A Study on Laser Beam Welding (LBW) Technique: Effect of Heat Input on the Microstructural Evolution of Superalloy Inconel 718
Source abstract
Abstract
The effect of heat input from laser beam welding (LBW) on the microstructural evolution of superalloy Inconel 718 was investigated. LBW was carried out on 1.6-mm-thick sheets with an average grain size of 13 μm (ASTM # 9.5), and four different heat inputs in the range of 74.5 mm−1 to 126.6 J mm−1 were used. Full penetration was achieved in all weld experiments. Microstructures of the welds were evaluated using an optical microscope and a field emission scanning electron microscope. Increasing the heat input changed the resulting weld shape from a wine glass shape to a stemless glass shape with wider surface bead widths, and the measured average dendrite arm spacing was increased from 1.06 μm to 2.30 μm, indicating the corresponding solidification rate in the range of 1.75 × 105 K s−1 (°C s−1) to 3.5 × 106 K s−1 (°C s−1). The welds also were free from microfissuring even at the lowest heat input trials. The Nb concentration of Laves phase for the current LBW samples was ≈20.0 wt pct. The coefficients of partition and distribution for Nb were determined to be approximately 3.40 and 0.50, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. G. Çam and M. Koçak: Int. Mater. Rev., 1998, vol. 43, no. 1, pp. 1–44.10.1179/imr.1998.43.1.1 ↗
2. G.D.J. Ram, A.V. Reddy, K.P. Rao, G.M. Reddy, and J.K.S. Sundar: J. Mater. Process. Technol., 2005, vol. 167, no. 1, pp. 73–82.10.1016/j.jmatprotec.2004.09.081 ↗
3. N.L. Richards and M.C. Chaturvedi: Int. Mater. Rev., 2000, vol. 45, no. 3, pp. 109–29.10.1179/095066000101528331 ↗
4. A.K.A. Jawwad, M. Strangwood, and C.L. Davis: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1237–47.10.1007/s11661-005-0216-y ↗
5. J.K. Hong, J.H. Park, N.K. Park, I.S. Eom, M.B. Kim, and C.Y. Kang: J. Mater. Process. Technol., 2008, vol. 201, no. 1–3, pp. 515–20.10.1016/j.jmatprotec.2007.11.224 ↗
6. W. Chen, M.C. Chaturvedi, and N.L. Richards: Metall. Mater. Trans. A., 2001, vol. 32A, pp. 931–39.10.1007/s11661-001-0350-0 ↗
7. G.D.J. Ram, A.V. Reddy, K.P. Rao, and G.M. Reddy: Mater. Sci. Technol., 2005, vol. 21, no. 10, pp. 1132–38.10.1179/174328405X62260 ↗
8. G.D.J. Ram, A.V. Reddy, K.P. Rao, and G.M. Reddy: Sci. Technol. Weld. Join., 2004, vol. 9, no. 5, pp. 390–98.10.1179/136217104225021788 ↗
9. C.V.S. Murthy: Masters Thesis, Indian Institute of Technology, Madras, Chennai, India, 2004.
10. L.A. Weeter, C.E. Albright, and W.H. Jones: Weld. J., 1986, vol. 65, no. 3, pp. S51–62.
11. S. Gobbi, L. Zhang, J. Norris, K.H. Richter, and J.H. Loreau: J. Mater. Process. Technol., 1996, vol. 56, nos. 1–4, pp. 333–45.10.1016/0924-0136(95)01847-6 ↗
12. H. Stamm: http://www.bandelin.com/datenblaetter/R33_8338e-2_STAMM.pdf, 2009.
13. T.Y. Kuo: Sci. Technol. Weld. Join., 2005, vol. 10, no. 5, pp. 557–65.10.1179/174329305X46709 ↗
14. SAE AMS 5596J, “Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil and Plate, 52.5Ni-19Cr-3.0Mo-5.1Cb (Nb)-0.90Ti-0.50Al-18Fe, Consumable Electrode Remelted or Vacuum Induction Melted, 1775 °F (968 °C) Solution Heat Treated,” 1999.
15. K.Y. Benyounis, A.G. Olabi, and M.S.J. Hashmi: J. Mater. Process. Technol., 2005, vol. 164, pp. 978–85.10.1016/j.jmatprotec.2005.02.060 ↗
16. E.M. Anawa and A.G. Olabi: Optics Laser Technol., 2008, vol. 40, no. 2, pp. 379–88.10.1016/j.optlastec.2007.07.001 ↗
17. H.M. Wang, J.H. Zhang, Y.J. Tang, and Z.Q. Hu: Mater. Sci. Eng. A, 1992, vol. 156, no. 1, pp. 109–16.10.1016/0921-5093(92)90421-V ↗
18. G.K. Bouse and J.R. Mihalisin: Superalloys, Supercomposites and Superceramics, Eds. J.K. Tien and T. Caulfield, Academic Press, Burlington, MA, 1989, pp. 99–148.10.1016/B978-0-12-690845-9.50010-5 ↗
19. Y.M. Won, K. Kim, T. Yeo, and K.H. Oh: ISIJ Int., 1998, vol. 38, no. 10, pp. 1093–99.10.2355/isijinternational.38.1093 ↗
20. S.A. David and J.M. Vitek: Conf. Proc. Trends in Welding Research, S.A. David and J.M. Vitek, eds., Gatlinburg, TN, 1992, p. 147.
21. P.S. Mohanty and J. Mazumder: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 1269–79.10.1007/s11663-998-0050-x ↗
22. O.A. Idowu, O.A. Ojo, and M.C. Chaturvedi: Mater. Sci. Eng. A, 2007, vol. 454, pp. 389–97.10.1016/j.msea.2006.11.054 ↗
23. N.L. Richards, R. Nakkalil, and M.C. Chaturvedi: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1733–45.10.1007/BF02668538 ↗
24. T.J. Kelly: Weld. J., 1989, vol. 68, no. 2, pp. S44–51.
25. H. Guo, M.C. Chaturvedi, N.L. Richards, and G.S. McMahon: Scripta Mater., 1999, vol. 40, no. 3, pp. 383–88.10.1016/S1359-6462(98)00427-8 ↗
26. X. Huang, M.C. Chaturvedi, and N.L. Richards: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 785–90.10.1007/BF02648966 ↗
27. W.F. Savage, E.F. Nippes, and G.M. Goodwin: Weld. J., 1977, vol. 56, no. 8, pp. S245–53.
28. R.G. Thompson, J.R. Dobbs, and D.E. Mayo: Weld. J., 1986, vol. 65, no. 11, pp. S299–304.
29. G.A. Knorovsky, M.J. Cieslak, T.J. Headley, A.D. Roming, and W.F. Hammetter: Metall. Trans. A, 1989, vol. 20A, pp. 2149–58.10.1007/BF02650300 ↗
30. M.J. Cieslak, T.J. Headley, G.A. Knorovsky, A.D. Roming, and T. Kollie: Metall. Trans. A, 1990, vol. 21A, pp. 479–88.10.1007/BF02782428 ↗
31. C. Radhakrishna, K.P. Rao, and S. Srinivas: J. Mater. Sci. Lett., 1995, vol. 14, no. 24, pp. 1810–12.10.1007/BF00271015 ↗
32. R. Vincent: Acta. Metall., 1985, vol. 33, no. 7, pp. 1205–16.10.1016/0001-6160(85)90231-7 ↗
33. W.-D. Cao: Proc. Conf. Superalloys 718, 625, 706 and Derivates 2005, E.A. Loria, ed., TMS, Warrendale, PA, 2005, pp. 165–77.10.7449/2005/Superalloys_2005_165_177 ↗
34. C. Radhakrishna and K.P. Rao: J. Mater. Sci., 1997, vol. 32, no. 8, pp. 1977–84.10.1023/A:1018541915113 ↗
35. J.J. Schirra, R.H. Caless, and R.W. Hatala: Proc. Conf. Superalloy 718, 625 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1991, pp. 375–88.10.7449/1991/Superalloys_1991_375_388 ↗
36. T. Antonsson and H. Fredriksson: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 85–96.10.1007/s11663-005-0009-0 ↗
37. M.J. Cieslak, T.J. Headley, and A.D. Roming: Metall. Trans. A, 1986, vol. 17A, pp. 2035–47.10.1007/BF02645001 ↗
38. D.L. Olson: Weld. J., 1985, vol. 64, no. 14, pp. S281–95.
39. J.H. Wernick: Intermetallic Compounds, Ed. J.H. Westbrook, Wiley, New York, NY, 1967, pp. 197–216.
40. S.T. Wlodek: Trans. Am. Soc. Met., 1963, vol. 56, pp. 287–303.
41. R.F. Decker: Symp. Steel-Strengthening Mechanisms, Climax Molybdenum Company, Zurich, Switzerland, 1969, p. 147.
42. J.N. DuPont: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3612–20.10.1007/BF02595452 ↗
43. M.J. Cieslak, T.J. Headley, T. Kollie, and A.D. Roming: Metall. Trans. A, 1988, vol. 19A, pp. 2319–31.10.1007/BF02645056 ↗
44. C.V. Robino, J.R. Michael, and M.J. Cieslak: Sci. Technol. Weld. Join., 1997, vol. 2, pp. 220–30.10.1179/stw.1997.2.5.220 ↗