ed., ASM INTERNATIONAL, Materials, Park, OH, 1990, vol. 1.
31. M.A. Meyers and K.K. Chawla: Mechanical Metallurgy—Principles and Applications, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1984, ch. 16.
32. D.R. Askeland: The Science and Engineering of Materials, Chapman & Hall, London, 1996, p. 830.
33. G. Frommeyer: in Physical Metallurgy, Part II, R.W. Cahn and P. Haasen, eds., North-Holland Physics Publ. (Elsevier Science Publ. B.V.), Amsterdam, 1983, pp. 1854–83.
34. V.C. Nardone and K.M. Prewo: Scripta Metall., 1986, vol. 20, pp. 43–48.10.1016/0036-9748(86)90210-3 ↗
35. R.J. Arsenault and S.B. Wu: Scripta Metall., 1988, vol. 22, pp. 767–77.10.1016/S0036-9748(88)80046-2 ↗
36. R.J. Arsenault and X. Zhou: Scripta Metall. Mater., 1993, vol. 28, pp. 875–78.10.1016/0956-716X(93)90369-4 ↗
37. R.J. Arsenault and R.M. Fisher: Scripta Metall., 1983, pp. 17 and 67–71.10.1016/0036-9748(83)90072-8 ↗
38. R.J. Arsenault: Mater. Sci. Eng., 1984, vol. 64, pp. 171–81.10.1016/0025-5416(84)90101-0 ↗
39. Y. Flom and R.J. Arsenault: Mater. Sci. Eng., 1985, vol. 75, pp. 151–67.10.1016/0025-5416(85)90186-7 ↗
40. M. Vogelsang, R.J. Arsenault, and R.M. Fisher: Metall. Trans. A, 1986, vol. 17A, pp. 379–89.10.1007/BF02643944 ↗
41. M. Taya and R.J. Arsenault: Scripta Metall., 1987, vol. 21, pp. 349–54.10.1016/0036-9748(87)90227-4 ↗
42. R.J. Arsenault: in Metal Matrix Composites: Mechanisms and Properties, R.K. Everett and R.J. Arsenault, eds., Academic Press, San Diego, CA, Part I, pp. 79–100.
43. K.S. Kumar: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 87–96.
44. Binary Alloy Phase Diagrams, T.B. Massalski, ed., ASM, Metals Park, OH, 1986, vol. 1, pp. 129–31.
45. T.H. Courtney: Mechanical Behavior of Materials, McGraw-Hill Publ. Co., New York, NY, 1990, p. 181.
46. M.A. Meyers and K.K. Chawla: Mechanical Behavior of Materials, Prentice-Hall, Upper Saddle River, NJ, 1999, p. 469.