journal article·2011-03Open access

Microstructure and Texture Evolution during Friction Stir Processing of Fully Lamellar Ti-6Al-4V

A. L. Pilchak, J. C. Williams

Abstract

Friction stir processing (FSP) was used to locally refine a thin surface layer of the coarse, fully lamellar microstructure of investment-cast Ti-6Al-4V. Depending on the peak temperature reached in the stir zone during processing relative to the β transus, three distinct classes of microstructures were observed. Using accepted wrought product terminology, they are equiaxed, bimodal, and lamellar, except for the case of FSP, the length scale of each was smaller by at least an order of magnitude compared to typical wrought material. The evolution of an initially strain-free fully lamellar microstructure to each of these three refined conditions was characterized with scanning electron microscopy, transmission electron microscopy and electron backscatter diffraction. The fundamental mechanisms underlying grain refinement during FSP, including both the morphological changes and the formation of high-angle grain boundaries, were discussed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Z.Y. Ma, A.L. Pilchak, M.C. Juhas, and J.C. Williams: Scripta Mater., 2008, vol. 58, pp. 361–66.10.1016/j.scriptamat.2007.09.062 ↗
2. J.E. Spowart, Z.Y. Ma, and R.S. Mishra: in Friction Stir Welding and Processing II, K.V. Jata, M.W. Mahoney, R.S. Mishra, S.L. Semiatin, and T.J. Lienert, eds., TMS, Warrendale, PA, 2003, pp. 243–52.
3. Z.Y. Ma, S.R. Sharma, R.S. Mishra, and M.W. Mahoney: Mater. Sci. Forum, 2003, vols. 426–432, pp. 2891–96.10.4028/www.scientific.net/MSF.426-432.2891 ↗
4. M.W. Mahoney, W.H. Bingel, and R.S. Mishra: Mater. Sci. Forum, 2002, vols. 426–432, pp. 2843–48.
5. K. Oh-Ishi and T.R. McNelley: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2951–61.10.1007/s11661-004-0242-1 ↗
6. K. Oh-Ishi and T.R. McNelley: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1575–85.10.1007/s11661-005-0249-2 ↗
7. A.L. Pilchak, M.C. Juhas, and J.C. Williams: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 401–08.10.1007/s11661-006-9061-x ↗
8. A.L. Pilchak, Z.T. Li, J.J. Fisher, A.P. Reynolds, M.C. Juhas, and J.C. Williams: in Friction Stir Welding and Processing IV, R.S. Mishra, M.W. Mahoney, T.J. Lienert, and K.V. Jata, eds., TMS, Warrendale, PA, 2007, pp. 419–27.
9. A.L. Pilchak, M.C. Juhas, and J.C. Williams: Proc. 11th World Ti 2007 Conf., M. Ninomi, S. Akiyama, M. Ikeda, M. Hagiwara, and K. Maruyama, eds., Kyoto, Japan, 2007, pp. 1723–26.
10. A.L. Pilchak, M.C. Juhas, and J.C. Williams: Weld. World, Res. Suppl., 2008, vol. 52 (9–10), pp. 60–68.10.1007/BF03266670 ↗
11. A.J. Ramirez and M.C. Juhas: THERMEC’2003, Materials Science Forum, 2003, vols. 426–432, pp. 2999–3004.10.4028/www.scientific.net/MSF.426-432.2999 ↗
12. A.L. Pilchak: Ph.D. Dissertation, The Ohio State University, Columbus, OH, 2009.
13. Y. Zhang, Y.S. Sato, H. Kokawa, S.H.C. Park, and S. Hirano: Mater. Sci. Eng. A, 2008, vol. 485, pp. 448–55.10.1016/j.msea.2007.08.051 ↗
14. S. Mironov, Y. Zhang, Y.S. Sato, and H. Kokawa: Scripta Mater., 2008, vol. 59, pp. 27–30.10.1016/j.scriptamat.2008.02.014 ↗
15. T.R. McNelley: Naval Postgraduate School, Monterey, CA, private communication, 2009.
16. G. Lütjering and J.C. Williams: Titanium, Springer-Verlag, New York, NY, 2003.10.1007/978-3-540-71398-2 ↗
17. L. Zhou, H.J. Liu, P. Liu, and Q.W. Liu: Scripta Mater., 2009, vol. 61 (6), pp. 596–99.10.1016/j.scriptamat.2009.05.029 ↗
18. N. Stefansson, S.L. Semiatin, and D. Eylon: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3527–34.10.1007/s11661-002-0340-x ↗
19. M. Rubal: Master’s Thesis, The Ohio State University, Columbus, OH, 2009.
20. M.C. Juhas, G.B. Viswanathan, and H.L. Fraser: Proc. 2nd Symp. on Friction Stir Welding, Gothenburg, Sweden, June 2000.
21. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
22. F.J. Humphreys: Acta Mater., 1997, vol. 45 (10), pp. 4231–40.10.1016/S1359-6454(97)00070-0 ↗
23. M. Peters, G. Lütjering, and G. Ziegler: Z. Metallkd., 1983, vol. 74, pp. 274–82.
24. T.R. Bieler and S.L. Semiatin: Int. J. Plast., 2002, vol. 18, pp. 1165–89.10.1016/S0749-6419(01)00057-2 ↗
25. S.L. Semiatin, V. Seetharaman, and I. Weiss: Mater. Sci. Eng. A, 1999, vol. 263, pp. 257–71.10.1016/S0921-5093(98)01156-3 ↗
26. N. Stefansson and S.L. Semiatin: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 691–98.10.1007/s11661-003-0103-3 ↗
27. R.M. Poths, G. Angella, B.P. Wynne, W.M. Rainforth, S.L. Semiatin, and J.H. Beynon: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2993–3001.10.1007/s11661-004-0246-x ↗
28. S.L. Semiatin, N. Stefansson, and R.D. Doherty: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1372–76.10.1007/s11661-005-0229-6 ↗
29. R.W. Cahn: J. Inst. Met., 1949, vol. 76, p. 121.
30. J.C. Williams, R.G. Baggerly, and N.E. Paton: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 837-50.10.1007/s11661-002-0153-y ↗
31. J.C. Williams, A.W. Sommer, and P.P. Tung: Metall. Trans., 1972, vol. 3, pp. 2979–84.10.1007/BF02652870 ↗
32. L. Germain, N. Gey, M. Humbert, P. Bocher, and M. Jahazi: Acta Mater., 2005, vol. 53, pp. 3535–43.10.1016/j.actamat.2005.03.043 ↗
33. L. Germain, N. Gey, M. Humbert, P. Vo, M. Jahazi, and P. Bocher: Acta Mater., 2008, vol. 56, pp. 4298–4308.10.1016/j.actamat.2008.04.065 ↗
34. I. Weiss, F.H. Froes, D. Eylon, and G.E. Welsch: Metall. Mater. Trans. A, 1986, vol. 17A, pp. 1935–47.10.1007/BF02644991 ↗
35. J.C. Chesnutt, C.G. Rhodes, and J.C. Williams: Fractography-Microscopic Cracking Processes, ASTM STP 600, ASTM, Philadelphia, PA, 1976, pp. 99–138.10.1520/STP29194S ↗
36. W.G. Burgers: Physica, 1934, vol. 1, pp. 561–86.10.1016/S0031-8914(34)80244-3 ↗
37. M.G. Glavicic, P.A. Kobryn, T.R. Bieler, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. 346, pp. 50–59.10.1016/S0921-5093(02)00535-X ↗
38. M.G. Glavicic, P.A. Kobryn, T.R. Bieler, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. 351, pp. 258–64.10.1016/S0921-5093(02)00844-4 ↗
39. C. Cayron: Acta Cryst. Sect. A Foundations Crystallogr., 2006, vol. A62, pp. 21–40.10.1107/S010876730503686X ↗
40. U.F. Kocks, C.N. Tomé, and H.-R. Wenk: Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties, Cambridge University Press, New York, NY, 1998.
41. N.E. Paton, J.C. Williams, and G.P. Rauscher: Titanium: Science and Technology, Proc. 2nd Int. Conf. on Titanium, R.I. Jaffee and H.M. Burte, eds. Plenum Press, New York, NY, 1973, vol. 2, pp. 1049–69.
42. T.J. Lienert, K.V. Jata, R. Wheeler, and V. Seetharaman: Proc. Joining of Advanced and Specialty Materials III, ASM INTERNATIONAL, Materials Park, OH, 2001, pp. 160–66.
43. N. Gey and M. Humbert: Acta Mater., 2002, vol. 50, pp. 277–87.10.1016/S1359-6454(01)00351-2 ↗
44. N. Karogal: Master’s Thesis, The Ohio State University, Columbus, OH, 2002.
45. M.M.Z. Ahmed, B.P. Wynne, W.M. Rainforth, and P.L. Threadgill: Scripta Mater., 2008, vol. 59, pp. 507–10.10.1016/j.scriptamat.2008.04.047 ↗
46. B. Beausir, L.S. Tóth, and K.W. Neale: Acta Mater., 2007, vol. 55, pp. 2695–2705.10.1016/j.actamat.2006.12.021 ↗
47. R.W. Fonda, J.A. Wert, A.P. Reynolds, and W. Tang: Sci. Technol. Weld. Join., 2007, vol. 12 (4), pp. 304–10.10.1179/174329307X197557 ↗
48. W. Cai, J. Mabon, and P. Bellon: Wear, 2009, vol. 267 (1–4), pp. 485–94.10.1016/j.wear.2008.11.016 ↗
49. J.-H. Cho and P.R. Dawson: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1147–64.10.1007/s11661-006-1093-8 ↗
50. K.E. Knipling and R.W. Fonda: Scripta Mater., 2009, vol. 60, pp. 1097–1100.10.1016/j.scriptamat.2009.02.050 ↗
51. D.P. Field, T.W. Nelson, Y. Hovanski, and K.V. Jata: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2869–77.10.1007/s11661-001-1037-2 ↗
52. A.P. Reynolds, E. Hood, and W. Tang: Scripta Mater., 2005, vol. 52, pp. 491–94.10.1016/j.scriptamat.2004.11.009 ↗
53. J.-H. Cho, D.E. Boyce, and P.R. Dawson: Mater. Sci. Eng. A, 2005, vol. 398, pp. 146–63.10.1016/j.msea.2005.03.002 ↗
54. A.A. Salem and S.L. Semiatin: Mater. Sci. Eng. A, 2009, vol. 508, pp. 114–20.10.1016/j.msea.2008.12.035 ↗
55. D. Bhattacharyya, G.B. Viswanathan, R. Denkenberger, D. Furrer, and H.L. Fraser: Acta Mater., 2003, vol. 51, pp. 4679–91.10.1016/S1359-6454(03)00179-4 ↗
56. R.W. Fonda, J.F. Bingert, and K.J. Colligan: Proc. 5th Int. Symp. on Friction Stir Welding, Metz, France, Sept. 14–16, 2004.
57. J. Baczynski and J.J. Jonas: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 447–62.10.1007/s11661-998-0125-y ↗
58. J. Schneider, R. Beshears, and A.C. Nunes Jr.: Mater. Sci. Eng. A, 2006, vols. 435–436, pp. 294–304.10.1016/j.msea.2006.07.082 ↗
59. H.-J. Bunge: Texture Analysis in Materials Science: Mathematical Methods, Butterworth & Co., Berlin, 1982, pp. 55–118.
60. J. Baczynski and J.J. Jonas: Acta Mater., 1996, vol. 44 (11), pp. 4273–88.10.1016/1359-6454(96)00114-0 ↗
61. R.J. Twiss and E.M. Moores: Structural Geology, W.H. Freeman & Co., New York, NY, 1992.
62. A.L. Pilchak, W. Tang, H. Sahiner, A.P. Reynolds, and J.C. Williams: Metall. Mater. Trans. A. DOI:10.1007/s11661-010-0439-4.10.1007/s11661-010-0439-4 ↗
63. H.P. Lee, C. Esling, and H.-J. Bunge: Text. Microstr., 1988, vol. 7, pp. 317–37.10.1155/TSM.7.317 ↗