journal article·2007-02

Microstructural Changes Due to Friction Stir Processing of Investment-Cast Ti-6Al-4V

A. L. Pilchak, M. C. Juhas, J. C. Williams

Publisher page

Abstract

Friction stir processing (FSP) was used to modify the coarse fully lamellar microstructure on the surface of investment-cast and hot isostatically pressed (HIP) Ti-6Al-4V plate. The α colony and platelet structure in the base material (BM) was refined such that the effective slip length was reduced from the α colony size of the BM, several hundred microns, to that of fine equiaxed primary α grains that are on the order of 1 μm. This change in the microstructure resulting from FSP is expected to increase fatigue crack initiation resistance making it beneficial for titanium components for aerospace applications. The as-cast coarse lamellar microstructure has superior fatigue crack growth resistance compared to other microstructures that can be obtained by thermomechanical processing. Thus, it is likely that an increase in fatigue life is obtainable by FSP. Given the growing interest in friction stir welding (FSW) and FSP of titanium alloys, we believe some consistent microstructural descriptors will help avoid confusion. Accordingly, we propose terminology to standardize the descriptions of the microstructures created during FSP and FSW of titanium alloys. We also describe the microstructure changes that occur in the stir zone (SZ), transition zone (TZ), and heat-affected zone (HAZ) during FSP of Ti-6Al-4V.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: G.B. Patent Application No. 9125978.8, Dec. 1991.
2. Park S.H.C., Sato Y.S., Kokawa H., Okamoto K., Hirano S., Inagaki M. (2005) Sci. Technol. Weld. Joining, 10(5), 550–5610.1179/174329305X46691 ↗
3. L. Christodoulou, W. Palko, and C. Fuller: in Friction Stir Welding and Processing III, K.V. Jata, M.W. Mahoney, R.S. Mishra, and T.J. Lienert, eds., TMS, Warrendale, PA, 2005, pp. 57–66.
4. Oh-ishi K., McNelley T.R. (2005) Metall. Trans. A 36A, 1575–8510.1007/s11661-005-0249-2 ↗
5. Lee W.-B., Lee C.-Y., Chang W.-S., Yeon Y.-M., Jung S.-B. (2005) Mater. Lett. 59, 3315–1810.1016/j.matlet.2005.05.064 ↗
6. Ramirez A.J., Juhas M.C. (2003) THERMEC’2003, Mater. Sci. Forum, 426–432, 2999–300410.4028/www.scientific.net/MSF.426-432.2999 ↗
7. Y. Li, E. Hood, W. Tang, A.P. Reynolds: in Friction Stir Welding and Processing III, K.V. Jata, M.W. Mahoney, R.S. Mishra, and T.J. Lienert, eds., TMS, Warrendale, PA, 2005, pp. 81–89.
8. Reynolds A.P., Hood E., Tang W. (2005) Scripta Mater. 52, 491–9410.1016/j.scriptamat.2004.11.009 ↗
9. Lienert T.J., Stellwag W.L., Grimmett B.B., Warke R.W. (2003) Welding J. 82(1), 1S–9S10.1179/136217103225008847 ↗
10. Mishra R.S., Mahoney M.W., McFadden S.X., Mara N.A., Mukherjee A.K. (2000) Scripta Mater. 42, 163–6810.1016/S1359-6462(99)00329-2 ↗
11. G. Lutjering and J.C. Williams: Titanium, Springer, New York, NY, 2003, vol. 67, pp. 217–18
12. Mishra R.S., Ma Z.Y. (2005) Mater. Sci. Eng. R. 50, 1–7810.1016/j.mser.2005.07.001 ↗
13. R.W. Fonda, J.F. Bingert, and K.J. Colligan: Proc. 5th Int. Symp. on Friction Stir Welding, Metz, France, Sept. 14–16, 2004.
14. Fonda R.W., Bingert J.F. (2004) Metall. Mater. Trans. A 35A, 1487–9910.1007/s11661-004-0257-7 ↗
15. Sutton M.A., Yang B., Reynolds A.P., Taylor R. (2002) Mater. Sci. Eng. A 323, 160–6610.1016/S0921-5093(01)01358-2 ↗
16. T.J. Lienert , K.V. Jata, R. Wheeler, and V. Seetharaman: Proc. Joining of Advanced and Specialty Materials III, ASM INTERNATIONAL, Materials Park, OH, 2001, pp. 160–66.
17. Paton N.E., Backofen W.A. (1970) Metall. Trans. 1, pp. 2839–4810.1007/BF03037822 ↗
18. Williams J.C., Baggerly R.G., Paton N.E. (2002) Metall. Mater. Trans. A 33A, 837–5010.1007/s11661-002-0153-y ↗
19. M.C. Juhas, G.B. Viswanathan, and H.L. Fraser: Proc. Lightweight Alloys for Aerospace Application, K. Jata, E.W. Lee, W. Frazier, and N.J. Kim, eds., TMS, Warrendale, PA, 2001, pp. 209–17.
20. M.C. Juhas, G.B. Viswanathan, and H.L. Fraser: Proc. 2nd Symp. on Friction Stir Welding, Gothenburg, Sweden, June 2000.
21. N. Karogal: Master’s Thesis, The Ohio State University, Columbus, OH, 2002.
22. Peters M., G. Lütjering, Ziegler G. (1983) Z. Metallkd. 74, 274–82
23. Thomas W.M., Threadgill P.L., Nicholas E.D. (1999) Sci. Technol. Weld. Joining 4(6), 365–7210.1179/136217199101538012 ↗
24. Klingensmith S., DuPont J.N., Marder A.R. (2005) Weld. J. 84(5), 77S–85S
25. Sato Y.S., Kokawa H., Enmoto M., Jogan S. (1999) Metall. Trans. A 30(9), 2429–3810.1007/s11661-999-0251-1 ↗
26. K. Oh-ishi, Cuevas A.M., Swisher D.L., McNelley T.R. (2003) THERMEC’2003, Mater. Sci. Forum, vols. 426–432, 2885–9010.4028/www.scientific.net/MSF.426-432.2885 ↗
27. W.J. Arbegast: in Hot Deformation of Aluminum Alloys III, Z. Jin, A. Beaudoin, T.A. Bieler, and B. Radhakrishnan, eds., TMS, Warrendale, PA, 2003, pp. 313–27.
28. Bieler T.R., Semiatin S.L. (2002) Int. J. Plasticity 18, 1165–8910.1016/S0749-6419(01)00057-2 ↗
29. Suri S., G.B Viswanathan, Neeraj T., D.-H. Hou, Mills M.J. (1999) Acta Mater. 47(3), 1019–3410.1016/S1359-6454(98)00364-4 ↗
30. M.J. Mills, D.H., S. Suri, and G.B Viswanathan: Boundaries and Interfaces in Materials, TMS, Warrendale, PA, 1998, p. 295
31. Vilaca P., Quintino L., dos Santos J.F. (2005) J. Mater. Proc. Technol. 169, 452–6510.1016/j.jmatprotec.2004.12.016 ↗
32. Heurtier P., Jones M.J., Desrayaud C., Driver J.H., Montheillet F., Allehaux D. (2006) J. Mater. Processing Technol. 171(3), 348–5710.1016/j.jmatprotec.2005.07.014 ↗
33. J. Sanders, J. Schneider, and A.C. Nunes: MS&T 2005, ASM INTERNATIONAL, Pittsburgh, PA
34. Chauvy C., Barberis P., Montheillet F. (2006) Mater. Sci. Eng. A 431, 59–6710.1016/j.msea.2006.05.031 ↗
35. M. James and M. Mahoney: Proc. 1st Int. Symp. on Friction Stir Welding, Thousand Oaks, CA, June 14–16, 1999.
36. G. Wegmann, J. Albrecht, G. Lutjering, K.D. Folkers, and C. Liesner: Z. Metallkd., 1997, vol. 88(10), pp. 764–73.