journal article·2007-06

Development of a New Wrought Magnesium-Aluminum-Manganese Alloy AM30

Alan A. Luo, Anil K. Sachdev

Publisher page

Abstract

A new wrought magnesium alloy, AM30 (Mg-3 pct Al-0.4 pct Mn), has been developed. Compared to the current workhorse commercial wrought magnesium alloy AZ31 (Mg-3 pct Al-1 pct Zn), the new AM30 alloy has 20 to 50 pct higher maximum extrusion speed, up to 50 pct ductility improvement at temperatures up to 200 °C, with similar yield and tensile strengths. The tensile behavior of AM30 and AZ31 magnesium alloy tubes suggests a moderate temperature forming range of 100 °C to 175 °C in which strain hardening offsets plastic instability until fracture by cavity coalescence occurs. The AM30 alloy has slightly better formability than AZ31 at room and moderate temperatures, due to higher strain-hardening rates (dσ/de) and exponents (n). Microstructural evaluation indicates that twinning is the major deformation mechanism for these alloys at room and moderate temperatures in addition to slip mechanisms. Dynamic recrystallization (DRX) is observed at temperatures greater than ∼150 °C, which causes local instabilities to occur, leading to failure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. ASM Specialty Handbook, Magnesium and Magnesium Alloys, M.M. Avedesian and H. Baker, eds., ASM INTERNATIONAL, Materials Park, OH, 1999
2. R.S. Busk: Magnesium Product Design, Marcel Dekker, Inc., New York, NY, 1987
3. E.F. Emley: Principles of Magnesium Technology, Pergamon Press, Elmsford, NJ, 1966
4. T. Murai, S. Matsuoka, S. Miyamoto, and Y. Oki: Magnesium Alloys 2003, Materials Science Forum, Trans Tech Publications, Aedermannsdorf, Switzerland, 2003, vols. 419–422, pp. 349–5410.4028/www.scientific.net/MSF.419-422.349 ↗
5. C.H.J. Davies, M.R. Barnett: JOM, 2004, vol. 56 (5), pp. 22–2410.1007/s11837-004-0121-7 ↗
6. M.R. Barnett, J.Y. Yao, and C.H.J. Davies: Proc. Light Metals Technology Conf. 2003, A. Dahle, ed., CAST Center Pty Ltd., Australia, pp. 333–38
7. Y. Wang, X Zeng, W. Ding, A.A. Luo, A.K. Sachdev: in Magnesium Technology 2006, A.A. Luo, N.R. Neelameggham, R.S. Beals, eds., TMS, Warrendale, PA, 2006, pp. 245–48
8. R.A. Ayres, M.L. Wenner: Metall. Trans. A, 1979, vol. 10A, pp. 41–4610.1007/BF02686404 ↗
9. Aluminum for Automotive Body Sheet Panels, The Aluminum Association Publication AT3, The Aluminum Association, Inc., Washington, DC, 1998
10. O. Duygulu, S.R. Agnew: in Magnesium Technology 2003, H.I. Kaplan, ed., TMS, Warrendale, PA, 2003, pp. 237–42
11. W.F. Hosford, R.M. Caddell: Metal Forming: Mechanics and Metallurgy, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1983
12. P.E. Krajewski: in Magnesium Technology 2002, H.I. Kaplan, ed., TMS, Warrendale, PA, 2002, pp. 175–79
13. A.A. Luo, A.K. Sachdev: Mater. Sci. Forum, 2005, vols. 488–489, pp. 477–8210.4028/www.scientific.net/MSF.488-489.477 ↗
14. L. Jiang, J.J. Jonas, A.A. Luo, A.K. Sachdev, S. Godet: Scripta Mater., 2006, vol. 54, pp. 771–7510.1016/j.scriptamat.2005.11.029 ↗
15. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, Inc., New York, NY, 1986
16. A.A. Luo, A.K. Sachdev: in Magnesium Technology 2004, A.A. Luo, ed., TMS, Warrendale, PA, 2004, pp. 79–85
17. M.M. Myshlyaev, H.J. McQueen, A. Mwembela, E. Konopleva: Mater. Sci. Eng. A, 2002, vol. 337, pp. 121–3310.1016/S0921-5093(02)00007-2 ↗
18. X. Yang, H. Miura, T. Sakai: Mater. Sci. Forum, 2003, vols. 419–422, pp. 515–2010.4028/www.scientific.net/MSF.419-422.515 ↗
19. O. Sitdikov, R. Kaibyshev, T. Sakai: Mater. Sci. Forum, 2003, vols. 419–422, pp. 521–2610.4028/www.scientific.net/MSF.419-422.521 ↗
20. D. Ponge, G. Gottstein: Acta Mater., 1998, vol. 46, pp. 69–8010.1016/S1359-6454(97)00233-4 ↗
21. G. Itoh, Y. Iseno, and Y. Motohshi: Magnesium Alloys 2003, Materials Science Forum, Trans Tech Publications, Aedermannsdorf, Switzerland, 2003, vols. 419–422, pp. 355–58.10.4028/www.scientific.net/MSF.419-422.355 ↗
22. A.G. Beer, M.R. Barnett: in Magnesium Technology 2002, H.I. Kaplan, ed., TMS, Warrendale, PA, 2002, pp. 193–98
23. Y.-H. Chen, S. Lee, and J.-Y. Wang: Magnesium Alloys 2003, Materials Science Forum, Trans Tech Publications, Aedermannsdorf, Switzerland, 2003, vols. 419–422, pp. 383–8610.4028/www.scientific.net/MSF.419-422.383 ↗