journal article·2016-06

Hydrogen Embrittlement Susceptibility of Fe-Mn Binary Alloys with High Mn Content: Effects of Stable and Metastable ε-Martensite, and Mn Concentration

Motomichi Koyama, Shota Okazaki, Takahiro Sawaguchi, Kaneaki Tsuzaki

Publisher page

Abstract

To obtain a basic understanding of hydrogen embrittlement associated with e-martensite, we investigated the tensile behavior of binary Fe-Mn alloys with high Mn content under cathodic hydrogen charging. We used Fe-20Mn, Fe-28Mn, Fe-32Mn, and Fe-40Mn alloys. The correlation between the microstructure and crack morphology was clarified through electron backscatter diffraction measurements and electron channeling contrast imaging. e-martensite in the Fe-20Mn alloy critically deteriorated the resistance to hydrogen embrittlement owing to transformation to α′-martensite. However, when e-martensite is stable, hydrogen embrittlement susceptibility became low, particularly in the Fe-32Mn alloys, even though the formation of e-martensite plates assisted boundary cracking. The Fe-40Mn alloys, in which no martensite forms even after fracture, showed higher hydrogen embrittlement susceptibility compared to the Fe-32Mn alloy. Namely, in Fe-Mn binary alloys, the Mn content has an optimal value for hydrogen embrittlement susceptibility because of the following two reasons: (1) The formation of stable e-martensite seems to have a positive effect in suppressing hydrogen-enhanced localized plasticity, but causes boundary cracking, and (2) an increase in Mn content stabilizes austenite, suppressing martensite-related cracking, but probably decreases the cohesive energy of grain boundaries, causing intergranular cracking. As a consequence, the optimal Mn content was 32 wt pct in the present alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. [1] L. Remy and A. Pineau: Mater. Sci. Eng., 1977, 28, pp. 99-107.10.1016/0025-5416(77)90093-3 ↗
2. [2] B.C. De Cooman, O. Kwon and K.G. Chin: Mater. Sci. Tech-Lond., 2012, 28, pp. 513-27.10.1179/1743284711Y.0000000095 ↗
3. [3] O. Bouaziz, S. Allain, C.P. Scott, P. Cugy and D. Barbier: Curr. Opin. Solid State Mater. Sci., 2011, 15, pp. 141-68.10.1016/j.cossms.2011.04.002 ↗
4. D. Raabe, H. Springer, I. Gutierrez-Urrutia, F. Roters, M. Bausch, J.B. Seol, M. Koyama, P.P. Choi and K. Tsuzaki: JOM, 2014, 66, pp. 1845-56.10.1007/s11837-014-1032-x ↗
5. [5] T. Sawaguchi, P. Sahu, T. Kikuchi, K. Ogawa, S. Kajiwara, A. Kushibe, M. Higashino and T. Ogawa: Scr. Mater., 2006, 54, pp. 1885-90.10.1016/j.scriptamat.2006.02.013 ↗
6. [6] T. Sawaguchi, L.G. Bujoreanu, T. Kikuchi, K. Ogawa, M. Koyama and M. Murakami: Scr. Mater., 2008, 59, pp. 826-29.10.1016/j.scriptamat.2008.06.030 ↗
7. [7] I. Nikulin, T. Sawaguchi and K. Tsuzaki: Mater. Sci. Eng. A, 2013, 587, pp. 192-200.10.1016/j.msea.2013.08.061 ↗
8. [8] T. Sawaguchi, I. Nikulin, K. Ogawa, K. Sekido, S. Takamori, T. Maruyama, Y. Chiba, A. Kushibe, Y. Inoue and K. Tsuzaki: Scr. Mater., 2015, 99, pp. 49-52.10.1016/j.scriptamat.2014.11.024 ↗
9. [9] M. Koyama, T. Sawaguchi and K. Tsuzaki: ISIJ Int., 2012, 52, pp. 161-63.10.2355/isijinternational.52.161 ↗
10. [10] M. Koyama, T. Sawaguchi and K. Tsuzaki: Metall. Mater. Trans. A, 2012, 43, pp. 4063-74.10.1007/s11661-012-1220-7 ↗
11. [11] M. Koyama, T. Sawaguchi, T. Lee, C.S. Lee and K. Tsuzaki: Mater. Sci. Eng. A, 2011, 528, pp. 7310-16.10.1016/j.msea.2011.06.011 ↗
12. [12] M. Koyama, T. Sawaguchi and K. Tsuzaki: Mater. Trans., 2015, 56, pp. 819-25.10.2320/matertrans.M2015042 ↗
13. K. Tsuzaki and M. Koyama: Eur. Congr. Exhib. Adv. Mater. Processes, Warsaw, 2015.
14. [14] L. Zhang, M. Wen, M. Imade, S. Fukuyama and K. Yokogawa: Acta Mater., 2008, 56, pp. 3414-21.10.1016/j.actamat.2008.03.022 ↗
15. [15] D. Eliezer, D.G. Chakrapani, C.J. Altstetter and E.N. Pugh: Metall. Trans. A, 1979, 10, pp. 935-41.10.1007/BF02658313 ↗
16. [16] Y.S. Chun, J.S. Kim, K.-T. Park, Y.-K. Lee and C.S. Lee: Mater. Sci. Eng. A, 2012, 533, pp. 87-95.10.1016/j.msea.2011.11.039 ↗
17. [17] K. Yamada, M. Koyama, T. Kaneko and K. Tsuzaki: Scr. Mater., 2015, 105, pp. 54-57.10.1016/j.scriptamat.2015.05.007 ↗
18. [18] V.N. Shivanyuk, J. Foct and V.G. Gavriljuk: Scr. Mater., 2003, 49, pp. 601-06.10.1016/S1359-6462(03)00338-5 ↗
19. [19] H. Nakatsu and S. Takaki: Nippon Kinzoku Gakkaishi (Japan), 1996, 60, pp. 141-48.
20. [20] S. Takaki, T. Furuya and Y. Tokunaga: ISIJ Int., 1990, 30, pp. 632-38.10.2355/isijinternational.30.632 ↗
21. [21] Y. Tomota, M. Strum and J.W. Morris: Metall. Trans. A, 1986, 17, pp. 537-47.10.1007/BF02643961 ↗
22. [22] X. Zhang, T. Sawaguchi, K. Ogawa, F. Yin and X. Zhao: J. Alloys Compd., 2013, 577, pp. S533-37.10.1016/j.jallcom.2011.12.109 ↗
23. [23] H. Schumann: J. Kristall Technik, 1974, 10, pp. 1141-50.10.1002/crat.19740091009 ↗
24. [24] V. Bliznuk, V. Gavriljuk, B. Shanina, A. Konchits and S. Kolesnik: Acta Mater., 2003, 51, pp. 6095-103.10.1016/S1359-6454(03)00430-0 ↗
25. [25] V. Gavriljuk, V. Bliznuk, B. Shanina and S. Kolesnik: Mater. Sci. Eng. A, 2005, 406, pp. 1-10.10.1016/j.msea.2005.05.043 ↗
26. [26] S.-J. Lee, J. Kim, S.N. Kane and B.C.D. Cooman: Acta Mater., 2011, 59, pp. 6809-19.10.1016/j.actamat.2011.07.040 ↗
27. [27] M. Koyama, T. Sawaguchi and K. Tsuzaki: Philos. Mag., 2012, 92, pp. 3051-63.10.1080/14786435.2012.685769 ↗
28. K. Chan, L. Chen, T. Lui: Mater. Trans. JIM, 1997, 38, pp. 420-26.10.2320/matertrans1989.38.420 ↗
29. [29] J.-B. Seol, J. Jung, Y. Jang and C. Park: Acta Mater., 2013, 61, pp. 558-78.10.1016/j.actamat.2012.09.078 ↗
30. [30] P. Adler, G. Olson and W. Owen: Metall. Mater. Trans. A, 1986, 17, pp. 1725-37.10.1007/BF02817271 ↗
31. [31] Y.N. Dastur and W.C. Leslie: Metall. Trans. A, 1981, 12, pp. 749-59.10.1007/BF02648339 ↗
32. [32] L. Chen, H.-S. Kim, S.-K. Kim and B. De Cooman: ISIJ Int., 2007, 47, pp. 1804-12.10.2355/isijinternational.47.1804 ↗
33. [33] G.B. Olson and M. Cohen: Metall. Trans. A, 1975, 6, pp. 791-95.10.1007/BF02672301 ↗
34. [34] T. Inamura, K. Takashima and Y. Higo: Philos. Mag., 2003, 83, pp. 935-54.10.1080/0141861031000065338 ↗
35. [35] J.H. Ryu, S.K. Kim, C.S. Lee, D.-W. Suh and H.K.D.H. Bhadeshia: Proc. R. Soc. A, 2013, 469, 20120458.10.1098/rspa.2012.0458 ↗
36. [36] M. Koyama, E. Akiyama, K. Tsuzaki and D. Raabe: Acta Mater., 2013, 61, pp. 4607-18.10.1016/j.actamat.2013.04.030 ↗
37. [37] M. Koyama, E. Akiyama, T. Sawaguchi, K. Ogawa, I.V. Kireeva, Y.I. Chumlyakov and K. Tsuzaki: Corros. Sci., 2013, 75, pp. 345-53.10.1016/j.corsci.2013.06.018 ↗
38. [38] M. Koyama, H. Springer, S.V. Merzlikin, K. Tsuzaki, E. Akiyama and D. Raabe: Int. J. Hydrogen Energy, 2014, 39, pp. 4634-46.10.1016/j.ijhydene.2013.12.171 ↗
39. [39] M. Koyama, E. Akiyama and K. Tsuzaki: Corros. Sci., 2012, 59, pp. 277-81.10.1016/j.corsci.2012.03.009 ↗
40. [40] K. Takai and R. Watanuki: ISIJ Int., 2003, 43, pp. 520-26.10.2355/isijinternational.43.520 ↗
41. [41] M. Koyama and K. Tsuzaki: ISIJ Int., 2015, 55, pp. 2269-71.10.2355/isijinternational.ISIJINT-2015-215 ↗
42. [42] K. Tsuzaki, K. Fukuda, M. Koyama and H. Matsunaga: Scripta Mater., 2016, 113, pp. 6-9.10.1016/j.scriptamat.2015.10.016 ↗
43. [43] G.B. Olson and M. Cohen: J. Less-Common Met., 1972, 28, pp. 107-18.10.1016/0022-5088(72)90173-7 ↗
44. [44] L. Zhang, B. An, S. Fukuyama, T. Iijima and K. Yokogawa: J. Appl. Phys., 2010, 108, pp. 063526.10.1063/1.3477321 ↗
45. [45] P.J. Ferreira, I.M. Robertson and H.K. Birnbaum: Acta Mater., 1998, 46, pp. 1749-57.10.1016/S1359-6454(97)00349-2 ↗
46. [46] T. Tabata and H.K. Birnbaum: Scripta Metall. Mater., 1983, 17, pp. 947-50.10.1016/0036-9748(83)90268-5 ↗
47. [47] Y.-B. Wang, W.-Y. Chu and C.-M. Hsiao: Scripta Metall. Mater., 1985, 19, pp. 1161-64.10.1016/0036-9748(85)90228-5 ↗
48. [48] P. Sofronis, Y. Liang and N. Aravas: European Journal of Mechanics - A/Solids, 2001, 20, pp. 857-72.10.1016/S0997-7538(01)01179-2 ↗
49. [49] S. Teus, V. Shyvanyuk and V. Gavriljuk: Mater. Sci. Eng. A, 2008, 497, pp. 290-94.10.1016/j.msea.2008.07.003 ↗
50. [50] R. Yang, D.L. Zhao, Y.M. Wang, S.Q. Wang, H.Q. Ye and C.Y. Wang: Acta Mater., 2001, 49, pp. 1079-85.10.1016/S1359-6454(00)00382-7 ↗
51. [51] Y. Tomota: Tetsu to Hagané, 1991, 77, pp. 11.10.2355/tetsutohagane1955.77.3_315 ↗
52. [52] J.A. Venables: Philos. Mag., 1962, 7, pp. 35-44.10.1080/14786436208201856 ↗
53. [53] Y. Tomota and S. Shibuki: ISIJ Int., 1990, 30, pp. 663-65.10.2355/isijinternational.30.663 ↗
54. [54] M. Blicharski and S. Gorczyca: Met. Sci., 1978, 12, pp. 303-12.10.1179/msc.1978.12.7.303 ↗
55. [55] M. Koyama, E. Akiyama, T. Sawaguchi, D. Raabe and K. Tsuzaki: Scr. Mater., 2012, 66, pp. 459-62.10.1016/j.scriptamat.2011.12.015 ↗