journal article·2001-03

An evaluation of the flow behavior during high strain rate superplasticity in an Al−Mg−Sc alloy

Shogo Komura, Zenji Horita, Minoru Furukawa, Minoru Nemoto, Terence G. Langdon

Publisher page

Abstract

An Al-3 pct Mg-0.2 pct Sc alloy was fabricated by casting and subjected to equal-channel angular pressing to reduce the grain size to ∼0.2 μm. Very high tensile elongations were achieved in this alloy at temperatures over the range from 573 to 723 K, with elongations up to >2000 pct at temperatures of 673 and 723 K and strain rates at and above 10−2 s−1. By contrast, samples of the same alloy subjected to cold rolling (CR) yielded elongations to failure of <400 pct at 673 K. An analysis of the experimental data for the equal-channel angular (ECA)—pressed samples shows consistency with conventional superplasticity including an activation energy for superplastic flow which is within the range anticipated for grain boundary diffusion in pure Al and interdiffusion in Al−Mg solid solution alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. V.M. Segal:Mater. Sci. Eng., 1995, vol. A197, pp. 157–64.10.1016/0921-5093(95)09705-8 ↗
2. V.M. Segal:Mater. Sci. Eng., 1999, vol. A271, pp. 322–33.10.1016/S0921-5093(99)00248-8 ↗
3. V.V. Stolyarov, Y.T. Zhu, T.C. Lowe, R.K. Islamgaliev, and R.Z. Valiev:Nanostr: Mater:, 1999, vol. 11, pp. 947–54.10.1016/S0965-9773(99)00384-0 ↗
4. T.C. Lowe and R.Z. Valiev:JOM, 2000, vol. 52 (4), pp. 27–28.10.1007/s11837-000-0127-8 ↗
5. R.Z. Valiev, D.A. Salimonenko, N.K. Tsenev, P.B. Berbon, and T.G. Langdon:Scripta Mater., 1997, vol. 37, pp. 1945–50.10.1016/S1359-6462(97)00387-4 ↗
6. S. Komura, P.B. Berbon, M. Furukawa, Z. Horita, M. Nemoto, and T.G. Langdon:Scripta Mater., 1998, vol. 38, pp. 1851–56.10.1016/S1359-6462(98)00099-2 ↗
7. P.B. Berbon, M. Furukawa, Z. Horita, M. Nemoto, N.K. Tsenev, R.Z. Valiev, and T.G. Langdon:Phil. Mag. Lett., 1998, vol. 78, pp. 313–18.10.1080/095008398177896 ↗
8. P.B. Berbon, N.K. Tsenev, R.Z. Valiev, M. Furukawa, Z. Horita, M. Nemoto, and T.G. Langdon:Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2237–43.10.1007/s11661-998-0101-6 ↗
9. T.G. Langdon, M. Furukawa, Z. Horita, and M. Nemoto:JOM, 1998, vol. 50 (6), pp. 41–45.10.1007/s11837-998-0126-8 ↗
10. S. Lee, P.B. Berbon, M. Furukawa, Z. Horita, M. Nemoto, N.K. Tsenev, R.Z. Valiev, and T.G. Langdon:Mater. Sci. Eng., 1999, vol. A272, pp. 63–72.10.1016/S0921-5093(99)00470-0 ↗
11. P.B. Berbon, S. Komura, A. Utsunomiya, Z. Horita, M. Furukawa, M. Nemoto, and T.G. Langdon:Mater. Trans. JIM, 1999, vol. 40, pp. 772–78.10.2320/matertrans1989.40.772 ↗
12. Z. Horita, M. Furukawa, M. Nemoto, A.J. Barnes, and T.G. Langdon:Acta Mater., 2000, vol. 48, pp. 3633–40.10.1016/S1359-6454(00)00182-8 ↗
13. K. Higashi, M. Mabuchi, and T.G. Langdon:Iron Steel Inst. Jpn. Int., 1996, vol. 36, pp. 1423–38.10.2355/isijinternational.36.1423 ↗
14. M.E. Drits, S.G. Pavlenko, L.S. Toropova, Yu.G. Bykov, and L.B. Ber:Sov. Phys. Dokl., 1981, vol. 26, pp. 344–46.
15. L.S. Kramer, W.T. Tack, and M.T. Fernandes:Adv. Mater. Proc., 1997, vol. 152 (10), pp. 23–24.
16. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon:Acta Mater., 1997, vol. 45, pp. 4733–41.10.1016/S1359-6454(97)00100-6 ↗
17. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon:Acta Mater., 1998, vol. 46, pp. 3317–31.10.1016/S1359-6454(97)00494-1 ↗
18. Y. Iwahashi, M. Furukawa, Z. Horita, M. Nemoto, and T.G. Langdon:Metall. Mater: Trans. A, 1998, vol. 29A, pp. 2245–52.10.1007/s11661-998-0102-5 ↗
19. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto, and T.G. Langdon:Scripta Mater., 1996, vol. 35, pp. 143–46.10.1016/1359-6462(96)00107-8 ↗
20. P.B. Berbon, M. Furukawa, Z. Horita, M. Nemoto, and T.G. Langdon:Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1989–97.10.1007/s11661-999-0009-9 ↗
21. M. Furukawa, Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon:Mater. Sci. Eng., 1998, vol. A257, pp. 328–32.10.1016/S0921-5093(98)00750-3 ↗
22. K. Oh-ishi, Z. Horita, M. Furukawa, M. Nemoto, and T.G. Langdon:Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2011–13.10.1007/s11661-998-0027-z ↗
23. R. Hill:The Mathematical Theory of Plasticity, The Clarendon Press, Oxford, England, 1950, ch. 2.
24. J. Wang, Y. Iwahashi, Z. Horita, M. Furukawa, M. Nemoto, R.Z. Valiev, and T.G. Langdon:Acta Mater., 1996, vol. 44, pp. 2973–82.10.1016/1359-6454(95)00395-9 ↗
25. E.M. Taleff, G.A. Henshall, T.G. Nieh, D.R. Lesuer, and J. Wadsworth:Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1081–91.
26. F.A. Mohamed and T.G. Langdon:Acta Metall., 1981, vol. 29, pp. 911–20.10.1016/0001-6160(81)90133-4 ↗
27. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon:Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2503–10.10.1007/s11661-998-0222-y ↗
28. F.A. Mohamed, M.M.I. Ahmed, and T.G. Langdon:Metall. Trans. A, 1977, vol. 8A, pp. 933–8.10.1007/BF02661575 ↗
29. M.M.I. Ahmed, F.A. Mohamed, and T.G. Langdon:J. Mater. Sci., 1979, vol. 14, pp. 2913–18.10.1007/BF00611474 ↗
30. R.R. Sawtell and C.L. Jensen:Metall. Trans. A 1990, vol. 21A, pp. 421–30.10.1007/BF02782422 ↗
31. T.G. Nieh, L.M. Hsiung, J. Wadsworth, and R. Kaibyshev:Acta Mater., 1998, vol. 46, pp. 2789–2800.10.1016/S1359-6454(97)00452-7 ↗
32. S.D. Terhune, Z. Horita, M. Nemoto, Y. Li, T.G. Langdon, and T.R. McNelley:Proc. Int. Conf. on Recrystallization and Related Phenomena, T. Sakai and H.G. Suzuki, eds., Japan Institute of Metals, Sendai, 1999, pp. 515–22.
33. P. Yavari, F.A. Mohamed, and T.G. Langdon:Acta Metall., 1981, vol. 29, pp. 1495–1507.10.1016/0001-6160(81)90184-X ↗
34. P. Yavari and T.G. Langdon:Acta Metall., 1982, vol. 30, pp. 2181–96.10.1016/0001-6160(82)90139-0 ↗
35. J. Friedel:Dislocations, Pergamon Press, Oxford, United Kingdom, 1964.
36. W. Köster and W. Rauscher:Z. Metallkd., 1948, vol. 39, pp. 111–20.
37. F.A. Mohamed and T.G. Langdon:Metall. Trans., 1974, vol. 5, pp. 2339–45.10.1007/BF02644014 ↗
38. T.G. Langdon:Metall. Trans. A, 1982, vol. 13A, pp. 689–701.10.1007/BF02642383 ↗
39. T.G. Langdon:Mater. Sci. Eng., 1994, vol. A174, pp. 225–30.10.1016/0921-5093(94)91092-8 ↗
40. A. Ball and M.M. Hutchison:Met. Sci. J., 1969, vol. 3, pp. 1–7.10.1016/0036-9748(69)90167-7 ↗
41. T.G. Langdon:Acta Metall. Mater., 1994, vol. 42, pp. 2437–43.10.1016/0956-7151(94)90322-0 ↗
42. H. Fukuyo, H.C. Tsai, T. Oyama, and O.D. Sherby:Iron Steel Inst. Jpn. Int., 1991, vol. 31, pp. 76–85.10.2355/isijinternational.31.76 ↗
43. S.X. McFadden, R.S. Mishra, R.Z. Valiev, A.P. Zhilyaev, and A.K. Mukherjee:Nature, 1999, vol. 398, pp. 684–86.10.1038/19486 ↗
44. S.J. Rothman, N.L. Peterson, L.J. Nowicki, and L.C. Robinson:Phys. Status Solidi (b), 1974, vol. 63, pp. K29-K33.10.1002/pssb.2220630151 ↗
45. O.D. Sherby and P.M. Burke:Progr. Mater. Sci., 1967, vol. 13, pp. 325–90.
46. F.A. Mohamed and T.G. Langdon:Scripta Metall., 1976, vol. 10, pp. 759–62.10.1016/0036-9748(76)90358-6 ↗
47. P.K. Chaudhury, V. Sivaramakrishnan, and F.A. Mohamed:Metall. Trans. A, 1988, vol. 19A, pp. 2741–52.10.1007/BF02645809 ↗
48. P.K. Chaudhury and F.A. Mohamed:Acta Metall., 1988, vol. 36, pp. 1099–1110.10.1016/0001-6160(88)90163-0 ↗
49. S. Yan, J.C. Earthman, and F.A. Mohamed:Phil. Mag. A, 1994, vol. 69, pp. 1017–38.10.1080/01418619408242236 ↗
50. S. Komura, M. Furukawa, Z. Horita, M. Nemoto, and T.G. Langdon:Mater. Sci. Eng., 2001, vol. A297, pp. 111–18.10.1016/S0921-5093(00)01255-7 ↗
51. K. Nakashima, Z. Horita, M. Nemoto, and T.G. Langdon:Acta Mater., 1998, vol. 46, pp. 1589–99.10.1016/S1359-6454(97)00355-8 ↗